Легранд 067001

Legrand 067001 Céliane VMC Switch Instruction Manual

Модел: 067001 | Бренд: Legrand

1. Вовед

This instruction manual provides essential information for the safe installation, operation, and maintenance of the Legrand 067001 Céliane VMC Switch. This device is designed for controlling Ventilation Mécanique Contrôlée (VMC) systems, operating at 230V with a 10AX current rating.

2. Информации за безбедност

WARNING: Risk of electric shock. Installation and maintenance should only be performed by a qualified electrician in accordance with national and local electrical codes.

  • Always disconnect power at the main circuit breaker before installing or servicing the switch.
  • Осигурајте се дека сите врски се сигурни и правилно изолирани.
  • Do not operate the switch with wet hands or in damp услови.
  • Овој производ е дизајниран само за внатрешна употреба (IP20 рејтинг).
  • Не надминувајте го наведениот волtage (230V) or current (10A) ratings.

3. Содржина на пакетот

  • 1 x Legrand 067001 Céliane VMC Switch Module

Note: Faceplate and mounting frame are typically sold separately and are required for complete installation.

4. Поставување и инсталација

The Legrand 067001 switch is designed for wall or surface mounting. Proper installation is crucial for safety and functionality.

  1. Исклучување на струја: Before beginning any installation, ensure the main power supply to the circuit is turned off at the circuit breaker. Verify with a voltagд тестер.
  2. Монтирање: Install the switch module into a compatible mounting box or frame (not included). This switch supports wall or surface mounting configurations.
  3. Приклучоци за жици:
    • Identify the Line (L) and Neutral (N) wires from your electrical supply.
    • Connect the electrical wires to the corresponding terminals on the switch module. The connection type is crimping. Ensure a secure and tight connection for each wire.
    • Refer to the wiring diagram provided with your VMC system or consult a qualified electrician for specific connection requirements.
  4. Обезбедете го модулот: Once wired, secure the switch module within its mounting frame or box.
  5. Инсталирајте Faceplate: Attach the decorative faceplate (not included) over the switch module.
  6. Вратете ја моќноста: Откако ќе заврши инсталацијата и сите компоненти ќе бидат безбедно наместени, вратете го напојувањето на главниот прекинувач.
Legrand 067001 Céliane VMC Switch module, showing internal components and connection terminals.

Image: Legrand 067001 Céliane VMC Switch module. This image displays the grey plastic housing, the internal mechanism, and the terminals for electrical connections, including 'N' for Neutral and 'L' for Line, indicating its wiring points.

5. Упатства за работа

The Legrand 067001 is a push-button type switch with an ON-OFF operating mode, designed for controlling VMC systems. It features a call button with a luminous indicator.

  • Вклучување/исклучување: Press the push-button to toggle the connected VMC system between ON and OFF states.
  • Светлосен индикатор: The integrated luminous indicator provides visual feedback on the switch's status or can be used as a call button depending on the specific VMC system configuration.

6. Одржување

The Legrand 067001 VMC Switch requires minimal maintenance.

  • Чистење: To clean the switch, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the switch or create an electrical hazard.
  • Инспекција: Периодично проверувајте го прекинувачот за какви било знаци на оштетување, лабави врски или промена на бојата. Доколку забележите какви било проблеми, исклучете го напојувањето и консултирајте се со квалификуван електричар.

7 Смена на проблеми

If the switch or connected VMC system is not functioning correctly, consider the following:

  • Без моќност: Check if the circuit breaker for the switch is tripped. Reset if necessary.
  • Прекинувачот не реагира: Ensure all wiring connections are secure. Loose connections can prevent proper operation.
  • Luminous Indicator Not Working: Verify the wiring for the indicator light is correctly connected according to your VMC system's specifications.
  • Постојани проблеми: If troubleshooting steps do not resolve the issue, disconnect power and contact a qualified electrician for further assistance. Do not attempt repairs yourself.

8. Спецификации

КарактеристикаСпецификација
Број на модел067001
БрендЛегранд
Оперативен волtage230 волти
Тековен рејтинг10 A (10AX)
Оцена на моќност1600 вати
Работен режимВКЛУЧЕНО ИСКЛУЧЕНО
Тип на прекинувачКопче со притискање
Тип на контактНормално затворено
Тип на конекторСтегање
МатеријалPlastic (housing), Copper (contact)
Тип на монтирањеWall Mount or Surface Mount
Оценка за IPIP20
Тежина6 грама
БојаГреј

9. Гаранција и поддршка

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Legrand customer service directly. Warranty terms may vary based on region and retailer.

You can find more information on the official Legrand webсајт: www.legrand.com

© 2023 Легранд. Сите права се задржани. Информациите може да се променат без претходна најава.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.