TOPENS KD702 Automatic Light-Duty Dual Swing Gate Opener Instruction Manual

1. Информации за безбедност

Внимателно прочитајте ги сите упатства пред инсталација и употреба. Непочитувањето на овие упатства може да резултира со сериозни повреди или оштетување на имотот. Зачувајте го ова упатство за во иднина.

Детекција на опструкција: The system is equipped with integrated stop and reverse functions in case of obstruction. Ensure the path of the gate is clear before operation.
Photocell Beam System: An infrared photocell beam system is included for enhanced safety. Install and align it correctly to prevent the gate from closing on obstacles.
Светло кое трепка: A flashing light is provided to indicate gate movement, increasing awareness for pedestrians and vehicles.
Рачно издавање: In case of power failure or remote control loss, use the manual release key to operate the gate manually. Keep the key accessible but secure.
Деца и домашни миленици: Keep children and pets away from the gate area during operation. Do not allow children to play with the gate controls.
Професионална инсталација: While designed for DIY installation, if you are unsure about any steps, consult a qualified professional.

2. Производот завршиview

The TOPENS KD702 is an automatic light-duty dual swing gate opener designed for residential and light commercial applications. It features two 24V DC motors and is suitable for gates up to 3.6 meters (12 feet) long or 140 kg (300 lbs) per gate leaf. The system offers reliable performance with advanced safety features and flexible power options.

Клучни карактеристики:

Издржлива конструкција: Extendable aluminum swing arms ensure superior performance and longevity.
Флексибилна инсталација: Supports both pull-to-open (inward swing) and push-to-open (outward swing) configurations.
Повеќе режими на напојување: Operates directly on 230V AC. Can be supplemented with a 24V backup battery and/or solar panel (not included) for enhanced reliability.
Напредна безбедност: Features electromagnetism limit switches, soft start/soft stop, obstruction detection with auto-reverse, infrared photocell beam, and a flashing warning light.
Прилагодливи поставки: Customizable auto-close time (0-99s) and holding force.
Широка компатибилност: Works with various gate materials including steel, wood, vinyl, panel, tube, and chain link.

Diagram illustrating TOPENS KD702 features including self-closing, soft start/stop, obstacle adjusting, security code, and gate swing options. — This diagram highlights the key features of the TOPENS KD702, such as self-closing settings, soft start and stop functionality, obstacle adjustment, advanced security coding, and the two available gate swing installation modes (pull-to-open and push-to-open).

Внатрешна view of the TOPENS KD702 motor with callouts for key components like the electromagnetism limit switch, smart chip, manual release key, extension cable, and features like waterproof design, operating temperature, and quiet operation. — Внатрешна view of the KD702 motor, detailing its robust components. It shows the reliable electromagnetism limit switch for easy adjustment, a smart chip for ultimate safety protection, and a manual release key for power outages. The image also points out the 7.5m extension 5 conductor cable for easy actuator arm connection, and highlights features like waterproof design, a wide working temperature range (-20°C to +50°C), and quiet operation (less than 50dB).

3. Содржина на пакетот

The TOPENS KD702 kit includes all necessary components for installation and operation. Please check the package carefully upon receipt to ensure all items are present.

2 x Gate Opener Actuators (Motors)
1 x Контролна кутија
2 x Remote Controls (M12)
1 x Infrared Photocell Beam System (TC102)
1 x Flashing Warning Light (JD24VY)
Mounting Hardware (brackets, bolts, screws, etc.)
Клучеви за рачно ослободување
Упатство за употреба

4. Поставување и инсталација

The TOPENS KD702 is designed for straightforward installation. Follow these steps carefully. No welding is required, and common tools are sufficient.

4.1 Контролна листа пред инсталација:

Ensure your gate is in good working condition, swinging freely without binding.
Verify gate dimensions and weight are within the KD702's capacity (max 3.6m / 140kg per leaf).
Gather necessary tools (e.g., drill, wrenches, measuring tape, level).
Plan the wiring path for AC power and accessories.

4.2 Mounting the Actuators:

The KD702 supports two installation modes: pull-to-open (gate swings inwards) and push-to-open (gate swings outwards). Choose the appropriate mode for your gate.

Detailed installation diagram for TOPENS KD702 showing gate capacity, pull-to-open and push-to-open configurations, and wiring for power modes. — This comprehensive diagram illustrates the gate capacity for each arm of the KD702, along with detailed schematics for both pull-to-open (inward swing) and push-to-open (outward swing) installation modes. It also shows the wiring for Power Mode 1 (AC only) and Power Mode 2 (AC with backup batteries), and the connection points for various optional accessories like the photocell, warning light, and external receiver.

Refer to the detailed diagrams in the manual for precise mounting point measurements (A, B, C dimensions) to ensure optimal gate travel and performance. Securely attach the mounting brackets to the gate post and gate frame, then connect the actuators.

4.3 Wiring the Control Box:

Connect the actuator motors, AC power, and safety accessories (photocell, flashing light) to the control board inside the control box. Ensure all connections are secure and follow the wiring diagram provided in the full manual.

Diagram showing three supported power modes for the TOPENS KD702: AC electricity only, AC with backup batteries, and AC with solar panels and backup batteries. — This diagram illustrates the three supported power modes for the KD702: Power Mode 1 uses AC electricity only; Power Mode 2 uses AC electricity with two 12V automobile backup batteries (not included); and Power Mode 3 uses AC electricity, solar panels, and backup batteries (solar panel and charge controller not included).

4.4 Limit Switch Adjustment:

Adjust the electromagnetism limit switches on each actuator to define the open and closed positions of your gate. This is crucial for proper operation and preventing over-travel.

4.5 Изборни додатоци:

The KD702 is compatible with a range of TOPENS accessories to enhance functionality and convenience, such as wireless keypads (TKP3), external receivers (ERM12), and vehicle sensors (TEW3).

Grid of compatible TOPENS accessories including remote controls, keypads, sensors, and warning lights. — A selection of compatible TOPENS accessories available for the KD702, including various remote controls (M12), wireless and wired keypads (TC188, TC175P, TKP3), external receivers (ERM12), push buttons (TC148), vehicle sensors (TEW3), electric gate locks (ET24), reflection photocell sensors (TRF3), and warning lights (JD24VY).

5. Упатства за работа

Once installed and configured, operating your TOPENS KD702 gate opener is simple.

5.1 Ракување со далечинско управување:

Press the designated button on your M12 remote control to open or close the gate. A single press will initiate the gate movement. If the gate is already moving, a press will stop it. Another press will reverse its direction.

Person in a car using a remote control to open a dual swing gate, with text 'ENJOY YOUR SWING GATE OPENER'. — This image shows a user conveniently opening their swing gate with a remote control from inside their vehicle. The gate opener is designed for light-duty swing gates and is solar capable (solar panel not included).

5.2 Automatic Closing Function:

The KD702 features an adjustable auto-close timer (0-99 seconds). After the gate fully opens, it will automatically close after the set delay. This feature can be enabled or disabled and adjusted via the control board settings.

5.3 Soft Start and Soft Stop:

The gate opener is designed with soft start and soft stop functionality, ensuring smooth and quiet operation, which extends the lifespan of the motor and gate hardware.

5.4 Manual Release:

Во случај на моќ outage or if the remote control is lost, insert the manual release key into the actuator's lock cylinder and turn it to disengage the motor. This allows you to open or close the gate by hand.

6. Одржување

The TOPENS KD702 is designed for minimal maintenance. Regular checks will ensure optimal performance and longevity.

Месечно: Inspect the gate and hinges for any signs of wear or damage. Ensure the gate moves freely without obstruction when manually operated.
Квартално: Check all mounting hardware for tightness. Verify that the photocell beams are clean and properly aligned. Test the obstruction detection feature by placing a soft object in the gate's path.
Годишно: Lubricate any moving parts of the gate (hinges, pivots) as recommended by your gate manufacturer. Inspect wiring for any signs of damage or fraying.
Проверка на батеријата (доколку е применливо): If using backup batteries, check their charge level and condition periodically.

7 Смена на проблеми

Refer to this section for common issues and their solutions. For more complex problems, contact TOPENS customer support.

Проблем	Можна причина	Решение
Портата не реагира на далечинскиот управувач.	Dead remote battery, remote not programmed, power issue to opener.	Replace remote battery. Reprogram remote. Check power supply to control box.
Портата се отвора, но не се затвора.	Photocell beam obstructed or misaligned, auto-close disabled.	Clear obstruction from photocell path. Clean and realign photocells. Enable auto-close function in control board settings.
Портата неочекувано запира или се враќа наназад.	Obstruction detected, limit switch misadjusted.	Remove any obstructions. Check and readjust limit switches for open/closed positions.
Портата работи бавно или со тешкотии.	Low power, gate hinges stiff, motor issue.	Check power supply. Lubricate gate hinges. Contact support if motor issue is suspected.
Трепкачкото светло не работи.	Loose connection, faulty bulb/LED.	Check wiring connections to the control box. Replace flashing light if necessary.

8. Спецификации

Спецификација	Детал
Модел	KD702
Производител	Hangzhou Sanyuan Tools Co.,Ltd
Max. Gate Length (per leaf)	3.6 метри (12 стапки)
Max. Gate Weight (per leaf)	140 кг (300 фунти)
Мотор волtage	24V DC
Напојување	230V AC (main), 24V Battery / Solar (optional backup)
Димензии на производот (Д x Ш x В)	85.5 x 8.4 x 10.4 cm
Тежина на производот	16.5 килограми
Вклучени батерии	6 CR2 (for remotes/accessories)
Состав на батерија	Литиум метал
Работна температура	-20°C до +50°C
Ниво на бучава	Помалку од 50 dB

9. Гаранција и поддршка

TOPENS is committed to providing excellent customer service and support for your KD702 gate opener.

Гаранција: The TOPENS KD702 comes with a 12-month warranty from the date of purchase.
Техничка поддршка: Enjoy lifetime technical support. For any installation or operational questions, please contact TOPENS customer service.
Враќања и замени: TOPENS offers a free 30-day product return and exchange service.
Контакт: For comprehensive system solutions and support, visit the official TOPENS website to contact customer service.