HyperX Savage DDR4 Memory Module User Manual

Вовед

This manual provides essential information for the installation, operation, and maintenance of your HyperX Savage DDR4 memory modules. The HyperX Savage DDR4 memory is designed to complement Intel's 2, 4, 6, or 8 core processors, offering enhanced performance for tasks such as video editing, 3D rendering, gaming, and AI processing. These modules feature speeds up to 3000MHz and latencies of CL15, optimized for Intel's 100 series chipset and X99 chipset motherboards, supporting easy overclocking via XMP profiles.

Слика: напред view of the HyperX Savage DDR4 memory module, showcasing its black heat spreader with the HyperX logo and Savage DDR4 branding.

Содржина на пакетот

Потврдете дека вашиот пакет ги содржи следниве ставки:

• 2 x HyperX Savage DDR4 Memory Modules (8GB each, 16GB Kit)

Поставување и инсталација

Before installing the memory modules, ensure your system is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

1. Подготовка

1. Проверка на компатибилност: Confirm that your motherboard supports DDR4 DIMM memory modules and the specified speed (3000MHz). Refer to your motherboard's manual for details.
2. Исклучено: Исклучете го компјутерот целосно и исклучете го кабелот за напојување.
3. Отворен случај: Open your computer's side panel to access the motherboard.

2. Инсталација на модул

1. Locate DIMM Slots: Identify the DDR4 DIMM slots on your motherboard. Consult your motherboard manual for the correct slot configuration for dual-channel memory.
2. Open Clips: Gently push down the retention clips at both ends of the DIMM slot.
3. Модул за усогласување: Hold the memory module by its edges, avoiding contact with the gold pins. Align the notch on the module with the key in the DIMM slot.
4. Вметни модул: Apply even pressure to both ends of the module until it seats firmly into the slot and the retention clips snap into place. Do not force the module.
5. Повторете: Install the second memory module into the corresponding slot as indicated by your motherboard manual.

Слика: Под агол view of the HyperX Savage DDR4 memory module, showing the heat spreader design and the gold contact pins.

3. Пост-инсталација

1. Затвори случај: Повторно прикачете го страничниот панел на куќиштето на компјутерот.
2. Повторно поврзете го напојувањето: Plug the power cable back into your computer and power it on.

Упатства за работа

After physical installation, it is important to configure your system's BIOS/UEFI to utilize the full potential of your HyperX Savage DDR4 memory modules.

Enabling XMP Profile

HyperX Savage DDR4 memory modules come with built-in Intel XMP (Extreme Memory Profile) проfileс. Овие проfiles are optimized for Intel 100 series chipsets and X99 motherboards, allowing for easy overclocking without manual timing adjustments.

1. Пристап до BIOS/UEFI: During system startup, repeatedly press the designated key (commonly ДЕЛ, F2, F10, или F12) to enter your motherboard's BIOS or UEFI settings. The specific key varies by motherboard manufacturer.
2. Locate XMP Setting: Navigate to the memory or overclocking section within the BIOS/UEFI. Look for an option related to 'XMP', 'DOCP', 'A-XMP', or 'Memory Profile'.
3. Enable Profile: Select the XMP profile (usually 'Profile 1' or 'Enabled') to automatically configure the memory to its rated speed (3000MHz) and timings (CL15) at 1.35V.
4. Зачувај и излези: Save the changes and exit the BIOS/UEFI. Your system will restart with the new memory settings applied.

If your system does not support XMP, the memory will operate at a default JEDEC speed, typically 2133MHz or 2400MHz, depending on your motherboard and CPU.

Одржување

HyperX Savage DDR4 memory modules are designed for durability and reliability. Minimal maintenance is required to ensure optimal performance and longevity.

• Одржувајте чисто: Periodically clean the interior of your computer case to prevent dust buildup on the memory modules and other components. Use compressed air to gently remove dust.
• Правилно ракување: When handling memory modules, always hold them by the edges to avoid touching the gold contacts or the integrated circuits.
• Контрола на температурата: Ensure adequate airflow within your computer case to maintain optimal operating temperatures for all components, including memory.

Решавање проблеми

If you encounter issues after installing your HyperX Savage DDR4 memory, consider the following troubleshooting steps:

• Системот не се стартува:
  • Ensure the memory modules are fully seated in their slots and the retention clips are locked.
  • Verify that your motherboard supports the installed memory type and speed.
  • Try booting with only one module installed to identify a potentially faulty module.
• Incorrect Speed Detected:
  • Access your BIOS/UEFI settings and ensure the XMP profile е овозможено.
  • Update your motherboard's BIOS/UEFI to the latest version, as this can improve memory compatibility and stability.
• Нестабилност на системот или падови:
  • Стартувајте алатка за дијагностика на меморијата (на пр., Windows Memory Diagnostic или MemTest86) за да проверите за грешки.
  • Осигурајте се дека вашиот уред за напојување (PSU) обезбедува доволно и стабилно напојување на сите компоненти.
  • Check for proper cooling within your system to prevent overheating.

Спецификации

Гаранција и поддршка

HyperX Savage DDR4 memory modules are backed by a lifetime warranty, ensuring long-term reliability and peace of mind. Free technical support is also available to assist with any questions or issues you may encounter.

For warranty claims or technical assistance, please visit the official HyperX support webстраницата или контактирајте ја нивната служба за корисници. Зачувајте го доказот за купување за потврда на гаранцијата.

HyperX Support: www.hyperx.com/support