Упатство за користење на X10 прекинувач за затемнување (WS12A) 500W

1. Вовед

The X10 Dimmer Switch (WS12A) is designed to replace traditional dimmer switches, enabling remote control capabilities for your dimmable wired lighting fixtures. This switch controls incandescent lights up to 500 Watts and integrates with X10 home automation systems. It supports both local and remote operation for ON/OFF, BRIGHTEN/DIM functions, and responds to ALL LIGHTS ON X10 commands.

This manual provides detailed instructions for the installation, operation, and maintenance of your X10 Dimmer Switch.

Слика 1: X10 Dimmer Switch (WS12A). A white X10 Dimmer Switch (model WS12A) with a rocker-style paddle. The switch is designed for wall installation and includes a small power cutoff switch at the bottom of the rocker.

2. Клучни карактеристики

• Provides local and X10 control for a wired dimmable light.
• Controls incandescent lights up to 500 Watts.
• Works in single-pole or multi-way applications.
• Includes white and ivory rocker paddles for aesthetic customization.
• Does not require a neutral wire for installation.
• Features a power cutoff switch for safe bulb changing.

3. Содржина на пакетот

Please verify that all items are present before beginning installation:

• X10 Dimmer Switch (WS12A)
• White Rocker Paddle
• Ivory Rocker Paddle

Забелешка: Плочата за ѕид не е вклучена и мора да се купи одделно.

4. Информации за безбедност

ПРЕДУПРЕДУВАЊЕ: To avoid fire, shock, or death; turn off power at the circuit breaker or fuse box and test that the power is off before wiring.

• Овој уред е наменет за инсталација во согласност со Националниот код за електрична енергија и локалните прописи.
• Се препорачува монтажата да ја изврши квалификуван електричар.
• Do not use with non-dimmable loads, motor loads, or fluorescent lighting. This switch is designed for incandescent loads only.
• Обезбедете ја вкупната ватиtage of connected lights does not exceed 500 Watts.
• Не инсталирајте го производот ако изгледа оштетен.

5. Инструкции за инсталација

5.1 Пред да започнете

1. Исклучете го напојувањето at the circuit breaker or fuse box for the light switch location.
2. Remove the existing wallplate and switch from the wall box.
3. Identify the line (hot), load, and ground wires. This switch does not require a neutral wire.

5.2 Wiring the Dimmer Switch

The X10 Dimmer Switch can be used in single-pole applications (controlling lights from one location) or 3-way/4-way applications (controlling lights from multiple locations). For multi-way applications, a companion switch (sold separately) is required.

• Connect the line (hot) wire to the designated terminal on the dimmer switch.
• Connect the load wire (to the light fixture) to the designated terminal on the dimmer switch.
• Connect the ground wire to the green ground screw on the dimmer switch.
• For multi-way installations, refer to the wiring diagram provided with your companion switch.

Secure all wire connections using screw terminals. Ensure no bare wire is exposed.

5.3 Последни чекори

1. Внимателно притиснете го жичниот прекинувач во ѕидната кутија.
2. Mount the switch to the wall box using the provided screws.
3. Attach the desired rocker paddle (white or ivory) to the switch.
4. Install a compatible wallplate (not included).
5. Вратете го напојувањето на прекинувачот.

6. Упатства за работа

6.1 Локална контрола

• ВКЛУЧИ/ИСКЛУЧИ: Press the top of the rocker to turn the light ON. Press the bottom of the rocker to turn the light OFF.
• BRIGHTEN: Press and hold the top of the rocker to gradually brighten the light. Release when the desired brightness is reached.
• ДИМ: Press and hold the bottom of the rocker to gradually dim the light. Release when the desired brightness is reached.
• The dimmer takes approximately 3 seconds to adjust lights from Off to Full Bright and vice versa.

6.2 Remote X10 Control

The X10 Dimmer Switch responds to standard X10 commands from compatible X10 controllers (sold separately). Ensure your X10 system is properly configured with the correct house and unit codes for the dimmer switch.

• ВКЛУЧЕНО/ИСКЛУЧЕНО: The switch will respond to X10 ON and OFF commands for its assigned unit code.
• BRIGHTEN/DIM: The switch will respond to X10 BRIGHTEN and DIM commands for its assigned unit code.
• ALL LIGHTS ON: The switch will respond to the X10 ALL LIGHTS ON command for its assigned house code.

6.3 Power Cutoff Switch

A small power cutoff switch is located directly below the main rocker switch. This allows you to safely cut power to the connected light fixture for bulb changing or maintenance without needing to go to the circuit breaker.

7. Одржување

• To clean the dimmer switch, ensure power is OFF at the circuit breaker.
• Избришете ја површината со мека, гamp крпа. Не користете абразивни средства за чистење или растворувачи.
• Ensure the switch is completely dry before restoring power.

8 Смена на проблеми

9. Спецификации

10. Гаранција и поддршка

Specific warranty information for the X10 Dimmer Switch (WS12A) is not provided in this manual. For details regarding warranty coverage, technical support, or replacement parts, please contact the manufacturer directly or refer to the product packaging.

You may also visit the official X10 webстраница за дополнителни ресурси и информации за контакт.