DENON DP-2500 Analog Record Player Instruction Manual

1. Вовед

This manual provides essential information for the proper setup, operation, and maintenance of your DENON DP-2500 Analog Record Player. Please read these instructions thoroughly before using the unit to ensure optimal performance and longevity. The DP-2500 features a high-precision quartz lock direct drive system and a dynamic damping tonearm for superior audio reproduction.

2. Инструкции за безбедност

• Напојување: Ensure the unit is connected to an AC 100V, 50/60Hz power source. Using an incorrect power supply can damage the unit and pose a safety risk.
• Поставување: Place the record player on a stable, level surface away from direct sunlight, heat sources, moisture, and excessive vibrations.
• Вентилација: Не ги блокирајте отворите за вентилација. Оставете доволно простор околу уредот за правилен проток на воздух.
• Liquid and Foreign Objects: Do not expose the unit to liquids. Avoid inserting foreign objects into any openings. If liquid or an object enters the unit, immediately disconnect the power and contact qualified service personnel.
• Чистење: Always disconnect the power cord before cleaning. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Сервисирање: Не обидувајте се сами да го сервисирате уредот. Сите сервиси обратете се на квалификуван сервисер.

3. Поставување

3.1 Отпакување и поставување

Carefully remove the record player and all accessories from the packaging. Place the unit on a sturdy, level surface to prevent vibrations from affecting playback quality. Ensure there is enough space around the unit for the dust cover to open fully.

3.2 Инсталација на плато

1. Gently place the turntable platter onto the spindle.
2. Place the felt mat or rubber mat on top of the platter.

3.3 Инсталација на капак за прашина

Attach the dust cover hinges to the designated slots on the rear of the record player cabinet. Carefully lower the dust cover onto the hinges.

3.4 Балансирање на тонералата и прилагодување на силата на следење

1. Ensure the cartridge is securely mounted to the headshell.
2. Lower the tonearm lifter. Release the tonearm clamp.
3. Rotate the counterweight at the rear of the tonearm until the tonearm is perfectly balanced (floating horizontally).
4. Once balanced, hold the counterweight steady and rotate only the tracking force ring until '0' aligns with the center line on the tonearm.
5. Rotate the entire counterweight (including the ring) to set the recommended tracking force for your cartridge (e.g., 1.5g to 2.0g). Refer to your cartridge's specifications.

3.5 Anti-Skating Adjustment

Set the anti-skating dial to match the tracking force you have set. This compensates for the inward force on the stylus as the record plays.

3.6 Аудио врски

1. Connect the RCA audio cables from the record player's output to the 'PHONO' input on your ampзајакнувач или примач.
2. Connect the ground wire from the record player to the 'GND' terminal on your amplifier or receiver. This helps reduce hum.

3.7 Поврзување за напојување

Plug the power cord into an appropriate AC 100V wall outlet.

This image shows the DENON DP-2500 Analog Record Player from two angles. The top view displays the turntable with its clear dust cover closed, highlighting the platter and tonearm assembly. The bottom view shows the rear of the unit, revealing the power cord and connection ports, also with the dust cover closed.

4. Упатства за работа

4.1 Вклучување/исклучување

Locate the power switch, typically on the front or side of the unit. Flip the switch to the 'ON' position to power on the record player. Flip it to 'OFF' when not in use.

4.2 Избор на брзина

The DP-2500 supports two playback speeds: 33 1/3 RPM and 45 RPM. Use the speed selector switch (usually labeled '33' and '45') to choose the appropriate speed for your record.

4.3 Свирење на плоча

1. Ставете плоча на послужавникот, осигурувајќи се дека е центрирана.
2. Select the correct playback speed (33 1/3 or 45 RPM).
3. Gently lift the tonearm using the tonearm lifter lever.
4. Carefully position the tonearm over the desired starting groove of the record.
5. Slowly lower the tonearm lifter lever to gently place the stylus onto the record. Playback will begin.

4.4 Запирање на репродукцијата

1. At the end of a record side, or when you wish to stop playback, raise the tonearm using the tonearm lifter lever.
2. Gently return the tonearm to its rest and secure it with the tonearm clamp.
3. Remove the record from the platter.

5. Одржување

5.1 Чистење на единицата

Regularly dust the record player with a soft, dry, lint-free cloth. For stubborn marks on the cabinet or dust cover, slightly dampen the cloth with water and wipe gently, then dry immediately. Avoid using chemical cleaners.

5.2 Stylus Cleaning

A dirty stylus can degrade sound quality and damage your records. Use a dedicated stylus cleaning brush or fluid (following the cleaner's instructions) to gently clean the stylus. Always brush from back to front.

5.3 Грижа за капакот од прашина

The dust cover protects your record player. Clean it regularly to maintain clarity. Avoid placing heavy objects on it to prevent scratches or damage.

6 Смена на проблеми

• Без моќност: Check if the power cord is securely plugged into both the unit and the wall outlet. Ensure the power switch is in the 'ON' position.
• Без звук или низок тон: Verify that the RCA cables are correctly connected to the 'PHONO' input on your ampосигурувач. Осигурајте се дека вашиот amplifier is set to the 'PHONO' input and the volume is turned up. Check if the stylus is properly seated in the cartridge.
• Звук на зуење: Ensure the ground wire is securely connected between the record player and your amplifier. Check for proper shielding of audio cables.
• Искривен звук: Check the stylus for dirt or damage. Verify that the tracking force and anti-skating settings are correct for your cartridge. Ensure the record is clean.
• Неточна брзина: Confirm that the speed selector switch is set to the correct RPM (33 1/3 or 45) for the record being played.

7. Спецификации

7.1 Phono Motor Unit (DP-2000)

• Вози Метод: Директно возење
• Мотор: AC серво мотор
• Контрола на брзина: High-precision magnetic recording playback method with crystal oscillator-based frequency detection speed servo and phase servo
• Брзини на ротација: 33 1/3 вртежи во минута, 45 вртежи во минута
• Време на започнување: Within 1.5 seconds (at 33 1/3 rpm)
• Леле и треперат: Less than 0.015% w.r.m.s (new measurement method)
• Сооднос S/N: 75dB or more (DIN-B)
• Тркалезна плоча: 300mm Aluminum Die-cast, 1.2kg (Inertia mass 160kg-cm2)
• Rotation Speed Deviation: Во рок од 0.002%
• Load Characteristics: 0% (100g needle pressure at outermost circumference)
• Кочница: DC Brake method (within 3 seconds)
• Напојување: AC 100V, 50/60Hz
• Потрошувачка на енергија: 12 W
• Тежина: 7 кг

7.2 Tonearm Unit

• Тип: Static Balance type Dynamic DampМеханизам за вчитување
• Ефективна должина: 244 мм
• Надминување: 14 мм
• Офсет агол: 20.5°
• Грешка при следење: 2.5° (максимум)
• Compatible Cartridge Weight: Од 5 до 11 гр
• Stylus Pressure Variable Range: 0g to 2.5g / revolution (0.1g per mark)
• Head Shell Weight: 8.5g (excluding mounting screws and nuts)
• Arm Height Adjustment Range: 41.5mm to 47mm (from arm board surface to pipe center)
• Head Shell Connector: EIA standard 4p connector
• Излезен кабел: Low capacitance cord with 5p connector, approx. 1.2m
• Arm Lifter: Масло Дamped type

7.3 Општо

• Кабинет: Plywood with Vinyl Sheet
• Димензии (Ш x В x Д): 485mm x 175mm x 405mm (when dust cover is closed)
• Вкупна тежина: 11.7 кг

8. Гаранција и поддршка

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized DENON dealer. Keep your purchase receipt as proof of purchase.