SEIKO SQ767W Digital Alarm Clock User Manual

1. Вовед

Ви благодарам за купувањетоasing the SEIKO SQ767W Digital Alarm Clock. This compact and versatile clock features a digital display, dual alarms, a calendar, and displays both temperature and humidity. It is designed for convenience on your bedside table or desktop. This manual provides essential information for setup, operation, and maintenance to ensure optimal performance.

Слика 1: Предна страна view of the SEIKO SQ767W Digital Alarm Clock.

2. Карактеристики на производот

• Двојни аларми: Поставете две независни времиња на алармот.
• Radio Wave Correction: Automatically corrects time by receiving standard radio waves (40 kHz/60 kHz automatic selection). Includes a radio wave off function.
• Дигитален екран: Clear display of time, date, temperature, and humidity.
• Функција за одложување: Temporarily pauses the alarm.
• Функција на светлина: Го осветлува екранот за видливост при слаба осветленост.
• Alarm Monitor: Allows checking the alarm sound.
• Alarm Auto Stop: Alarm automatically stops after 5 minutes.
• Целосно автоматски календар: Displays the correct date automatically.
• Приказ на температура/влажност: Provides current room temperature and humidity readings.

3. Поставување

3.1 Инсталација на батерија

1. Отворете го капакот на преградата за батерии што се наоѓа на задниот дел од часовникот.
2. Insert two (2) AA manganese batteries, ensuring correct polarity (+/-).
3. Добро затворете го капакот на преградата за батерии.

The clock requires 2 AA batteries, which are included with the product.

3.2 Initial Power On and Radio Wave Reception

Upon battery installation, the clock will attempt to receive radio waves to set the time automatically. For best reception:

• Ставете го часовникот во близина на прозорец.
• Avoid locations with potential radio interference, such as:
  • Inside buildings, basements, or areas with thick walls.
  • Во близина на висок волуменtage lines, TV towers, or train rails.
  • Close to electronic appliances (TVs, refrigerators, air conditioners, computers, etc.).
  • In vehicles (automotive, train, airplane).
  • Near metal furniture like steel desks.

If radio waves are not received, the clock will operate with quartz accuracy. Reception may vary depending on environmental conditions.

Figure 2: Radio wave coverage map for time synchronization.

4. Упатства за работа

The control buttons are located on the back of the clock. Refer to Figure 3 for button identification.

Слика 3: Назад view со контролни копчиња.

4.1 Поставување време и датум

• Automatic Setting (Radio Wave): The clock attempts to set the time and date automatically via radio wave reception. Ensure the clock is placed in an optimal reception area.
• Рачно поставување: If radio wave reception is not possible or desired, you can manually set the time and date using the '時刻/日付合わせ' (Time/Date Adjustment) button and other relevant controls on the back. Consult the detailed instructions for specific button sequences.

4.2 Поставување аларми (Аларм 1 и Аларм 2)

Часовникот има два независни аларми.

1. Use the 'アラーム時刻合わせ' (Alarm Time Adjustment) button to select Alarm 1 or Alarm 2.
2. Adjust the desired alarm time using the appropriate adjustment buttons.
3. Toggle the 'アラーム1 ON/OFF' or 'アラーム2 ON/OFF' switch to activate or deactivate each alarm.

4.3 Snooze and Light Function

Press the large button on top of the clock to activate the snooze function when an alarm sounds. This button also illuminates the display temporarily when pressed outside of an alarm event.

4.4 Приказ на температура и влажност

The clock continuously displays the current room temperature and humidity on its screen. No special action is required to view these readings.

Figure 4: Close-up of the digital display.

5. Одржување

5.1 Чистење

Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the casing или дисплеј.

5.2 Замена на батеријата

Replace batteries when the display dims or the clock's functions become unreliable. Always replace both batteries at the same time with new AA manganese batteries. Dispose of used batteries according to local regulations.

6 Смена на проблеми

• Clock not displaying time/functions: Проверете ја инсталацијата на батериите и осигурајте се дека батериите не се испразнети.
• Времето е неточно: Ensure the clock is in an optimal location for radio wave reception. If automatic correction fails, manually set the time.
• Алармот не се огласува: Verify that the alarm is set to 'ON' and the alarm time is correctly configured.
• Екранот е затемнет: Заменете ги батериите.
• Radio wave reception issues: Relocate the clock away from electronic devices, metal objects, or large structures that may interfere with signals.

7. Спецификации

8. Гаранција и поддршка

For warranty information or technical support, please refer to the documentation included with your purchase or contact SEIKO customer service. Keep your purchase receipt as proof of purchase.