Stayer PLASMA MULTI 40 Inverter Industrial Plasma Cutter User Manual

1. Вовед

The Stayer PLASMA MULTI 40 is an advanced electronic inverter equipment designed for electric arc welding and cutting. This versatile unit offers three primary functions: MMA (Shielded Metal Arc Welding), high-quality TIG welding, and plasma cutting for various metals. Engineered for both light and medium maintenance and construction tasks, it prioritizes maximum quality, ease of use, and reliability.

Key features include intelligent STAYER WELDING control with Hot Start, Arc Force, and Anti Stick for optimized arc ignition and stability, robust construction exceeding European specifications, and high-quality components like 600V IGBT switches. Weighing only 7kg, it is among the lightest in its category, offering maximum power density.

Слика 1: Предна страна view of the Stayer PLASMA MULTI 40 unit.

2. Информации за безбедност

Секогаш давајте приоритет на безбедноста при ракување со опрема за заварување и сечење. Непочитувањето на безбедносните упатства може да резултира со сериозни повреди или смрт.

• Електричен шок: Може да убие. Не допирајте ги електричните делови под напон. Носете суви, изолациски ракавици и заштитна облека. Уверете се дека обработуваниот дел е правилно заземјен.
• Пареи и гасови: Може да биде опасно по вашето здравје. Држете ја главата подалеку од пареите. Користете вентилација или издувен систем за да ги отстраните пареите од зоната за дишење.
• Лачни зраци: Can burn eyes and skin. Wear a welding helmet with a proper shade filter. Wear appropriate eye protection with side shields. Wear protective clothing to cover exposed skin.
• Пожар и експлозија: Welding and cutting can cause fire or explosion. Keep flammable materials away from the work area. Have a fire extinguisher readily available.
• Жешки делови: Може да предизвика тешки изгореници. Оставете опремата да се олади пред да ја допрете.
• Бучава: Прекумерната бучава може да го оштети слухот. Носете заштита за уши.
• Пејсмејкери: Persons with pacemakers should consult their doctor before operating this equipment.
• Одржување: Исклучете го напојувањето пред сервисирање. Само квалификуван персонал треба да врши поправки.

3. Содржина на пакетот

Upon unpacking, verify that all components are present and undamaged. The standard equipment includes:

• Stayer PLASMA MULTI 40 Inverter Unit
• Плазма факел
• TIG Torch with consumables
• Electrode Holder Cable with Clamp (for MMA welding)
• Кабел за заземјување со Clamp
• Power Cable (2m x 2.5mm²)

Figure 2: Stayer PLASMA MULTI 40 unit with standard accessories.

Figure 3: Plasma Torch.

Figure 4: TIG Torch.

Figure 5: Electrode Holder Cable.

Figure 6: Ground Cable with Clamp.

4. Производот завршиview

The Stayer PLASMA MULTI 40 features a user-friendly control panel and robust connection points for various welding and cutting operations.

Контроли и приклучоци на предниот панел:

• Прекинувач: Го вклучува/исклучува уредот.
• Дигитален екран: Ги прикажува тековните поставки.
• Избор на режим: Allows selection between MMA, TIG, and Plasma modes.
• Копче за прилагодување на струја: Го контролира заварувањето/сечењето ampбес
• Приклучоци за додатоци: Dedicated ports for plasma torch, TIG torch, electrode holder, and ground clamp.

5. Поставување

Before operating the PLASMA MULTI 40, ensure proper setup to guarantee safety and optimal performance.

1. Поставување: Place the unit on a stable, level surface, ensuring adequate ventilation around the machine. Do not block air vents.
2. Поврзување за напојување: Connect the power cable to a suitable 230V power outlet. Ensure the power supply is stable and can handle the unit's requirements (8 KVA generator recommended if not directly from mains). The unit is designed to tolerate overvoltages of +17%.
3. Приклучок за земја: Безбедно прицврстете го заземјувачкиот клинamp to the workpiece or a clean, bare metal part of the work table. A good ground connection is crucial for safety and arc stability.
4. Приклучок за додатоци: Connect the appropriate torch (MMA electrode holder, TIG torch, or Plasma torch) to its designated port on the front panel. Ensure all connections are tight and secure.
5. Gas Connection (for TIG/Plasma): For TIG welding and Plasma cutting, connect the appropriate gas supply (e.g., Argon for TIG, compressed air for Plasma) to the unit's gas inlet. Ensure the gas pressure is set according to the specific process requirements.

6. Операција

The Stayer PLASMA MULTI 40 offers three distinct operating modes: MMA, TIG, and Plasma Cutting.

6.1. General Operating Principles

• Вклучете го уредот користејќи го прекинувачот за напојување.
• Select the desired operating mode (MMA, TIG, or Plasma) using the mode selector.
• Adjust the current (amperage) using the adjustment knob according to the material thickness and process.
• Ensure proper personal protective equipment is worn at all times.

6.2. MMA Welding (Shielded Metal Arc Welding)

This mode is suitable for welding with coated electrodes, including cellulosic types. The intelligent STAYER WELDING control enhances performance:

• Топол почеток: Provides an initial boost of current to ensure easy arc ignition.
• Сила на лак: Automatically increases current when the arc length shortens, preventing the electrode from sticking and improving arc stability.
• Anti Stick: Reduces the current to a minimum if the electrode sticks to the workpiece, allowing for easy removal without damaging the electrode or workpiece.

Connect the electrode holder cable and ground clamp. Insert the appropriate electrode into the holder. Set the current based on electrode diameter and material. Initiate the arc by striking the electrode against the workpiece.

6.3. TIG Welding (Tungsten Inert Gas Welding)

The PLASMA MULTI 40 provides high-quality TIG welding with high-frequency (HF) arc ignition, eliminating the need for scratch starting and reducing tungsten contamination.

Connect the TIG torch and ground clamp. Ensure the inert gas (e.g., Argon) supply is connected and flowing. Install a suitable tungsten electrode in the torch. Select TIG mode and adjust the current. Use the torch trigger to initiate the HF arc and begin welding.

6.4. Plasma Cutting

This mode allows for cutting all types of metals with non-contact HF ignition, providing clean and precise cuts up to 12mm thickness.

Connect the plasma torch and ground clamp. Ensure the compressed air supply is connected and flowing at the correct pressure. Select Plasma mode and adjust the cutting current. Position the torch nozzle close to the workpiece without touching (non-contact HF ignition) and press the trigger to initiate the plasma arc and begin cutting.

7. Одржување

Regular maintenance ensures the longevity and optimal performance of your PLASMA MULTI 40 unit.

• Чистење: Periodically clean the exterior of the unit with a dry, soft cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the unit is disconnected from power before cleaning.
• Инспекција на кабел: Regularly inspect all cables (power, welding, ground, torch) for cuts, cracks, or damaged insulation. Replace any damaged cables immediately.
• Потрошен материјал за факел: For plasma and TIG torches, regularly check and replace worn consumables (nozzles, electrodes, diffusers, collets) to maintain cutting/welding quality.
• Врски: Ensure all electrical and gas connections remain tight and free of corrosion.
• Складирање: Чувајте го уредот во чиста и сува средина кога не е во употреба.

8 Смена на проблеми

This section addresses common issues you might encounter with your PLASMA MULTI 40.

9. Спецификации

Technical specifications for the Stayer PLASMA MULTI 40:

10. Гаранција и поддршка

For warranty information, technical support, or service inquiries, please refer to the official Stayer website or contact your authorized Stayer dealer. Keep your purchase receipt as proof of purchase for any warranty claims.

За дополнителна помош, можете да ја посетите Stayer Store on Amazon.