Ferrex GT-BWC-01

Ferrex GT-BWC-01 Irrigation Computer

Упатство за употреба

Вовед

Thank you for choosing the Ferrex GT-BWC-01 Irrigation Computer. This device is designed to automate your garden watering, ensuring efficient and precise irrigation. It features adjustable watering intervals, a rain sensor, and is suitable for common tap connections. Please read this manual carefully before installation and operation to ensure proper use and longevity of the product.

Инструкции за безбедност

  • Овој уред е наменет само за надворешна употреба.
  • Ensure the tap connection is secure to prevent leaks.
  • Do not immerse the device in water. It is splash-proof (IPX4), but not waterproof.
  • Use only the specified battery type (2 x 1.5V AA). Do not mix old and new batteries or different battery types.
  • Да се ​​чува подалеку од дофат на деца.
  • Не обидувајте се сами да го расклопите или поправите уредот. Контактирајте квалификуван персонал за сервис.
  • Protect the device from frost during winter months by disconnecting it from the tap and storing it indoors.

Содржина на пакетот

Проверете дали сите артикли се присутни во пакетот:

  • Ferrex GT-BWC-01 Irrigation Computer
  • Rain Sensor with approximately 5m cable
  • System adapter (1/2")
  • Adapter with 26.5 mm (G3/4") thread
  • Упатство за употреба

Карактеристики на производот

  • Compatible with common taps with 33.3 mm (G1") thread. Includes adapters for 26.5 mm (G3/4") and 1/2" connections.
  • Adjustable for up to 4 separate irrigation intervals per day.
  • Freely selectable irrigation days.
  • Manual water extraction function with a single button press.
  • Splash-proof housing (IPX4) for outdoor durability.
  • Adjustable irrigation time from approximately 1 to 240 minutes.
  • Wired rain sensor (approx. 5m cable) to interrupt watering during rainfall.
  • Работа волtage: 3V (2 x 1.5V AA batteries).
  • Operating pressure: Maximum 6 bar.

Поставување и инсталација

1. Инсталација на батерија

  1. Open the battery compartment on the back of the irrigation computer.
  2. Вметнете две батерии од 1.5 V AA, внимавајќи на точниот поларитет (+/-).
  3. Close the battery compartment securely to maintain splash protection.

2. Connecting to the Tap

  1. Ensure your tap has a G1" (33.3 mm) thread. If not, use the provided G3/4" (26.5 mm) or 1/2" adapter.
  2. Screw the irrigation computer firmly onto the tap. Hand-tighten only; do not overtighten.
  3. Connect your garden hose or irrigation system to the outlet of the irrigation computer.

3. Connecting the Rain Sensor

  1. Plug the rain sensor cable into the designated port on the side of the irrigation computer.
  2. Place the rain sensor in an open area where it can accurately detect rainfall, away from direct spray from sprinklers.
  3. The rain sensor will automatically interrupt watering cycles when sufficient rain is detected.
Ferrex GT-BWC-01 Irrigation Computer and Rain Sensor

Image: The Ferrex GT-BWC-01 Irrigation Computer connected to a tap, with the rain sensor positioned nearby. The display shows various settings.

Упатства за работа

The irrigation computer features an LCD display and several buttons for navigation and setting adjustments.

Прикажи готовоview (Refer to product image for visual reference)

  • Uhrzeit (Time): Го прикажува тековното време.
  • Неделиtag Bewässerungstag (Weekday Irrigation Day): Shows current day and selected irrigation days (SU MO TU WE TH FR SA).
  • Zyklus (Cycle): Indicates the current watering cycle (1, 2, 3, 4).
  • Startzeit (Start Time): Displays the programmed start time for a cycle.
  • Zeitdauer (Duration): Shows the programmed watering duration in minutes.
  • Sparfunktion (Special Function): Displays settings for water-saving features (e.g., WATER 4 MIN PAUSE 2 MIN).
  • Programmwahl (Program Selection): Indicates the current program mode (e.g., AUTO).

Функции на копчињата

  • Добро копче: Ги потврдува изборите и преминува на следното поставување.
  • Копчиња за нагоре/надолу (+/-): Adjust values or navigate through options.
  • Manual Watering Button (Tap icon): Initiates or stops manual watering.

Programming the Irrigation Computer

Follow these steps to program your desired watering schedule:

  1. Поставете тековно време: Press the OK button until 'Uhrzeit' (Time) is highlighted. Use the +/- buttons to set the current hour and minute, then press OK to confirm.
  2. Set Current Day and Irrigation Days: Navigate to 'Wochentag Bewässerungstag'. Use +/- to select the current day. Then, select the days you wish to water. Press OK to confirm each selection.
  3. Select Watering Cycle: Go to 'Zyklus'. You can program up to 4 independent watering cycles (1, 2, 3, 4). Select a cycle to program.
  4. Поставете време за почеток: For the selected cycle, navigate to 'Startzeit'. Use +/- to set the desired start time for watering. Press OK.
  5. Поставете времетраење на наводнување: Navigate to 'Zeitdauer'. Use +/- to set the watering duration from 1 to 240 minutes. Press OK.
  6. Configure Special Function (Sparfunktion): If available, adjust water-saving settings. For example, 'WATER 4 MIN PAUSE 2 MIN' might mean 4 minutes of watering followed by a 2-minute pause, repeated.
  7. Select Program Mode: Ensure 'Programmwahl' is set to 'AUTO' for automatic operation based on your programmed schedule.

Рачно наводнување

To manually water, press the button with the tap icon. Press it again to stop manual watering. This function does not affect the programmed schedule.

Одржување

  • Замена на батерија: Replace batteries when the low battery indicator appears on the display or if the device stops functioning. Always replace both batteries simultaneously.
  • Чистење: Исчистете ја надворешноста на уредот со рекламаamp cloth. Do not use abrasive cleaners or solvents. Ensure the rain sensor is free of debris for accurate operation.
  • Зимско складирање: Before the first frost, disconnect the irrigation computer from the tap, remove the batteries, and store the unit and rain sensor in a dry, frost-free location.

Решавање проблеми

ПроблемМожна причинаРешение
Уредот не се вклучува.Батериите се празни или неправилно вметнати.Заменете ги батериите, осигурувајќи се дека е точен поларитетот.
Нема проток на вода.Tap is closed; low water pressure; program not set; rain sensor active.Open the tap fully; check water supply; ensure program is active (AUTO); check rain sensor for accumulated water.
Water leaks from connection.Connection not tight enough; missing or damaged washer.Ensure connection is hand-tight; check and replace washer if necessary.
Rain sensor not working.Sensor port dirty; sensor placed incorrectly; cable damaged.Clean sensor and port; reposition sensor; check cable for damage.

Спецификации

  • Модел: GT-BWC-01
  • Оперативен волtage: 3 V (2 x 1.5 V AA batteries)
  • Тековна потрошувачка: 300 mA
  • Работен притисок: Макс. 6 бари
  • Tap Connection: G1" (33.3 mm) with G3/4" (26.5 mm) and 1/2" adapters
  • Време на наводнување: Прибл. 1-240 минути
  • Интервали на наводнување: До 4 на ден
  • Класа на заштита: IPX4 (отпорен на прскање)
  • Rain Sensor Cable Length: Прибл. 5 м
  • Материјал: Пластика
  • Тип на приказ: LCD екран
  • Димензии (пакет): 19.99 x 16 x 11 cm
  • Тежина (пакет): 712 гр

Гаранција и поддршка

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or contact your retailer. For technical support or inquiries, please contact Ferrex customer service through the contact information provided with your purchase documentation.