Heath Zenith SL-6167-C

Упатство за употреба на комплет безжичен ѕвонче за врата Heath Zenith SL-6167-C

Вовед

The Heath Zenith SL-6167-C is a wireless door chime kit designed for convenient installation and use. This kit includes a plug-in chime receiver and a battery-operated push button, offering a reliable transmission range of up to 100 feet. Users can select between an 8-note Westminster melody or a standard 2-note melody, with adjustable volume control to suit various preferences.

Информации за безбедност

Содржина на пакетот

Проверете дали сите компоненти се присутни во вашето пакување:

Heath Zenith SL-6167-C Wireless Plug-In Door Chime Kit components

An image showing the white plug-in chime receiver on the left and two white wireless push buttons on the right. The chime receiver has horizontal speaker grilles at the top.

Поставување

1. Инсталација со копче

  1. The wireless push button comes with a 12V battery pre-installed.
  2. Select a suitable mounting location near your door. Ensure the surface is clean and dry.
  3. Mount the push button using the provided screws or the double-sided adhesive tape. If using screws, pre-drill pilot holes if necessary.

2. Chime Receiver Setup

  1. Plug the chime receiver into any standard indoor 120V AC wall socket.
  2. For optimal signal reception, choose a central location within your home, away from large metal objects or other electronic devices that may cause interference.

3. Синхронизација (Спарување)

The chime receiver and push button are typically pre-synchronized at the factory. To test, press the push button. If the chime sounds, the units are synchronized. If not, refer to the troubleshooting section for re-synchronization steps.

Упатства за работа

Прилагодување на јачината на звукот

Locate the volume control on the side or front of the chime receiver. Rotate or slide this control to increase or decrease the sound level to your desired volume.

Changing Chime Melody

The chime offers an 8-note Westminster melody and a 2-note melody. Refer to the chime unit for a dedicated button or switch to cycle through the available melody options.

Одржување

Push Button Battery Replacement

When the push button stops functioning or its transmission range significantly decreases, it is time to replace the battery. Open the push button casing, carefully remove the old 12V battery, and insert a new one, ensuring correct polarity (+/-). Close the casing безбедно.

Чистење

Clean the chime receiver and push button with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.

Решавање проблеми

ПроблемМожна причинаРешение
Chime does not sound when push button is pressed.Chime receiver not powered.
Push button battery is dead or low.
Единиците се надвор од домет или се попречени.
Units are not synchronized.
Ensure chime receiver is securely plugged into a working electrical outlet.
Replace the 12V battery in the push button.
Reposition the chime receiver or push button to reduce distance or obstructions. Ensure they are within 100 feet.
Perform re-synchronization: Unplug receiver, remove push button battery. Reinsert push button battery, then plug in receiver. Press push button immediately.
Reduced transmission range.Пречки (дебели ѕидови, метални предмети).
Low push button battery.
Try repositioning the chime receiver or push button to minimize obstructions.
Replace the 12V battery in the push button.

Спецификации

Гаранција

This Heath Zenith product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty service, please retain your proof of purchase.

Поддршка

For further assistance, technical support, or to inquire about replacement parts, please contact Heath Zenith customer service. Refer to the product packaging or the manufacturer's webстраница за тековни информации за контакт.