ABB AD1NO-R-15m Modular Device Switch User Manual

1. Вовед

The ABB AD1NO-R-15m is an analog time switch designed for daily scheduling with a 15-minute switching interval. This modular device features one normally open (NO) channel and includes a power reserve function to maintain timekeeping during power outages. It is suitable for various electrical scheduling applications.

Слика 1: Предна страна view of the ABB AD1NO-R-15m Modular Device Switch, highlighting its compact design and control interface.

2. Важни безбедносни инструкции

Please read and understand all safety instructions before installing, operating, or maintaining this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Инсталацијата и одржувањето мора да ги врши само квалификуван персонал.
• Disconnect power before installation, maintenance, or servicing to prevent electric shock.
• Ensure all wiring complies with local and national electrical codes and regulations.
• Не го користете уредот ако изгледа оштетен.
• Овој уред е дизајниран за внатрешна употреба во суви средини.

3. Производот завршиview

The AD1NO-R-15m is an analog time switch with the following key features:

• Аналогно бирач: For setting daily schedules.
• 15-Minute Switching: Allows precise control over connected circuits with 15-minute intervals.
• 1 Normally Open (NO) Channel: Контролира едно електрично коло.
• Резерва на енергија: Maintains timekeeping for a specified duration during power interruptions.
• Модуларен дизајн: Suitable for integration into standard electrical panels on a DIN rail.

Note: The power reserve ensures the timer continues to function accurately even if the main power supply is temporarily lost.

4. Поставување и инсталација

Follow these steps for proper installation of the AD1NO-R-15m Modular Device Switch:

1. Исклучување на струја: Before beginning, ensure the main power supply to the installation area is completely disconnected at the circuit breaker or fuse box. Verify with a voltagд тестер.
2. Монтирање: Mount the AD1NO-R-15m switch onto a standard DIN rail within an appropriate electrical enclosure. Ensure it is securely fastened.
3. Жици:
   • Connect the incoming phase (L) and neutral (N) wires to the designated input terminals of the time switch.
   • Connect the load wire from the output terminal of the time switch to the device you wish to control.
   • Ensure all connections are tight and secure. Refer to the wiring diagram printed on the device for specific terminal identification.
4. Враќање на енергија: Once all connections are verified and secure, close the electrical enclosure and restore power to the circuit.

Always consult a qualified electrician for installation if you are unsure or lack experience with electrical wiring.

5. Упатства за работа

To set the time and program the switching schedule:

1. Поставете тековно време: Rotate the analog dial clockwise until the current time aligns precisely with the reference arrow or marker on the device's face.
2. Program Switching Times: The dial features small segments around its perimeter. Push in the segments corresponding to the times you want the connected circuit to be ON. Pull out segments for OFF periods. Each segment typically represents a 15-minute interval.
3. Operating Mode (if applicable): If your model includes a manual override switch (e.g., ON, AUTO, OFF), ensure it is set to "AUTO" for programmed operation.

The internal power reserve will automatically charge when the device is powered, ensuring continued accurate timekeeping during short power outagес.

6. Одржување

The AD1NO-R-15m is designed for minimal maintenance. Follow these guidelines to ensure optimal performance:

• Чистење: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners, abrasive materials, or solvents.
• Инспекција: Periodically inspect the wiring connections for tightness and any signs of wear, corrosion, or damage. Ensure all terminals are secure.
• Еколошки услови: Осигурајте се дека работната средина останува во рамките на наведените опсези на температура и влажност за да спречите оштетување.

There are no user-serviceable parts inside this device. Do not attempt to open the casing, as this will void the warranty and may expose you to electrical hazards.

7 Смена на проблеми

If you encounter issues with your AD1NO-R-15m switch, refer to the table below for common problems and solutions:

If the problem persists after attempting these solutions, please contact ABB customer support for further assistance.

8. Технички спецификации

• Модел: AD1NO-R-15m
• Број на дел: 2CSM222461R1000
• Производител: АББ
• Тип: Аналоген прекинувач за време
• Switching Interval: 15 минути
• Канали: 1 Нормално отворен (НЕ)
• Резерва на енергија: Да
• Тежина на ставката: Приближно 2.82 унци (80 грама)
• Димензии на производот: Приближно 3.54 x 0.69 x 2.6 инчи (90 x 17.5 x 66 mm)
• Тип на монтирање: DIN Rail (Wall Mount)
• Вклучени компоненти: Modular device switch
• Потребни батерии: No (features internal power reserve)
• ASIN: B09BP4PFMF
• Прв достапен: 21 декември 2024 година

Забелешка: Спецификациите се предмет на промена без претходна најава.

9. Гаранција и поддршка

Информации за гаранцијата

For detailed warranty terms and conditions, please refer to the official ABB warranty statement provided with your purchase or visit the official ABB webстраница. Зачувајте го доказот за купување за гаранциски побарувања.

Поддршка за корисници

For technical assistance, troubleshooting, or service inquiries, please contact ABB customer support through their official webстраницата или информациите за контакт наведени во пакувањето на вашиот производ.

Службеник на АББ Webсајт: www.abb.com