NutriBullet NB50301S

NutriBullet GO Cordless Blender Instruction Manual

Model: NB50301S

Вовед

The NutriBullet GO Cordless Blender is designed for convenience and portability, allowing you to prepare smoothies and protein shakes on the go. This manual provides essential information for safe and effective use of your appliance.

Важни заштитни мерки

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, injury, or property damage.

Што е вклучено

Your NutriBullet GO Cordless Blender package includes:

NutriBullet GO Cordless Blender components including motor base, two cups, two lids, blade cover, and USB charging cord.

Image: All components included with the NutriBullet GO Cordless Blender.

Поставување

Полнење на батеријата

  1. Connect the USB charging cord to the charging port on the motor base.
  2. Plug the other end of the USB cord into a compatible USB power adapter (not included).
  3. The indicator light will illuminate during charging. A full charge provides up to 20 blending cycles.
NutriBullet GO Cordless Blender motor base with a blue indicator light, showing it is powered on or charging.

Image: The motor base of the NutriBullet GO Cordless Blender, illustrating the power button and indicator light.

Собрание

  1. Осигурајте се дека базата на моторот е целосно наполнета.
  2. Fill the 13oz cup with your desired ingredients. Do not exceed the MAX fill line.
  3. Securely twist the blade assembly onto the cup until it is tightly sealed.
  4. Invert the cup and blade assembly, then align it with the motor base. Twist clockwise until it locks into place.

Упатства за работа

Мешање

  1. After assembly, press the power button on the motor base to begin blending.
  2. The blender will run for a preset cycle. For optimal results, blend in short bursts.
  3. Avoid blending continuously for more than 30 seconds to prevent overheating.
  4. If the blender stops, gently shake the unit to redistribute ingredients and restart.
NutriBullet GO Cordless Blender filled with fruits and berries, ready for blending.

Image: The NutriBullet GO Cordless Blender with ingredients inside, demonstrating its use.

По блендирањето

  1. Once blending is complete, twist the cup counter-clockwise to remove it from the motor base.
  2. Carefully unscrew the blade assembly from the cup.
  3. Attach a To-Go Lid for immediate consumption or storage.

Video: A demonstration of how to use the NutriBullet GO Cordless Blender, including assembly and blending.

Одржување и чистење

Cleaning the Blade and Cups

  1. Immediately after each use, rinse the blade assembly and cups with warm water and mild soap.
  2. Use a brush to clean around the blades carefully.
  3. The cups and lids are top-rack dishwasher safe.

Чистење на основата на моторот

  1. Избришете ја основата на моторот со рекламаamp крпа.
  2. Никогаш не ја потопувајте основата на моторот во вода или друга течност.
  3. Уверете се дека приклучокот за полнење е сува пред да се полни.

Решавање проблеми

Блендерот не се вклучува:

Состојките не се мешаат рамномерно:

Indicator light is red:

Спецификации

КарактеристикаСпецификација
Број на моделNB50301S
Моќност на моторот70 W
Капацитет на батеријата2000 mAh
Капацитет на чаша13oz (370 Milliliters)
Материјал за сечилотоНерѓосувачки челик
Бесплатен тип на материјалБесплатно БПА
Извор на енергијаЕлектричен кабел (за полнење)
Тежина на ставката1.87 фунти

Информации за гаранцијата

The NutriBullet GO Cordless Blender comes with a limited warranty. Please refer to the warranty card included in your package or visit the official NutriBullet webстраница за детални услови и одредби. Зачувајте го доказот за купување за гаранциски барања.

Поддршка за корисници

For further assistance, product registration, or to purchase accessories, please visit the official NutriBullet webсајт или контактирајте со службата за корисници.

Службен Webсајт: www.nutribullet.com