WORKPRO Cordless 3.6V Grass Shears and Hedge Trimmer

Вовед

Ви благодарам за купувањетоasing the WORKPRO Cordless 3.6V Grass Shears and Hedge Trimmer. This versatile 2-in-1 tool is designed to simplify your garden maintenance tasks, offering both grass shearing and hedge trimming capabilities in a compact, lightweight, and cordless design. Please read this manual carefully before operation to ensure safe and efficient use of the product.

For optimal performance and longevity, adhere to all instructions regarding setup, operation, maintenance, and safety.

Информации за безбедност

ПРЕДУПРЕДУВАЊЕ: Always wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and sturdy footwear when operating this tool. Keep hands and feet away from blades. Do not operate in wet conditions or near flammable liquids or gases.

• Држете ги децата и случајните минувачи подалеку додека ракувате со алатката.
• Ensure the safety lock key is properly inserted before operation.
• Do not force the tool. Use the correct blade for the task.
• Disconnect the tool from the power source before cleaning, maintenance, or changing accessories.
• Чувајте го алатот на суво, безбедно место, подалеку од дофат на деца.

Производот завршиview и Компоненти

Familiarize yourself with the components of your WORKPRO Grass Shears and Hedge Trimmer:

Слика 1: Компоненти на производот

• Рачка: Ергономски дизајниран за удобен зафат.
• Безбедносно копче: Must be pressed simultaneously with the switch to operate.
• Префрли: Activates the blades.
• Копче за ослободување на сечилото: Used to detach blades for changing.
• 180° Rotation Button: Allows the handle to rotate for different cutting angles.
• Safety Lock Key: Must be inserted into the handle end for operation.
• Сечило за стрижење трева: 80mm cutting width, ideal for lawn edges and small grass areas.
• Hedge Trimmer Blade: 120mm cutting width, suitable for hedges and shrubs.
• Микро USB кабел: For charging the tool's battery.

Setup and Blade Installation

Before first use, ensure the battery is fully charged (refer to the Charging section). Follow these steps to install the desired blade:

Figure 2: Setup Steps

1. Прикачете го сечилото: Align the chosen blade (grass shear or hedge trimmer) with the main unit and press firmly until it clicks into place. Ensure it is securely fastened.
2. Insert Safety Lock Key: Insert the safety lock key into the designated slot at the end of the handle. The tool will not operate without this key.

Упатства за работа

To operate your WORKPRO tool, follow these steps:

1. Activate Safety Button: With the safety lock key inserted, press and hold the safety button located on the side of the handle.
2. Прекинувач за вклучување: While holding the safety button, press the main power switch (trigger) to start the blades.
3. Континуирано работење: Once the blades are running, you can release the safety button, and the tool will continue to operate as long as the main switch is pressed.
4. Adjust Handle Angle (Hedge Trimmer): For hedge trimming, you can rotate the handle 180 degrees by pressing the 180° rotation button and adjusting the handle to your desired angle. This allows for comfortable cutting in various positions.

Figure 3: Grass Shearing in Use

Figure 4: Hedge Trimming and Handle Rotation

Video: WORKPRO Grass Shears and Hedge Trimmer in Action

This video demonstrates the operation of the WORKPRO Grass Shears and Hedge Trimmer, including blade changes, safety features, and practical use for both grass and hedge trimming.

Полнење на батеријата

The WORKPRO tool is powered by a 3.6V rechargeable Lithium-ion battery. It features a battery level indicator lamp to show the remaining charge.

Figure 5: Charging and Power Indicator

• Индикатор за полнење: Црвеното светло покажува дека батеријата се полни. Зеленото светло покажува дека батеријата е целосно наполнета.
• Connecting for Charge: Use the provided Micro USB cable. Connect it to the tool's charging port and plug the other end into a commercially available USB adapter (DC5V 0.5~1.0A output is recommended).
• Време на полнење: Approximately 1.5 to 3.5 hours for a full charge.
• Важна забелешка: Ensure your USB adapter provides at least 5V/1A output. Insufficient output may prevent proper charging or trigger overvoltage protection, stopping the charging process.

Одржување

Редовното одржување обезбедува долготрајност и оптимални перформанси на вашиот алат.

• Чистење на сечилото: After each use, remove the blades and clean off any grass, leaves, or debris. Use a brush or cloth.
• Подмачкување на сечилото: Periodically apply a light machine oil to the blades to prevent rust and ensure smooth operation.
• Складирање: Store the tool and blades in a dry, clean place. Ensure blades are clean and dry before storage.
• Нега на батеријата: Do not store the tool with a completely depleted battery. Charge it periodically if not used for extended periods to maintain battery health.

Решавање проблеми

Спецификации

Слика 6: Димензии и спецификации на производот

Гаранција и поддршка

WORKPRO products are manufactured to high-quality standards. For warranty information, technical support, or to purchase replacement parts, please refer to the contact information provided with your product packaging or visit the official WORKPRO webсајт.

Ве молиме чувајте го вашиот доказ за купување за барањата за гаранција.