Eldom 72325NMP

Eldom 10L Pressure-Resistant Hot Water Tank/Boiler

Model: 72325NMP

Brand: Eldom

Вовед

Thank you for choosing the Eldom 72325NMP 10-liter electric hot water boiler. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new appliance. Please read it thoroughly before use and keep it for future reference.

Инструкции за безбедност

Секогаш почитувајте ги следниве безбедносни упатства за да спречите повреда или оштетување на апаратот:

  • Уверете се дека апаратот е правилно заземјен.
  • Do not operate the boiler if the power cord or plug is damaged.
  • Инсталацијата мора да ја изврши квалификуван професионалец во согласност со локалните прописи.
  • Не блокирајте го вентилот за ослободување на притисокот.
  • Чувајте ги децата и миленичињата подалеку од апаратот за време на работата.
  • Исклучете го напојувањето пред да вршите какво било одржување или чистење.
  • Овој уред е дизајниран само за домашна употреба.

Производот завршиview

The Eldom 72325NMP is a compact and efficient hot water tank. Its design allows for versatile installation, either above a sink or within a suspended cabinet. The front panel features an intuitive control dial for temperature adjustment and an illuminated power switch.

Eldom 10L Pressure-Resistant Hot Water Tank

Предна страна view of the Eldom 10L hot water tank, showing its compact white casing, the Eldom logo, and the control panel at the bottom with a temperature dial and a red power switch. A power cord with a European plug is visible.

Поставување

The Eldom 72325NMP boiler is designed for pressure-resistant operation and comes with an installation package. Professional installation is recommended.

Чекори за инсталација:

  1. Монтирање: Securely mount the boiler in the desired location (above sink or in cabinet) using appropriate fasteners. Ensure the mounting surface can support the weight of the boiler when full.
  2. Приклучок за вода: Connect the 1/2 inch cold water inlet and hot water outlet. The boiler includes an inlet with a combined safety valve; ensure this is correctly installed on the cold water supply line.
  3. Електрична врска: Connect the power cord to a suitable 230V electrical outlet. Ensure the outlet is properly grounded and rated for 2000W.
  4. Пополнување на резервоарот: Before powering on, open a hot water tap to allow the tank to fill completely and air to escape. Close the tap once water flows steadily.

Упатства за работа

Operating your Eldom hot water boiler is straightforward:

  1. Вклучување: Press the illuminated red power switch located on the front panel to turn on the boiler. The light will indicate that the unit is receiving power.
  2. Поставете температура: Use the external mechanical thermostat dial to set your desired water temperature. The dial typically ranges from a minimum setting to a maximum, often with an 'ECO' mark for energy-efficient operation.
  3. Циклус на греење: The boiler will begin heating the water to the set temperature. The heating time from 120C to 650C is approximately 19 minutes.
  4. Достава на вода: Once the water reaches the set temperature, it is ready for use. Open any hot water tap to dispense heated water.
  5. Исклучено: To turn off the boiler, press the illuminated power switch again.

Одржување

Regular maintenance ensures the longevity and efficiency of your Eldom hot water boiler:

  • Чистење: Periodically wipe the exterior of the boiler with a soft, damp крпа. Не користете абразивни средства за чистење или растворувачи.
  • Anode Protection: The boiler features an anode for corrosion protection. It is recommended to have this anode checked and replaced by a qualified technician every 1-2 years, depending on water quality.
  • Проверка на сигурносен вентил: Annually check the safety valve by briefly opening it to ensure it is not blocked and can release pressure. Follow manufacturer guidelines for this procedure.
  • Декалирање: In areas with hard water, limescale buildup can occur. Descaling should be performed by a qualified technician when necessary to maintain heating efficiency.

Решавање проблеми

If you encounter issues with your boiler, refer to the following common problems and solutions:

  • Нема топла вода:
    • Check if the power switch is on and the indicator light is illuminated.
    • Проверете дали прекинувачот на струјното коло не се исклучил.
    • Ensure the thermostat is set to a desired temperature.
  • Водата не е доволно топла:
    • Increase the temperature setting on the thermostat.
    • Allow sufficient time for the water to heat up.
  • Протекување на вода:
    • Check all water connections for tightness.
    • If leaking from the safety valve, this may indicate excessive pressure; consult a professional.
  • Невообичаени звуци:
    • Gurgling or popping sounds may indicate limescale buildup. Professional descaling may be required.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact qualified service personnel.

Спецификации

КарактеристикаДетал
ПроизводителЕлдом
Димензии на производот (Д x Ш x В)28.5 x 28.8 x 43 cm
Број на модел на ставка72325NMP
БојаБело
СтилЗатворен
МатеријалЛегуриран челик
Тип на извор на енергијаЕлектричен со кабел
Voltage230 волти
Моќ2000 вати
Количина на артикли1
Број на парчиња1
Максимален притисок8 барови
Вклучени компонентиРезервоар за топла вода
Вклучени батериибр
Потребни батериибр
Тежина8 килограми (17.64 фунти)
Достапност на резервни деловиИнформациите се недостапни
ASINB006LRJ1S8
Датум на почеток Достапно на Amazon.com.be4 јуни 2022 година
Прекинато од производителотбр

Гаранција и поддршка

The Eldom 72325NMP hot water boiler comes with a comprehensive warranty:

  • Boiler Tank: 3 години гаранција.
  • Електрични компоненти: 2 години гаранција.

For technical support, warranty claims, or service inquiries, please contact your retailer or the Eldom customer service department. Keep your proof of purchase for warranty validation.

© 2024 Eldom. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.