Audison AP BMW S8-2 Prima Series Subwoofer User Manual

1. Вовед и повеќеview

The Audison AP BMW S8-2 Prima Series Subwoofer is an 8-inch (200mm) component designed for direct replacement in BMW vehicles. This subwoofer features a 2 Ohm impedance and is engineered to maximize performance within the factory under-seat enclosures. Its design focuses on delivering powerful and clear low frequencies, enhancing the in-car audio experience.

Key features include a Neodymium magnet for high power and control, a 38mm voice coil wound on an aluminum support for efficient heat dissipation, and an ABS plastic basket reinforced with fiberglass for minimal installation depth. This manual provides essential information for the proper installation, operation, and maintenance of your Audison AP BMW S8-2 subwoofer.

Слика 1.1: Предна страна view of the Audison AP BMW S8-2 Prima Series Subwoofer. This image displays the subwoofer's top surface with the Audison logo and model number visible.

2. Информации за безбедност

Please read all safety instructions before installing or operating this product. Failure to follow these instructions may result in injury or damage to the product or vehicle.

• Се препорачува професионална инсталација: Due to the complexity of car audio systems and vehicle electrical systems, professional installation by a qualified technician is highly recommended.
• Исклучете ја батеријата: Always disconnect the vehicle's negative battery terminal before beginning any installation work to prevent electrical shorts and damage.
• Жици: Уверете се дека сите кабли се правилно поставени и обезбедени за да спречите приклештување, триење или краток спој. Користете жици со соодветен калибар за поврзување на напојувањето и звучниците.
• Избегнувајте вода и влага: Do not expose the subwoofer to water or excessive moisture. This product is not waterproof.
• Вентилација: Ensure adequate ventilation around the subwoofer and any associated ampлајфикатори за да се спречи прегревање.
• Нивоа на гласност: Продолженото изложување на високи нивоа на јачина на звук може да предизвика оштетување на слухот. Прилагодете ја јачината на звукот на удобно ниво.

3. Содржина на пакетот

Проверете дали сите елементи се присутни во пакувањето пред да продолжите со инсталацијата.

• 1x Audison AP BMW S8-2 Subwoofer
• 2x 5mm Polyurethane Gaskets

Слика 3.1: The two 5mm polyurethane gaskets included with the subwoofer. These gaskets are crucial for proper fitment and vibration decoupling.

4. Поставување и инсталација

The Audison AP BMW S8-2 subwoofer is specifically designed for direct replacement of OEM speakers located under the front seats of compatible BMW vehicles. Its shallow design ensures compatibility with the existing factory enclosure.

4.1. Проверки пред инсталацијата

• Осигурајте се дека батеријата на возилото е исклучена.
• Confirm the subwoofer's impedance (2 Ohm) is compatible with your ampпоставување залажувач.
• Gather all necessary tools for removing vehicle trim and existing speakers.

4.2. Чекори за инсталација

1. Carefully remove the vehicle's front seats and access the factory subwoofer enclosures. Refer to your vehicle's service manual for specific instructions on seat and trim removal.
2. Remove the existing OEM subwoofers from their enclosures.
3. Place the two 5mm polyurethane gaskets onto the Audison AP BMW S8-2 subwoofer. These gaskets ensure a tight seal and decouple the subwoofer from vibrations within the enclosure.
4. Install the Audison AP BMW S8-2 subwoofer into the factory enclosure. The ABS plastic basket and front magnet design facilitate a minimal installation depth.
5. Поврзете ги каблите на сабвуферот со вашиот amplifier. Ensure correct polarity. The 2 Ohm impedance of the S8-2 allows for maximum power output when used with compatible multi-amplified systems, such as the Audison AP 8.9 bit.
6. Secure the subwoofer firmly within the enclosure.
7. Reinstall vehicle trim and seats.
8. Повторно поврзете ја батеријата на возилото.

Слика 4.1: Страна проfile of the Audison AP BMW S8-2 subwoofer, illustrating its shallow mounting depth. This design is optimized for BMW under-seat installations.

5. Операција

Once installed, the Audison AP BMW S8-2 subwoofer integrates with your car audio system to reproduce low-frequency sounds.

• AmpПоставки на лафијаторот: Обезбедете ја вашата amplifier's gain, crossover, and phase settings are properly adjusted for optimal performance with the subwoofer. Incorrect settings can lead to poor sound quality or damage.
• Усогласување на импедансата: The 2 Ohm impedance of the AP BMW S8-2 is designed to draw maximum power from compatible amplifiers, such as the Audison AP 8.9 bit, when configured in a fully active, multi-amplified front system. Consult your amplifier's manual for impedance compatibility.
• Период на пробивање: Allow a break-in period of several hours of normal listening before operating the subwoofer at high volumes. This allows the suspension components to loosen and perform optimally.

6. Одржување

Сабвуферот Audison AP BMW S8-2 бара минимално одржување за да се обезбедат долгорочни перформанси.

• Чистење: Keep the subwoofer free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive cleaners.
• Еколошки услови: Avoid exposing the subwoofer to extreme temperatures or direct sunlight for extended periods.
• Проверки за поврзување: Периодично проверувајте ги сите жичени врски за да се осигурате дека се безбедни и без корозија.

7 Смена на проблеми

If you experience issues with your Audison AP BMW S8-2 subwoofer, refer to the following common troubleshooting steps.

• Нема звук:
  • Проверете ги сите приклучоци за напојување и заземјување на ampживописен.
  • Потврдете дека amplifier is receiving an audio signal from the head unit.
  • Ensure speaker wires are securely connected to both the subwoofer and the amplifier, and that polarity is correct.
  • Проверете amplifier protection modes (e.g., thermal, short circuit).
• Искривен звук:
  • Намалете го amplifier gain. Excessive gain can cause clipping and distortion.
  • Check for loose speaker wires or short circuits.
  • Ensure the subwoofer is not over-driven.
  • Потврдете дека ampПоставките за кросовер на lifier се соодветни за сабвуфер.
• Weak or Lack of Bass:
  • Проверете ampпоставки за засилување на лифидерот и засилување на басот.
  • Verify the phase setting on the amplifier or head unit. Incorrect phase can cancel out bass frequencies.
  • Ensure the subwoofer is properly sealed within its enclosure.
  • Confirm the subwoofer is receiving sufficient power from the ampживописен.

If these steps do not resolve the issue, contact a qualified car audio technician or Audison customer support for further assistance.

8. Спецификации

The following table details the technical specifications for the Audison AP BMW S8-2 Subwoofer.

Слика 8.1: Technical drawing illustrating the dimensions of the Audison AP BMW S8-2 subwoofer. This diagram provides precise measurements for installation planning.

9. Гаранција и поддршка

The Audison AP BMW S8-2 subwoofer comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty documentation included with your product or visit the official Audison webсајт.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Audison customer service or your authorized Audison dealer.