Betopper 200W COB LED Stage Spotlight (Model LC002-H) Instruction Manual

1. Вовед

This manual provides essential information for the safe and effective operation of your Betopper 200W COB LED Stage Spotlight, Model LC002-H. Please read these instructions thoroughly before installation and use, and retain them for future reference.

Figure 1: Betopper 200W COB LED Stage Spotlight, Model LC002-H

2. Инструкции за безбедност

• Електрична безбедност: Осигурете се дека напојувањето одговара на јачината на звукотtage requirements (AC 100-240V, 50/60Hz). Always disconnect power before cleaning or servicing.
• Вентилација: Do not block ventilation openings. Ensure adequate airflow around the fixture to prevent overheating.
• Температура: Operate the fixture within the specified temperature range (-20°C to 40°C).
• Монтирање: Securely mount the fixture using appropriate hardware. Ensure the mounting surface can support the weight of the fixture.
• Заштита на очите: Избегнувајте директно изложување на очите на изворот на светлина, бидејќи тоа може да предизвика оштетување на очите.
• Изложеност на вода: This fixture is rated IP33. Protect it from water splashes and moisture. Do not use in wet environments.

3. Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

• COB Par Light (x1)
• Рачка (x2)
• Завртка (x2)
• Упатство за употреба (x1)

4. Карактеристики на производот

• 200W COB LED Technology: Utilizes Chip on Board (COB) technology for high-intensity, uniform light output with reduced power consumption.
• Warm & Cold White Output: Provides both 3200K (warm white) and 5600K (cold white) light sources.
• Висок индекс на прикажување на бои (CRI): RA>90 ensures faithful color reproduction, suitable for studios, churches, and theaters.
• Режими на контрола: Supports DMX512, Master-Slave, and Strobe modes.
• Daisy-Chainable Design: Power and XLR cables can be daisy-chained for simplified setup.
• Цврста конструкција: Compact aluminum housing with excellent heat dissipation.
• Adjustable Barndoors: Allows for focused lighting angles (barndoors sold separately).

Figure 2: High CRI for accurate color reproduction

5. Поставување

5.1 Монтирање

The fixture can be used as an uplight on the floor or hung on a truss as a downlight. Use the provided brackets and screws to secure the light. Ensure the mounting location is stable and can support the fixture's weight.

Figure 3: Mounting bracket for flexible positioning

5.2 Врски

The rear panel of the fixture features power input/output and DMX IN/OUT ports. These allow for daisy-chaining multiple units.

Figure 4: Rear panel with power and DMX connections

Поврзување за напојување:

Connect the power cable to the 'POWER IN' port. For multiple units, use the 'POWER OUT' port to daisy-chain power to the next fixture.

DMX поврзување:

Connect a DMX cable from your DMX controller to the 'DMX IN' port. To control multiple fixtures, connect a DMX cable from the 'DMX OUT' of the first fixture to the 'DMX IN' of the next, and so on.

6. Операција

6.1 Контролен панел

The fixture features a digital display and control buttons (MENU, UP, DOWN, ENTER) on the rear panel for mode selection and parameter adjustment.

6.2 Работни режими

The Betopper 200W COB LED Stage Spotlight supports various operating modes:

• Топло бело: Produces a warm, yellowish light (3200K).
• Ладно бело: Produces a bright, bluish-white light (5600K).
• Строб: Creates a flashing light effect.
• DMX512: Allows external control via a DMX controller for precise light adjustments.
• Господар-роб: One fixture acts as a master, controlling other connected slave fixtures.

Figure 5: Warm and Cold White light output

Figure 6: Combined Warm and Cold White light output

6.3 Видео демонстрација

Video 1: This video demonstrates the various light modes (warm white, cold white, strobe) and DMX control capabilities of the Betopper 200W COB LED Stage Spotlight. It shows how to connect multiple units via DMX and adjust settings using a DMX controller.

7. Одржување

Редовното одржување обезбедува оптимални перформанси и долготрајност на вашиот уред.

• Чистење: Periodically clean the lens and exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Вентилација: Ensure the cooling fan and vents are free from dust and debris. The built-in cooling fan helps maintain optimal operating temperature.
• Инспекција на кабел: Regularly check power and DMX cables for any signs of damage.

Figure 7: Internal cooling fan for efficient heat dissipation

8 Смена на проблеми

• Без моќност: Check the power cable connection and ensure the power outlet is functional. Verify the fixture's power switch is on.
• Нема излез на светлина: Confirm the correct operating mode is selected. If using DMX, ensure the DMX address is set correctly and the controller is sending signals.
• Проблеми со контролата на DMX: Check DMX cable connections. Ensure DMX addresses are unique for each fixture and that the DMX chain is properly terminated if necessary.
• Прегревање: Ensure ventilation openings are not blocked. Reduce ambient temperature if possible.
• Бучава: The built-in cooling fan produces approximately 54dB of noise. If using in quiet environments (e.g., church, meeting room), confirm this noise level is acceptable.

9. Спецификации

Слика 8: Детални димензии и спецификации на производот

Figure 9: Beam angle and illumination flux diagram

10. Гаранција и поддршка

Betopper provides a 1-year manufacturer's warranty for this product. Additionally, lifetime professional technical support is available. For any inquiries or assistance, please contact Betopper customer service.