1. Вовед и производview
Thank you for choosing the Stayer Professional Telescopic Miter Saw SCR 315 W. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before initial use and keep it for future reference.
This powerful 1800W miter saw is designed for precision cutting with a large capacity, capable of cutting materials up to 370 mm in length and 120 mm in height. Its belt-driven transmission significantly reduces noise and improves work quality. The robust yet lightweight aluminum base ensures stability and durability.
Слика 1.1: Готовоview of the Stayer Professional Telescopic Miter Saw SCR 315 W.
2. Инструкции за безбедност
Секогаш почитувајте ги основните безбедносни мерки на претпазливост за да го намалите ризикот од пожар, електричен удар и телесни повреди. Чувајте го ова упатство при рака за брза референца.
Општи безбедносни правила:
- Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and a dust mask.
- Осигурајте се дека работната површина е чиста, добро осветлена и без пречки.
- Држете ги децата и случајните минувачи подалеку додека ракувате со пилата.
- Не ракувајте со електричните алати во експлозивни атмосфери, како на пример во присуство на запаливи течности, гасови или прашина.
- Secure the workpiece firmly before cutting. Never hold small pieces by hand.
- Ensure the blade guard is always in place and functioning correctly.
- Исклучете ја пилата од изворот на енергија пред да правите какви било прилагодувања, да менувате додатоци или да вршите одржување.
- Use only sharp, clean blades of the correct size and type for the material being cut.
- Avoid awkward hand positions. Always maintain proper footing and balance.
3. Компоненти и клучни карактеристики
Familiarize yourself with the various parts of your miter saw to ensure safe and effective operation.
Image 3.1: Labeled diagram of the miter saw components.
- Транспортна рачка: For safe and easy carrying of the saw.
- Belt Motor: 1800W motor with belt transmission for quiet and efficient operation.
- Telescopic Rail: Allows for extended cutting capacity up to 370mm.
- Вертикална Clamp: Secures the workpiece for stable cutting.
- Tilting Head: Adjustable from -45° to +45° for bevel cuts in both directions.
- Extendable Support: Provides additional support for longer workpieces.
- Adjustable Rotary Table: Allows for precise miter angle adjustments (0°/22.5°/45°).
- Гумени стапала: Ensures stability and reduces vibration during operation.
- Ласерски водич: Provides a precise cutting line for improved accuracy.
Image 3.2: Additional features and technical data overview.
4. Поставување
Although the saw comes largely pre-assembled, some setup is required before first use.
Отпакување и поставување:
- Внимателно извадете ја пилата и сите додатоци од пакувањето.
- Inspect the saw for any shipping damage. Do not operate if damaged.
- Place the saw on a stable, level workbench or stand that can support its weight (approx. 19 kg) and the workpiece. Ensure sufficient space around the saw for safe operation and material handling.
- Ensure the rubber feet are securely positioned to prevent movement.
Првични прилагодувања:
- Verify that all locking mechanisms for the miter table, bevel head, and telescopic rail are functioning correctly.
- Check the alignment of the blade with the miter scale and laser guide. Adjust if necessary according to the calibration section (if applicable in a detailed manual).
- Connect the saw to a suitable power outlet (220V AC).
Слика 4.1: View of the miter table and fence, ready for setup.
5. Упатства за работа
Follow these steps for safe and effective operation of your miter saw.
Basic Cutting Procedure:
- Подготовка на работното парче: Означете ја посакуваната линија за сечење на материјалот.
- Прилагодете ги поставките: Set the desired miter angle on the rotary table and the bevel angle on the tilting head. Secure all locking levers.
- Позиција на работниот дел: Place the workpiece firmly against the fence and the saw table. Use the vertical clamp to secure it. Ensure the material is fully supported, using the extendable supports if needed.
- Порамнување на сечењето: Lower the saw head slightly (without starting the motor) to align the blade with your marked cut line. Use the laser guide for precise alignment.
- Стартувајте ја пилата: Ensure your hands are clear of the blade path. Press the power switch to start the motor. Allow the blade to reach full speed before beginning the cut.
- Направете рез: Slowly and steadily lower the saw head through the workpiece. For telescopic cuts, push the saw head forward along the rail as you cut.
- Целосно сечење: Откако ќе завршите со сечењето, отпуштете го прекинувачот за вклучување и дозволете сечилото целосно да застане пред да ја кренете главата на пилата.
- Отстранување на работниот дел: Carefully remove the cut material and any off-cuts.
Image 5.1: The miter saw in action, demonstrating a cut.
Слика 5.2: Крупен план view of the cutting process, showing the laser guide.
6. Одржување
Редовното одржување обезбедува долготрајност и оптимални перформанси на вашата аголна пила.
Чистење:
- After each use, disconnect the saw from power and clean off sawdust and debris using a brush or vacuum cleaner.
- Pay special attention to the blade guard, miter scale, and telescopic rails to ensure smooth operation.
- The dust collection system is designed to minimize sawdust, but regular cleaning of the dust bag/port is essential.
Грижа и замена на сечилото:
- Regularly inspect the saw blade for sharpness, cracks, or missing teeth. A dull blade can cause kickback and poor cut quality.
- When replacing the blade, ensure the saw is unplugged. Follow the instructions in your saw's specific blade replacement guide. Use only blades with a 315mm diameter and appropriate arbor size.
Инспекција на ременот:
- Periodically inspect the drive belt for wear, cracks, or slippage. A worn belt can affect performance and increase noise.
- Refer to the service manual for instructions on belt replacement if necessary.
Image 6.1: Close-up of the blade and guard, important for maintenance checks.
7 Смена на проблеми
Овој дел се однесува на вообичаени проблеми со кои може да се соочите со вашата аголна пила.
| Проблем | Можна причина | Решение |
|---|---|---|
| Пила не започнува | Нема струја, неисправен прекинувач, проблем со моторот | Check power connection, circuit breaker. If problem persists, contact service. |
| Лош квалитет на сечење (грубо, кршливо) | Dull blade, incorrect blade for material, improper feed rate, workpiece not secure | Replace or sharpen blade. Use appropriate blade. Adjust feed rate. Secure workpiece firmly. |
| Прекумерни вибрации или бучава | Loose blade, worn belt, damaged bearings, unstable setup | Check blade tightness. Inspect belt for wear. Ensure saw is on a stable surface. If severe, seek professional service. |
| Laser guide not accurate | Misalignment, dirty laser lens | Clean laser lens. Refer to specific instructions for laser calibration (if available). |
| Собирањето прашина е неефикасно | Dust bag full, clogged port, improper connection | Empty dust bag. Clear any clogs in the dust port. Ensure connections are secure. |
| Play/wobble in saw head or table | Loose components, manufacturing defect | Check for any accessible tightening points. If significant play affects accuracy or safety, contact customer support. |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact Stayer customer support.
8. Технички спецификации
Detailed specifications for the Stayer Professional Telescopic Miter Saw SCR 315 W.
| Спецификација | Вредност |
|---|---|
| Број на модел | 1.1933 |
| Производител | СТАЈЕР |
| Извор на енергија | Електричен со кабел |
| Voltage | 220 волти (AC) |
| Моќ | 1800 вати |
| Брзина | 3500 вртежи во минута |
| Материјал за сечилото | Aluminum Oxide (typical for general purpose blades) |
| Специјална карактеристика | Silent (Belt Drive) |
| Тежина на ставката | 19 килограми |
| Димензии на пакетот | 95 x 55 x 55 cm |
| Cutting Capacity (Length) | До 370 мм |
| Капацитет за сечење (висина) | До 120 мм |
9. Гаранција и поддршка
For warranty information, please refer to the warranty card or documentation included with your purchase. Warranty terms and conditions may vary by region and retailer.
If you require technical assistance, spare parts, or have questions regarding the operation or maintenance of your Stayer Professional Telescopic Miter Saw, please contact Stayer customer support or your authorized dealer. Have your model number (1.1933) and purchase details ready when contacting support.