YATO YT-2381 Pressure Regulator with Manometer

1. Вовед

Thank you for choosing the YATO YT-2381 Pressure Regulator with Manometer. This device is designed to precisely control and maintain the output pressure of compressed air systems. Please read this manual carefully before installation and operation to ensure safe and efficient use of the product. Keep this manual for future reference.

Image 1.1: YATO YT-2381 Pressure Regulator with Manometer. This image shows the overall appearance of the pressure regulator, including the main body and the attached manometer for pressure readings.

2. Инструкции за безбедност

Секогаш почитувајте ги следниве безбедносни мерки за да спречите повреди и оштетување на опремата:

• Ensure the compressed air system is depressurized before installing or removing the regulator.
• Wear appropriate personal protective equipment (PPE), such as safety glasses, when working with compressed air.
• Do not exceed the maximum operating pressure specified for the regulator.
• Inspect the regulator and all connections for damage or leaks before each use.
• Use only clean, dry compressed air. Contaminants can damage the regulator.
• Do not modify the regulator in any way. Use only original replacement parts if repairs are necessary.
• Држете ги децата и неовластен персонал подалеку од работната површина.

3. Содржина на пакетот

По распакувањето, проверете дали сите предмети се присутни и неоштетени:

• YATO YT-2381 Pressure Regulator
• Manometer (pre-installed or separate)
• Упатство за употреба (овој документ)

4. Производот завршиview

The YATO YT-2381 is a robust pressure regulator designed for industrial and workshop applications. It features a durable construction and an integrated manometer for precise pressure monitoring.

Клучни компоненти:

• Влезна порта: Connects to the compressed air source.
• Излезен приклучок: Connects to the air tool or system requiring regulated pressure.
• Копче за прилагодување: Used to set the desired output pressure.
• Манометар: Displays the current output pressure.

5. Поставување и инсталација

Follow these steps for proper installation of your pressure regulator:

1. Систем за намалување на притисокот: Ensure the compressed air system is completely depressurized and shut off before beginning installation.
2. Идентификувајте ги портите: Locate the inlet and outlet ports on the regulator. The inlet port typically has an arrow indicating the direction of airflow.
3. Поврзете го влезот: Connect the compressed air supply line to the regulator's inlet port. Use appropriate thread sealant (e.g., PTFE tape) on all threaded connections to ensure an airtight seal.
4. Поврзете го штекерот: Connect your air tool or system to the regulator's outlet port. Again, use thread sealant.
5. Монтирање (опционално): If desired, the regulator can be mounted to a wall or workbench using suitable brackets (not included) and fasteners. Ensure it is securely fastened.
6. Manometer Installation (if separate): If the manometer is not pre-installed, carefully screw it into the designated port on the regulator. Do not overtighten.
7. Проверете ги врските: Double-check all connections for tightness and proper sealing.

6. Упатства за работа

Once installed, operate the regulator as follows:

1. Open Air Supply: Slowly open the main air supply valve to the system.
2. Прилагодете го притисокот: Turn the adjustment knob on the regulator clockwise to increase the output pressure, and counter-clockwise to decrease it. Observe the manometer to set the desired pressure.
3. Lock Setting (if applicable): Some regulators have a locking mechanism (e.g., push-down knob) to secure the pressure setting. Engage this if available.
4. Притисок на мониторот: Regularly check the manometer during operation to ensure the pressure remains stable.
5. Исклучи: When finished, first close the air supply to the regulator, then depressurize the system by operating the air tool or opening a bleed valve until the manometer reads zero.

7. Одржување

Regular maintenance ensures the longevity and optimal performance of your regulator:

• Дневно: Check for visible leaks around connections and the regulator body.
• Неделно/месечно: Inspect the manometer for accuracy. If it appears faulty, replace it.
• Периодично: If the air supply is not filtered, internal components may become contaminated. Disassemble the regulator (refer to a qualified technician if unsure) and clean internal parts with a suitable solvent. Replace any worn seals or O-rings.
• Складирање: Store the regulator in a clean, dry environment when not in use.

8 Смена на проблеми

9. Спецификации

Technical data for the YATO YT-2381 Pressure Regulator:

• Модел: YT-2381
• Бренд: Јато
• Големина на врската: 1/4 инчи (6.3 мм)
• Максимален работен притисок: 1.2 MPa (approximately 12 bar / 174 PSI)
• Производител: Јато
• Земја на потекло: Кина

Image 9.1: Key specifications of the YATO YT-2381 regulator. This image visually confirms the maximum pressure of 1.2 MPa and the 1/4 inch (6.3mm) connection size.

10. Гаранција и поддршка

YATO products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or contact your local YATO distributor. For technical support or service, please contact the retailer where you purchased the product or visit the official YATO webсајт за детали за контакт.

Ве молиме чувајте го вашиот доказ за купување за барањата за гаранција.