EZ-FLO Two-Handle Add-On Shower Diverter Bathcock

1. Производот завршиview

The EZ-FLO Two-Handle Add-On Shower Diverter Bathcock, Model 11129, is designed to add shower functionality to bathtubs that do not originally include a shower feature. Constructed from durable brass with a polished chrome finish, this unit offers both reliability and a contemporary aesthetic. It is suitable for traditional clawfoot and roll-top style tubs, providing a practical solution for converting a bath-only setup to include a shower.

Слика 1.1: напред view of the EZ-FLO Two-Handle Add-On Shower Diverter Bathcock.

2. Карактеристики

• Издржлива конструкција: Made from high-impact brass with a polished chrome finish for corrosion resistance and a sleek appearance.
• Two-Handle Operation: Features two handles for precise control over hot and cold water flow.
• Integrated Diverter Spout: A pull-up diverter on the spout allows for easy transition between bathtub faucet use and showerhead use.
• Стандардни врски: Equipped with standard 3/4 inch Male Inlet Pipe (MIP) diverter spout connections and a 3/8 inch riser connection for compatibility with most bathtubs.
• Универзално вклопување: Designed to fit most bathtubs with 3-3/8 inch centers.

Слика 2.1: Горе view showing the two handles and diverter knob.

3. Информации за безбедност

Внимателно прочитајте ги сите упатства пред инсталација и употреба. Непочитувањето на овие упатства може да резултира со материјална штета или телесна повреда.

• Секогаш исклучувајте го главниот довод на вода пред да започнете со какви било водоводни работи.
• Носете соодветна лична заштитна опрема, како што се заштитни очила и ракавици.
• Проверете дали сите врски се безбедни за да спречите протекување. Не затегнувајте премногу.
• Доколку не сте сигурни за кој било чекор, консултирајте се со квалификуван водоводџија.
• Чувајте ги малите делови подалеку од деца.

4. Содржина на пакетот

Проверете дали сите компоненти се присутни пред да започнете со инсталацијата:

• EZ-FLO Two-Handle Add-On Shower Diverter Bathcock (Main Unit)
• Монтажни навртки и подлошки
• Рачки завртки

Слика 4.1: Експлодирано view of the bathcock components.

5. Инструкции за инсталација

This section provides general guidelines for installing the EZ-FLO Shower Diverter Bathcock. Specific plumbing configurations may vary.

Потребни алатки:

• Прилагодлив клуч или клешти
• Plumber's Tape (Thread Seal Tape)
• Шрафцигер (глава на Филипс)

Чекори за инсталација:

1. Подгответе го просторот за инсталација: Ensure the main water supply to the bathtub is turned off. Drain any remaining water from the existing faucet.
2. Remove Existing Faucet (if applicable): If replacing an old bathcock, carefully disconnect and remove it. Clean the mounting surface thoroughly.
3. Нанесете водоводџиска лента: Wrap plumber's tape clockwise around the threads of the 3/4 inch MIP connections on the new bathcock.
4. Position the Bathcock: Insert the threaded connections of the bathcock through the mounting holes on your bathtub. Ensure the spout is facing the correct direction.
5. Обезбедете ги врските: From underneath the tub, thread the mounting nuts onto the connections. Hand-tighten first, then use an adjustable wrench or pliers to tighten securely. Do not overtighten, as this can damage the connections.
6. Connect Riser (if applicable): If you are connecting a shower riser, apply plumber's tape to the 3/8 inch top tap threads and securely attach the riser.
7. Инсталирајте рачки: Place the handles onto their respective stems and secure them with the provided screws using a Phillips head screwdriver.
8. Тест за протекување: Slowly turn the main water supply back on. Check all connections for leaks. If leaks occur, gently tighten the connections further.

Image 5.1: Illustration of bathcock installation onto a tub.

6. Упатства за работа

Using your EZ-FLO Shower Diverter Bathcock is straightforward:

• To Fill the Bathtub: Turn the hot and cold water handles to achieve the desired water temperature and flow. Water will flow from the main spout.
• To Use the Shower: While water is flowing from the main spout, pull up the diverter knob located on top of the spout. This will redirect water flow to the connected showerhead.
• To Return to Bathtub Flow: Push the diverter knob back down. Water will resume flowing from the main spout.

7. Одржување

Proper care will ensure the longevity and appearance of your bathcock:

• Чистење: Clean the chrome finish regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome fixtures. Avoid harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.
• Спречување на истекување: Periodically check connections for any signs of leaks. Tighten connections gently if necessary.
• Функција за пренасочување: If the diverter becomes stiff or difficult to operate, a small amount of silicone-based lubricant can be applied to the moving parts.

8 Смена на проблеми

9. Спецификации

Image 9.1: Dimensional drawing of the bathcock.

10. Информации за гаранцијата

EZ-FLO products are manufactured to high-quality standards and are backed by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official EZ-FLO webстраница. Зачувајте го доказот за купување за гаранциски побарувања.

11. Поддршка за корисници

If you have any questions, require assistance with installation, or need to troubleshoot an issue not covered in this manual, please contact EZ-FLO customer support:

• Webсајт: Visit the EZ-FLO Store on Amazon
• Општи прашања: Refer to the contact information provided on the product packaging or the official EZ-FLO webсајт.