1. Вовед
This manual provides essential information for the safe and efficient use of your EMITEVER 24V Power Supply. Please read this manual thoroughly before installation and operation, and retain it for future reference.
1.1 Содржина на пакетот
- 1 x 60W DC Power Supply
1.2 Производ надview
The EMITEVER 24V Power Supply is a UL-Listed 60W LED power adapter designed to convert 100-240V AC input to a stable 24V DC output at 2.5A. It is suitable for various low-voltage applications, including LED strip lights, CCTV cameras, and other 24V devices requiring up to 60 watts of power.
Image 1.1: The EMITEVER 24V 60W LED Power Adapter, including the main unit, AC power cord, and a DC connector adapter.
2. Информации за безбедност
2.1 Важни безбедносни инструкции
- Ensure your device operates at 24V and requires under 60W to prevent damage, flickering, or overheating.
- This power supply does not have charging or dimming functions. For dimming, use an external PWM controller at the DC end.
- The product has an IP30 rating, making it suitable for dry indoor environments only. Avoid exposure to moisture or water.
- Не го отворајте напојувањето casing. Внатре нема делови што може да ги сервисира корисникот.
- Да се чува подалеку од дофат на деца.
- Исклучете го напојувањето пред да правите какви било поврзувања или исклучување.
2.2 UL Certified Protection
This 24V Power Adapter is cUL Listed, indicating compliance with rigorous safety standards. It incorporates comprehensive protection mechanisms to ensure device safety and longevity:
- Заштита од прекумерна струја: Спречува оштетување од прекумерно влечење на струја.
- Заштита од краток спој: Автоматски го исклучува напојувањето во случај на краток спој.
- Заштита од прегревање: Prevents the adapter from reaching unsafe temperatures.
Image 2.1: Internal component comparison illustrating the quality and safety features, including UL certification, of the EMITEVER power supply.
3. Спецификации
| Карактеристика | Детал |
|---|---|
| Влез волуменtage | 100-240V AC |
| Влезна фреквенција | 50/60 Hz |
| Излез Voltage | 24V DC (Constant Voltage) |
| Максимална излезна струја | 2.5 Amps |
| Максимална излезна моќност | 60 вати |
| DC Jack Size | 5.5 x 2.1mm (Inner Positive, Outer Negative) |
| Оценка за IP | IP30 (само за внатрешна употреба) |
| Димензии на производот | 4.7"Д x 2.1"Ш x 1.2"В (11.9 см x 5.3 см x 3.0 см) |
| Тежина | 10.55 унци (приближно 300 г) |
| Извор на енергија | Електричен со кабел |
| Тип на монтирање | Wall Mount (via AC plug) |
| Сертификати | CUL Наведено |
Image 3.1: Physical dimensions and cable lengths of the EMITEVER 24V 60W power supply.
4. Поставување и инсталација
4.1 Пред инсталација
- Verify that your device requires a 24V DC power input.
- Потврдете дека вкупната количинаtage required by your connected devices does not exceed 60W.
- Ensure the installation environment is dry and free from moisture.
4.2 Методи за поврзување
The EMITEVER 24V Power Supply offers two primary methods for connecting to your devices:
- Direct DC Jack Connection:
Connect the power supply's DC output plug (5.5 x 2.1mm) directly into a compatible DC input jack on your device. This is a plug-and-play method requiring no additional wiring. - Поврзување со терминален блок:
For devices that require bare wire connections, use the included DC connector to terminal block adapter. Loosen the screws on the terminal block, insert the positive and negative wires from your device, and then tighten the screws. Ensure correct polarity (Inner Positive, Outer Negative for the DC jack).
Image 4.1: Visual guide to the two available connection methods for the power supply.
Слика 4.2: Детално view of the 5.5 x 2.1mm DC output size and polarity.
4.3 Компатибилност
This power supply is compatible with a wide range of 24V DC devices that require up to 60 watts of power, including but not limited to:
- EMITEVER LED strip lights, modules, light bars, and cabinet lights
- Пејзажно осветлување
- Безжични рутери
- Small 3D printers
- Безбедносни камери
- Other 24V devices under 60 watts
5. Упатства за работа
After ensuring all connections are secure and correct, plug the AC power cord into a standard 100-240V wall outlet. The power supply will begin to deliver 24V DC power to the connected device. A green indicator light on the adapter will illuminate when power is active.
The start-up time for the power supply can take 1-3 seconds to stabilize the output and extend its operational life. No further user interaction is required for basic operation.
Image 5.1: The power supply in operation, providing stable power to an LED strip light.
6. Одржување
- Чистење: Disconnect the power supply from the wall outlet and all connected devices before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or sprays.
- Складирање: Store the power supply in a cool, dry place away from direct sunlight and moisture when not in use.
- Инспекција: Periodically inspect the power cords and the adapter casing for any signs of damage. If damage is found, discontinue use and replace the unit.
7 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Device not lighting up / No power | Неточен томtage (not 24V) Уред ватtage exceeds 60W Лабава врска Неисправен штекер Неуспех на напојувањето | Verify device voltagе и ватtagбарања. Проверете дали сите врски се безбедни. Тестирајте го ѕидниот штекер со друг уред. Replace the power supply if it's faulty. |
| Треперење светла | Уред ватtage exceeds 60W Лабава врска Некомпатибилен уред | Обезбедете вкупна ватиtage е под 60W. Проверете ги врските. Confirm device compatibility with a 24V constant voltagд снабдување. |
| Power supply is hot | Overload (device wattagе премногу висока) Лоша вентилација | Reduce load to under 60W. Ensure adequate airflow around the power supply. If overheating persists, discontinue use. |
| Green indicator light not on | Нема влезно напојување со наизменична струја Внатрешна грешка | Check AC power cord connection and wall outlet. If power is present at the outlet, the power supply may be faulty and require replacement. |
8. Гаранција и поддршка
EMITEVER provides a 3-годишна услуга без грижи for this product. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
For warranty claims or technical support, please contact EMITEVER customer service through the retailer where the product was purchased or visit the official EMITEVER webсајт за информации за контакт.