WEELMOTION BH-A401 Universal Hoverboard Go-Kart Seat Attachment Instruction Manual

1. Вовед

Thank you for choosing the WEELMOTION BH-A401 Universal Hoverboard Go-Kart Seat Attachment. This manual provides essential information for the safe assembly, operation, and maintenance of your new go-kart attachment. Please read it thoroughly before use and retain it for future reference.

This attachment is designed for universal compatibility, fitting most 6.5-inch, 8-inch, 8.5-inch, and 10-inch hoverboards. Its length is adjustable from 31 to 44 inches, accommodating riders between 100cm and 200cm in height. The maximum load capacity is 100 kg (220 lbs).

2. Информации за безбедност

Вашата безбедност е од најголема важност. Секогаш почитувајте ги следниве безбедносни упатства:

• Секогаш носете соодветна заштитна опрема, вклучувајќи кацига, влошки за колена и влошки за лактите.
• Ensure all screws and connections are securely tightened before each use.
• Не ја надминувајте максималната дозволена тежина од 100 кг (220 фунти).
• Operate the go-kart attachment on smooth, dry, and level surfaces. Avoid uneven terrain, inclines, or wet conditions.
• Children should always be supervised by an adult while using the go-kart attachment.
• Do not operate near traffic, pedestrians, or other hazards.
• Familiarize yourself with the controls before riding at higher speeds.
• Regularly inspect the attachment for any signs of wear, damage, or loose parts.

3. Што има во кутијата

Ве молиме проверете ја содржината на вашиот пакет според листата подолу:

• Седиште
• Left & Right Handle Bars
• Front Pole
• Држач за седиште
• Копче за прилагодување
• 2 Adjustable Brackets
• 2 Adjustable Bracket Screw Sets
• 4 Seat Screw Sets (Washer Screws & Nuts)
• 2 Ален Кис
• Клуч
• 4 Extra Straps

Слика: Надview of the WEELMOTION Hoverboard Go-Kart Seat Attachment and its main components.

4. Инструкции за склопување

Follow these steps to assemble your hoverboard go-kart attachment. An assembly video is provided for visual guidance.

Чекор 1: Собрание на главната рамка

1. Remove the rubber protectors from both sides of the main frame.
2. Insert the front pole into the main frame. Tighten it securely with the adjustment knob.

Image: The adjustable length feature of the go-kart frame, secured by a knob.

Step 2: Adjustable Bracket Assembly

Some go-karts may have the brackets pre-installed. Skip this step if they are already attached to the handle bars.

1. Attach the adjustable bracket to each handle bar using the provided screw sets.
2. You can adjust the bracket position to fit different hoverboard sizes by selecting the appropriate hole.

Step 3: Attach Handle Bars

1. Install both handle bars into the main frame.
2. Tighten them securely using the handle bar screw sets and the provided Allen keys.

Image: Close-up of the comfortable sponge grips on the control handles.

Чекор 4: Собрание на седишта

1. Place the seat onto the seat holder.
2. Fasten the seat to the seat holder using the four seat screw sets (washer screws and nuts).
3. Use the provided wrench to secure the screw nuts from the bottom, ensuring they are fully tightened.

Image: The ergonomic seat design of the go-kart attachment.

Step 5: Attaching to Hoverboard

1. Release the straps from the go-kart attachment.
2. Position the go-kart attachment over your hoverboard.
3. Wrap the straps around your hoverboard and fasten them as tightly as possible to secure the attachment.

Image: The enhanced straps used to securely attach the go-kart to a hoverboard.

5. Упатства за работа

Operating your WEELMOTION go-kart attachment is intuitive:

• Напред: Push both hand control bars down simultaneously.
• Назад: Pull both hand control bars up simultaneously.
• Свртете лево: Push the right hand bar down and pull the left hand bar up.
• Завртете десно: Push the left hand bar down and pull the right hand bar up.
• The 360° flexible PU front wheel allows for smooth and free turning.

Image: Visual guide for controlling the go-kart using the hand bars.

6. Одржување

To ensure the longevity and safe operation of your go-kart attachment:

• Чистење: Избришете ја рамката и седиштето со рекламаamp крпа по употреба. Избегнувајте груби хемикалии.
• Инспекција: Regularly check all bolts, screws, and straps for tightness. Tighten any loose fasteners.
• Складирање: Store the go-kart in a dry, cool place away from direct sunlight and extreme temperatures.
• Замена на ременот: The product includes extra straps. Replace worn or damaged straps immediately to maintain secure attachment to the hoverboard.

7 Смена на проблеми

If you encounter issues with your go-kart attachment, consider the following:

• Приврзаноста се чувствува лабава: Ensure all straps are fastened as tightly as possible and all frame screws are secure.
• Тешкотии при управување: Check that the front PU wheel is clean and free of debris. Ensure the handle bars are properly installed and tightened.
• Невообичаени звуци: Stop using the go-kart immediately and inspect all components for loose parts or damage.

For further assistance, please contact WEELMOTION customer service.

8. Спецификации

9. Гаранција и поддршка

For warranty information, product support, or any questions not covered in this manual, please contact WEELMOTION customer service directly. Refer to the product packaging or the official WEELMOTION webсајт за детали за контакт.