Производот завршиview
The Zooz ZAC99 is a momentary push-button in-wall switch designed for various applications requiring temporary contact closure. It is suitable for controlling devices such as garbage disposals or as an accessory switch for Z-Wave dimmer modules to enable local dimming control. This device is not a Z-Wave switch itself but functions as a momentary contact switch.
Клучни карактеристики:
- Разновидна апликација: Can be used for garbage disposals or as a local control for Z-Wave dimmer modules.
- Momentary Control: Activates a connected device only while the button is pressed.
- Флексибилна инсталација: Compatible with 14 AWG and 12 AWG wires, supporting loads up to 15 A.
- Компактен дизајн: Тенок проfile allows for easier installation in standard switch boxes.

Слика: напред view of the Zooz ZAC99 Momentary Push-Button in-Wall Switch. This image shows the white paddle-style button and the mounting frame.
Информации за безбедност
- ПРЕДУПРЕДУВАЊЕ: Risk of Electric Shock. All service should be performed by qualified personnel only.
- Disconnect power at the circuit breaker or fuse box before installation.
- Осигурајте се дека сите жичени врски се безбедни и се во согласност со локалните електрични кодови.
- Овој уред е наменет само за внатрешна употреба.
- Не го надминувајте максималното оптоварување од 15 Amps.
Инсталација (Поставување)
Follow these steps for safe and proper installation of your Zooz ZAC99 Momentary Push-Button in-Wall Switch.
- Исклучете го напојувањето: Locate the circuit breaker controlling the switch location and turn off the power. Verify power is off using a voltagд тестер.
- Отстранете го постоечкиот прекинувач: Внимателно отстранете ја ѕидната плоча и одвртете го постоечкиот прекинувач од електричната кутија. Исклучете ги жиците од стариот прекинувач.
- Идентификувајте ги жиците:
- Линиска (жешка) жица: Типично црна, носи струја од прекинувачот.
- Вчитај жица: Typically black, connects to the light fixture or appliance.
- Заземјување: Bare copper or green, connects to the electrical box or ground screw.
- Wire the ZAC99 Switch:

Слика: Назад view of the Zooz ZAC99 switch, illustrating the screw terminals for wiring connections.
- Connect the Line (Hot) wire to one of the screw terminals on the ZAC99 switch.
- Connect the Load wire to the other screw terminal on the ZAC99 switch.
- Connect the Ground wire to the green ground screw on the switch or the electrical box.
- Ensure all connections are tight and secure. The switch accepts 14 AWG and 12 AWG wires.
- Монтирајте го прекинувачот: Внимателно притиснете го жичниот прекинувач во електричната кутија. Прицврстете го со приложените завртки.
- Инсталирајте ѕидна плоча: Attach the wall plate over the switch.
- Вратете ја моќноста: Вклучете го напојувањето повторно кај прекинувачот.
Забелешка: This switch is a momentary contact switch. It does not have a neutral wire connection and is designed for simple on/off momentary control. For advanced functionality with Z-Wave dimmer modules, refer to the specific instructions for your Z-Wave device regarding momentary switch configuration.
Упатства за работа
The Zooz ZAC99 switch provides momentary control based on its application.
For Garbage Disposals or Similar Devices:
- Активирање: Press and hold the upper part of the paddle switch. The connected device (e.g., garbage disposal) will remain active as long as the button is held.
- За деактивирање: Release the button. The device will turn off.
When Used with a Z-Wave Dimmer Module (Accessory Control):
When configured with a compatible Z-Wave dimmer module (e.g., Aeotec ZW111, Fibaro FGD-212, Qubino ZMNHDD3, ZMNHWD3), the ZAC99 can provide local control for lighting.
- Вклучи/исклучи: Tap the upper part of the paddle switch once to toggle the light on or off.
- Прилагодете ја осветленоста: Press and hold the upper part of the paddle switch to adjust the brightness. Release when the desired brightness level is reached.
Важно: The Z-Wave dimmer module must be configured to recognize a momentary switch for this functionality. Refer to your Z-Wave dimmer module's instruction manual for specific configuration settings (e.g., parameter settings for momentary switch type).
Одржување
The Zooz ZAC99 switch requires minimal maintenance.
- Чистење: За да го исчистите прекинувачот, избришете го со мека, дamp крпа. Не користете абразивни средства за чистење или растворувачи. Пред чистење, проверете дали е исклучено напојувањето.
- Периодични проверки: Periodically check the wall plate and switch for any signs of damage or loose connections. If any issues are observed, turn off power and consult a qualified electrician.
Решавање проблеми
If you experience issues with your ZAC99 switch, refer to the following common solutions:
- Уредот не реагира:
- Ensure power is supplied to the switch at the circuit breaker.
- Проверете дали сите жичени врски се безбедни и точни.
- Check the connected load (e.g., garbage disposal) to ensure it is functioning correctly.
- Not Controlling Z-Wave Dimmer Module:
- Confirm that the Z-Wave dimmer module is properly installed and powered.
- Ensure the Z-Wave dimmer module is configured to operate with a momentary switch. This usually involves adjusting a parameter in your Z-Wave hub or controller settings. Refer to the dimmer module's manual for specific instructions (e.g., Zooz Zen72, Option 19, set to Momentary switch).
- Verify the wiring between the ZAC99 and the Z-Wave dimmer module is correct according to the dimmer module's accessory switch wiring diagram.
- Switch Feels Stiff or Hard to Press:
- The switch is designed for a tactile click. If it feels unusually stiff or unresponsive, ensure it is properly seated in the electrical box and not obstructed by the wall plate.
Спецификации
| Број на модел: | ZAC99 |
| Моќност: | 120 VAC, 60 Hz |
| Максимално оптоварување: | 15 Amps (1800 вати) |
| Работна температура: | 32-104° F (0-40° C) |
| Димензии: | 4” x 1.5” x 1.4” |
| Инсталација и употреба: | Само во затворен простор |
| Режим на работа: | Manual, Momentary |
| Тип на контакт: | Нормално отворено |
| Тип на конектор: | Терминали за завртки |
| Тип на коло: | 1-насочен |
| Тип на монтирање: | Монтирање на ѕид |
| Материјал: | Plastic (Housing), Copper (Contacts) |
| Compatible Devices (Z-Wave Dimmer Modules): | Aeotec By Aeon Labs Z-Wave Plus Nano Dimmer ZW111, Fibaro Z-Wave Plus Dimmer 2 FGD-212, Qubino Z-Wave Plus Flush Dimmer ZMNHDD3, Qubino Z-Wave Plus Flush RGBW Dimmer Module ZMNHWD3 |
Гаранција и поддршка
For warranty information or technical support, please contact Zooz directly. Refer to the official Zooz website or your purchase documentation for the most current support contact details and warranty terms.
Бренд: ЗООЗ
Производител: ЗООЗ
Webсајт: Visit the ZOOZ Store on Amazon