M-Wave MWAVE CVC1012 Computer 14 F M14W

1. Вовед

The M-Wave M14W is a wired bicycle computer designed to provide essential cycling data. It features 14 functions to help you track your rides effectively. Please read this manual carefully before installation and use to ensure proper function and longevity of your device.

Слика 1: Предна страна view of the M-Wave M14W bicycle computer, showing the display with current speed (37.0 KM/hr) and distance (2.625).

2. Содржина на пакетот

Before proceeding with installation, verify that all components are present in the package:

• M-Wave M14W Bicycle Computer Unit
• Wired Sensor and Cable
• Држач за монтирање
• Магнет на тркала
• Cable Ties for securing
• Батерија CR2 (претходно инсталирана или вклучена одделно)
• Упатство за употреба (овој документ)

Figure 2: The M-Wave M14W bicycle computer shown in its retail packaging, indicating wireless functionality and 14 functions.

3. Поставување и инсталација

3.1 Инсталација на батерија

The M-Wave M14W uses a CR2 battery. The battery may be pre-installed. If not, or if you need to replace it:

1. Locate the battery compartment on the back of the computer unit.
2. Use a small coin or screwdriver to open the battery cover by twisting it counter-clockwise.
3. Вметнете ја батеријата CR2 со позитивната (+) страна свртена нагоре.
4. Вратете го капакот на батеријата и завртете го во насока на стрелките на часовникот за да го прицврстите.

Слика 3: Заден дел view of the M-Wave M14W unit, showing the battery compartment and reset button.

3.2 Mounting the Computer and Sensor

Follow these steps to securely mount the computer and its wired sensor:

1. Држач за монтирање: Attach the mounting bracket to your handlebar or stem using the provided straps or cable ties. Ensure it is firmly secured and positioned for easy viewинг.
2. Поставување на сензорот: Mount the wired sensor to the front fork of your bicycle, ensuring it is aligned with the wheel magnet. The sensor should be positioned so that the magnet passes within 5mm of the sensor as the wheel rotates.
3. Инсталација на магнети: Attach the magnet to a spoke on your front wheel. Adjust its position so it aligns with the sensor.
4. Рутирање на кабли: Route the sensor cable along the fork and frame, securing it with cable ties to prevent it from interfering with moving parts or getting snagged. Plug the cable into the computer unit's port.
5. Computer Attachment: Slide the M14W computer unit onto the mounting bracket until it clicks into place.

3.3 Почетни поставки

After installation, you will need to configure the basic settings:

1. Избор на единица: Притиснете го РЕЖИМ button to cycle through settings. When prompted, select your preferred unit of speed (KM/hr or MPH) using the ПОСТАВЕТЕ button. Confirm with РЕЖИМ.
2. Обиколка на тркалото: This is crucial for accurate speed and distance readings.
   • Refer to your bicycle tire's sidewall for its size (e.g., 700x23C, 26x1.95).
   • Consult a wheel circumference chart (available online or in bicycle shops) to find the corresponding value in millimeters (mm).
   • Enter this value into the computer using the ПОСТАВЕТЕ button to adjust digits and РЕЖИМ за да преминете на следната цифра.
3. Initial Odometer Setting (Optional): Some models allow setting an initial odometer value. Follow on-screen prompts if this option appears.

4. Упатства за работа

The M14W features two primary buttons: ПОСТАВЕТЕ и РЕЖИМ.

• Копче MODE: Used to cycle through different display functions (e.g., Speed, Distance, Ride Time, Odometer). In setting mode, it confirms selections or moves to the next setting.
• Копче SET: Used to adjust values during setup (e.g., wheel circumference, time). In some modes, it may reset specific trip data.

4.1 Display Functions (14 Functions)

Притиснете го РЕЖИМ копчето за да view следните функции:

4.2 Resetting Trip Data

To reset trip-specific data (Trip Distance, Average Speed, Maximum Speed, Ride Time), typically you will press and hold the ПОСТАВЕТЕ button for a few seconds while in the relevant display mode. Refer to the on-screen prompts for confirmation.

5. Одржување

5.1 Чистење

Clean the computer unit and sensor regularly with a soft, damp крпа. Не користете абразивни средства за чистење или растворувачи, бидејќи тие можат да го оштетат екранот илиasing. The unit has an IP44 rating, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. Avoid submerging the unit in water.

5.2 Замена на батеријата

When the display becomes dim or erratic, it's time to replace the CR2 battery. Follow the steps outlined in Section 3.1. Dispose of old batteries responsibly according to local regulations.

5.3 Складирање

If storing the bicycle computer for an extended period, it is recommended to remove the battery to prevent leakage and potential damage to the unit.

6 Смена на проблеми

If you encounter issues with your M-Wave M14W computer, try the following solutions:

7. Спецификации

8. Гаранција и поддршка

M-Wave products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official M-Wave website. In case of technical issues or questions not covered in this manual, please contact M-Wave customer support through their official channels.

Figure 4: M-Wave brand logo, "Your World of Cycling".

For more information and product updates, you may visit the official M-Wave webсајт: www.m-wave-bike.com