Progress Lighting Eclipse LED Wall Sconce P710090-009-30 Instruction Manual

Производот завршиview

The Progress Lighting Eclipse LED Wall Sconce, model P710090-009-30, is a contemporary lighting fixture designed for both residential and commercial applications. It features a satin white glass shade in a half-moon silhouette, complemented by a beveled brushed nickel metal frame.

Слика: напред view of the Progress Lighting Eclipse LED Wall Sconce, showcasing its brushed nickel finish and satin white glass shade.

Слика: Страничен професионалецfile of the wall sconce, highlighting its half-moon design and depth.

Поставување и инсталација

Важни безбедносни информации: Read all instructions carefully before beginning installation. Turn off electrical power at the main circuit breaker panel before installing or servicing this fixture. Consult a qualified electrician to ensure correct branch circuit connections and compliance with all local electrical codes.

Овај апарат е погоден за damp локации.

Контролна листа на компоненти:

• Fixture Assembly (A)
• Монтажна плоча (Б)
• Outlet Box Screws (C)
• Завртки за монтирање (D)
• Жични навртки (Е)
• Ground Screw (F)
• Glass Shade (G)
• Shade Screws (H)

Чекори за инсталација:

1. Подгответе се за инсталација: Ensure power is off at the circuit breaker. Carefully unpack all components and inspect for any damage.
2. Прикачете ја монтажната плоча: Secure the mounting plate (B) to the electrical outlet box using the provided outlet box screws (C).
3. Приклучоци за жици:
   • Connect the white wire from the fixture to the white (marked or ribbed) supply wire using a wire nut (E).
   • Connect the black wire from the fixture to the black (or smooth) supply wire using a wire nut (E).
   • Connect the bare copper or green ground wire from the fixture to the green ground screw (F) on the mounting plate, then to the bare copper or green supply ground wire.
4. Прицврстувач за монтирање: Carefully align the fixture assembly (A) with the mounting plate and secure it using the mounting screws (D).
5. Инсталирајте стаклена сенка: Place the glass shade (G) onto the fixture and secure it with the shade screws (H).

Image: Detailed diagram illustrating the assembly steps and wiring connections for the wall sconce. Refer to this diagram for visual guidance during installation.

Слика: Заден дел view of the sconce, showing the integrated LED module and mounting points before installation.

Image: Close-up of the integrated LED light source, which is designed for long-term performance and energy efficiency.

Упатства за работа

This LED wall sconce is designed for simple operation. Once properly installed and wired to a standard wall switch, the fixture can be turned on and off using that switch. The integrated LED light source provides consistent illumination without the need for bulb replacement.

Одржување

To maintain the appearance and performance of your Progress Lighting Eclipse LED Wall Sconce, follow these guidelines:

• Чистење: Turn off power to the fixture before cleaning. Wipe the metal frame with a soft, dry cloth. For the glass shade, use a soft cloth dampened with a mild, non-abrasive glass cleaner. Avoid harsh chemicals or abrasive materials that could damage the finish or glass.
• LED модул: The LED module is integrated and does not require user maintenance or replacement. Do not attempt to disassemble the LED component.
• Инспекција: Периодично проверувајте ги сите врски и монтажниот хардвер за да се осигурате дека се безбедни.

Решавање проблеми

If your wall sconce is not functioning as expected, consider the following common issues and solutions:

• Светлото не се вклучува:
  • Осигурајте се дека ѕидниот прекинувач е во положба „ВКЛУЧЕНО“.
  • Check the circuit breaker to confirm power is supplied to the fixture.
  • Verify all wiring connections are secure and correctly made according to the installation instructions. If unsure, consult a qualified electrician.
• Light flickers or dims:
  • Ensure the fixture is not connected to an incompatible dimmer switch. This fixture is designed for 120V operation and may not be compatible with all dimmer types.
  • Проверете дали има лабави врски со жици.

If these steps do not resolve the issue, contact customer service for further assistance.

Спецификации

Image: Technical line drawing displaying the width (15.5 inches), height (7.5 inches), and depth (4 inches) of the wall sconce.

Image: Official product specification sheet providing detailed technical data and dimensions for the P710090-009-30 model.

Информации за гаранцијата

This Progress Lighting product is covered by a 5-годишна Ограничена гаранција. This warranty guarantees your satisfaction with the purchase and includes professional after-sales customer service support. For specific terms and conditions, please refer to the warranty documentation included with your product or contact customer service.

Поддршка за корисници

For any questions, technical assistance, or warranty claims, please contact Progress Lighting customer service:

• Телефон: 1-800-447-1723
• Webсајт: Visit the official Progress Lighting webстраница за дополнителни ресурси и опции за контакт.