Rane RS-1 Power Supply Instruction Manual

1. Вовед

The Rane RS-1 is a dedicated external power supply designed to provide reliable 120VAC power to a range of compatible Rane audio products. This manual provides essential information for the safe and correct setup, operation, and maintenance of your RS-1 power supply.

Please read this manual thoroughly before using the product to ensure proper function and to prevent damage to the unit or connected equipment.

2. Информации за безбедност

Извор на енергија: Connect the RS-1 only to a 120VAC, 60Hz power outlet. Ensure the outlet is properly grounded.
Вентилација: Do not block any ventilation openings. Ensure adequate airflow around the power supply.
Влага: Do not expose the unit to rain, moisture, or excessive humidity. Keep liquids away from the power supply.
Топлина: Избегнувајте поставување на уредот во близина на извори на топлина како што се радијатори, грејни тела, шпорети или други апарати што произведуваат топлина.
Кабли: Заштитете го кабелот за напојување од одење или стискање, особено на приклучоците, приклучните приклучоци и местото каде што тие излегуваат од апаратот.
Сервисирање: Не обидувајте се сами да го сервисирате овој производ. Пренесете ги сите сервиси на квалификуван сервисен персонал.
Исклучување: Unplug the power supply from the wall outlet during lightning storms or when unused for long periods.

3. Поставување

Follow these steps to correctly set up your Rane RS-1 Power Supply:

Идентификувајте компатибилен уред: Ensure your Rane audio product requires the RS-1 power supply and has the appropriate RJ-45 style power input port.
Поврзете се со уред: Carefully insert the RJ-45 style connector from the RS-1 power supply into the designated power input port on your Rane audio device. Ensure a secure connection.
Поврзете се со штекер: Plug the two-prong AC power cord of the RS-1 into a standard 120VAC, 60Hz wall outlet.
Вклучување: Once connected, your Rane audio device should receive power. Refer to your Rane audio device's manual for specific power-on procedures.

Rane RS-1 Power Supply unit with AC plug and RJ-45 style connector

Image: Rane RS-1 Power Supply. This image displays the Rane RS-1 Power Supply, a black rectangular unit with an attached power cord featuring a two-prong North American plug on one end and an RJ-45 style connector on the other, designed to provide power to compatible Rane audio equipment.

4. Упатства за работа

The Rane RS-1 is an external power supply that operates automatically once connected to a power source and a compatible Rane device. It does not have user-adjustable controls.

Ensure all connections are firm before applying power.
The power supply is designed for continuous operation within its specified voltagе и ватtagе граници.
Always disconnect the power supply from the wall outlet before disconnecting it from the Rane audio device, especially if the device does not have its own power switch.

5. Одржување

The Rane RS-1 Power Supply requires minimal maintenance. Follow these guidelines to ensure longevity:

Чистење: Disconnect the power supply from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosol sprays.
Инспекција: Periodically inspect the power cord and connectors for any signs of damage, fraying, or loose connections. If damage is observed, discontinue use and seek professional servicing.
Складирање: Кога не го користите подолго време, чувајте го напојувањето на ладно и суво место, подалеку од директна сончева светлина и екстремни температури.

6 Смена на проблеми

If you encounter issues with your Rane RS-1 Power Supply, refer to the following common troubleshooting steps:

Проблем	Можна причина	Решение
No power to connected Rane device.	Power supply not plugged into wall outlet. Ѕидниот штекер не е активен. RJ-45 style connector not fully inserted into Rane device. Неисправен напојувач или кабел.	Ensure the power supply is securely plugged into a live wall outlet. Тестирајте го ѕидниот штекер со друг уред. Verify the RJ-45 style connector is firmly seated in the Rane device's power input. If issues persist, contact Rane support for assistance.
Повремено напојување.	Loose connection at wall outlet or device. Damaged power cord or connector.	Проверете ги сите врски за затегнатост. Inspect the power cord and connectors for damage. Replace if necessary.

If these steps do not resolve the issue, contact Rane customer support or a qualified service technician.

7. Спецификации

Модел	RS1
Бренд	Ране
Влез волуменtage	120 волти наизменична струја
Извор на енергија	AC
Ватtage	1000 вати
Тип на струја	Type A - 2 pin (North American)
Тежина на ставката	1.3 фунти (0.59 кг)
Димензии	(Not specified in data)
UPC	687499101045
ASIN	B0002IU02S

8. Compatible Rane Devices

The Rane RS-1 Power Supply is compatible with the following Rane audio products:

AC 22B
AC 23B
AD 22d
АП 13
AVA 22d
КП 52
КП 64
DA 216a
DA 26
DC 24
DMS 22
ГЕ 130
ГЕ 215
ГЕ 30
HC 4
HC 6
МЛМ 42
MLM 82a
MM 8z
Пратеник 2
MP 22z
MP 24z
Пратеник 2016
MS 1b
ПЕ 17
PS 1
RA 30
SM 26B
СМ 82
СРМ 66
SSE 35
THX 22
THX 44
TTM 54i
ТТМ 56
VP12

9. Гаранција и поддршка

For information regarding warranty coverage, product registration, or technical support, please refer to the official Rane website or contact Rane customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Rane Official Webсајт: www.rane.com

Rane RS1