M-Wave M30HCW Bicycle Computer

1. Вовед

Thank you for choosing the M-Wave M30HCW Wireless Bicycle Computer. This device is designed to enhance your cycling experience by providing comprehensive data about your rides. It features wireless transmission for a clean setup and a wide range of functions to track your performance and progress. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your device.

Image 1.1: M-Wave M30HCW Bicycle Computer. This image displays the main unit of the M-Wave M30HCW bicycle computer, showcasing its compact design and clear display.

2. Информации за безбедност

• Always prioritize road safety. Do not operate the computer or adjust settings while cycling in traffic.
• Ensure the computer is securely mounted to prevent it from detaching during your ride.
• Чувајте ги батериите подалеку од дофат на деца. Доколку се проголта, веднаш побарајте лекарска помош.
• Отстранете ги батериите според локалните прописи. Не ги горете.
• The device has an Ingress Protection rating of IP44, meaning it is protected against splashing water from any direction. It is not designed for submersion.

3. Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

• M-Wave M30HCW Cyclocomputer Unit
• Wireless Speed/Cadence Sensor
• Магнет на тркала
• Mounting Bracket (for handlebar or stem)
• Mounting Ties/Bands
• CR2 Batteries (4 required, included)

4. Поставување

4.1. Инсталација на батерија

1. Open the battery compartment on the back of the cyclocomputer unit and the wireless sensor.
2. Insert the CR2 batteries, ensuring correct polarity (+/-).
3. Добро затворете ги преградите за батерии.

4.2. Mounting the Cyclocomputer

The M-Wave M30HCW features tool-free mounting for quick installation.

1. Attach the mounting bracket to your bicycle's handlebar or stem using the provided ties or bands. Ensure it is firmly secured and positioned for easy viewинг.
2. Slide the cyclocomputer unit onto the mounting bracket until it clicks into place.

4.3. Mounting the Wireless Sensor and Magnet

1. Attach the wireless sensor to the front fork of your bicycle, ensuring it is aligned with the wheel spokes.
2. Mount the wheel magnet to a spoke on the front wheel. Position the magnet so it passes within 5mm of the sensor as the wheel rotates.
3. Ensure the sensor and magnet are securely fastened and do not interfere with wheel rotation or braking.

4.4. Почетна конфигурација

After battery installation, the computer will typically prompt you for initial settings. Use the buttons (usually MODE and SET) to navigate and confirm selections.

• Единици: Select between metric (km/h, km) and imperial (mph, miles) units.
• Големина на тркала: Input your wheel circumference in millimeters (mm). Refer to your bicycle tire for this value or measure it accurately. This is crucial for accurate speed and distance readings.
• Време: Set the current time (24-hour or 12-hour format).
• Тежина: Enter your body weight for calorie calculation.

5. Упатства за работа

The M-Wave M30HCW features an LED backlit display for easy reading and is operated via buttons, typically located on the front or bottom of the unit.

5.1. Основни функции

The computer automatically powers on and off. When you start cycling, it will activate and begin recording data. When stationary, it will enter a power-saving mode.

• Тековна брзина: Displays your real-time cycling speed.
• Просечна брзина: Shows the average speed for your current ride.
• Максимална брзина: Records the highest speed achieved during your ride.
• Растојание на патување: Measures the distance covered in the current ride.
• Километража: Tracks the total accumulated distance.
• Време на возење: Records the duration of your current ride.
• Каденца: Measures your pedaling revolutions per minute (RPM).
• Алтиметар: Provides altitude measurements for climb tracking.
• Heart Rate Monitor/Alarm: (If applicable, requires compatible HR sensor, not included with base unit) Monitors heart rate and can alert if thresholds are exceeded.
• Потрошувачка на калории: Estimates calories burned based on ride data and user weight.
• Термометар: Ја прикажува температурата на околината.

5.2. Работа со копче

Typically, the computer will have one or two buttons for navigation and selection:

• Копче MODE: Press briefly to cycle through different display modes (e.g., speed, distance, time). Press and hold to enter settings or reset trip data.
• Копче SET: Used to confirm selections or adjust values within settings menus.

Refer to the on-screen prompts for specific button functions during setup and operation.

6. Одржување

• Чистење: Избришете ја компјутерската единица и сензорот со мека, дamp крпа. Не користете абразивни средства за чистење или растворувачи.
• Отпорност на вода: The device is IP44 rated, protecting it from splashing water. Avoid high-pressure washing or submerging the unit.
• Замена на батерија: Заменете ги батериите кога на екранот ќе се појави индикаторот за слаба батерија. Обезбедете соодветен тип на батерија и поларитет.
• Складирање: If storing the bicycle for an extended period, remove the batteries from the computer and sensor to prevent leakage.

7 Смена на проблеми

8. Спецификации

9. Гаранција и поддршка

For warranty information and technical support, please refer to the documentation provided with your purchase or contact M-Wave customer service directly. Keep your proof of purchase for any warranty claims.