Reloop RT-1 BT Turntable User Manual

1. Вовед и повеќеview

The Reloop RT-1 BT is a versatile belt-drive turntable designed for both aspiring DJs and Hi-Fi enthusiasts. It combines classic vinyl playback with modern wireless convenience, featuring integrated Bluetooth for seamless connection to compatible speakers. Its robust construction, including a sturdy chassis and precision-cast platter, ensures stable and distortion-free audio reproduction. The turntable comes equipped with a pre-assembled Ortofon OM Black magnetic pickup system and an integrated phono pre-amplifier, offering flexibility for various audio setups.

2. Инструкции за безбедност

Please read and understand all safety instructions before operating the Reloop RT-1 BT turntable. Retain this manual for future reference.

• Напојување: Користете го само испорачаниот адаптер за напојување. Осигурајте се дека јачината на звукотtage matches your local power supply. Disconnect power during thunderstorms or when unused for extended periods.
• Вода и влага: Do not expose the unit to rain, moisture, or liquids. Avoid placing objects filled with liquids, such as vases, on or near the turntable.
• Вентилација: Ensure adequate ventilation. Do not block ventilation openings. Install the unit according to the manufacturer's instructions.
• Топлина: Не инсталирајте во близина на извори на топлина како што се радијатори, топлински регистри, шпорети или други апарати (вклучувајќи ampлајфикатори) кои произведуваат топлина.
• Чистење: Clean only with a dry cloth. Avoid using liquid or aerosol cleaners.
• Сервисирање: Не обидувајте се сами да го сервисирате овој производ. За сите услуги обратете се кај квалификуван сервисер. Сервисирањето е потребно кога апаратот е оштетен на кој било начин, како на пример кога кабелот за напојување или приклучокот се оштетени, се истурила течност или предмети паднале во апаратот, апаратот бил изложен на дожд или влага, не работи нормално или паднал.
• Поставување: Place the turntable on a stable, level surface to prevent vibrations and ensure proper operation.

3. Содржина на пакетот

Carefully unpack your Reloop RT-1 BT turntable and verify that all the following components are included:

• Reloop RT-1 BT Turntable Unit
• Алуминиумска чинија
• Belt Drive (pre-installed or separate)
• Reloop OM Black Pickup System (by Ortofon, pre-assembled on headshell)
• Школка
• Фелт мат
• Dust Cover (removable acrylic)
• Противтежа
• Аудио кабел (RCA)
• Center Adapter (for 45 RPM records)
• Единица за напојување
• Упатство за употреба

4. Поставување

Follow these steps to set up your Reloop RT-1 BT turntable for the first time.

4.1 Отпакување и поставување

1. Внимателно отстранете ги сите компоненти од пакувањето.
2. Place the turntable unit on a stable, level surface away from direct sunlight, heat sources, and excessive dust.

4.2 Инсталација на плато и ремен

1. Place the aluminum platter onto the spindle of the turntable.
2. If the belt is not pre-installed, carefully loop the drive belt around the motor pulley and the inner rim of the platter.
3. Ставете го филцот на врвот на чинијата.

Image: The Reloop RT-1 BT turntable with its aluminum platter and S-shaped tonearm, highlighting the universal SME connection and cast platter.

4.3 Tonearm and Cartridge Setup

1. The Ortofon OM Black pickup system is pre-assembled on the headshell. Attach the headshell to the tonearm.
2. Install the counterweight onto the rear of the tonearm. Adjust it to balance the tonearm horizontally. Refer to the Ortofon manual for precise tracking force settings (typically 1.5-2.0 grams for OM Black).
3. Прилагодете го бројчаникот против лизгање за да одговара на поставката за силата на следење.

Image: The Reloop RT-1 BT turntable shown with its removable acrylic dust cover and the included Reloop OM Black pickup system by Ortofon.

4.4 Аудио врски

The RT-1 BT features an integrated phono pre-amplifier, allowing you to connect it directly to a line-level input on your amplifier or active speakers. You can also use the PHONO output if your amplifier has a dedicated phono input.

1. Connect the RCA audio cable from the turntable's output to the appropriate input on your ampзајакнувач или звучници со напојување.
2. Select either PHONO or LINE output using the switch on the rear panel, depending on your ampвлез на лифиерот.

Слика: Заден дел view of the Reloop RT-1 BT turntable, illustrating the integrated phono pre-amplifier and its output connections.

4.5 Поврзување за напојување

1. Connect the power supply unit to the DC input on the turntable.
2. Вклучете го адаптерот за напојување во соодветен ѕиден штекер.

5. Упатства за работа

This section details how to operate your Reloop RT-1 BT turntable.

5.1 Свирење на плоча

1. Place a record on the felt mat. For 7-inch records, use the included center adapter.
2. Select the correct speed (33 1/3 RPM for LPs, 45 RPM for singles) using the speed selector switch.
3. Притиснете го копчето СТАРТ/СТОП за да започнете со ротација на чинијата.
4. Gently lift the tonearm using the cueing lever and position the stylus over the desired groove of the record.
5. Lower the cueing lever to slowly drop the stylus onto the record.
6. To stop playback, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the START/STOP button.

Image: Close-up of the Reloop RT-1 BT turntable's controls, featuring the precise pitch adjustment slider (+/-10%) and the two-speed selector (33 1/3 & 45 RPM).

5.2 Прилагодување на висината на тонот

Use the pitch slider to fine-tune the playback speed by +/-10% for precise beat matching or personal preference.

5.3 Bluetooth поврзување

The RT-1 BT allows wireless audio streaming to Bluetooth-enabled speakers or stereo systems.

1. Ensure your Bluetooth speaker or receiver is in pairing mode.
2. Press and hold the Bluetooth pairing button on the RT-1 BT (refer to the diagram in your quick start guide for exact location). The Bluetooth indicator light will flash.
3. Once successfully paired, the indicator light will remain solid. Audio from the turntable will now stream wirelessly to your connected device.

Image: The Reloop RT-1 BT turntable demonstrating smart connectivity, wirelessly streaming audio to two Bluetooth speakers.

6. Одржување

Regular maintenance will help ensure the longevity and optimal performance of your turntable.

• Чистење на единицата: Use a soft, dry, lint-free cloth to wipe the turntable chassis and dust cover. Avoid abrasive cleaners or solvents.
• Грижа за игла: Periodically clean the stylus using a soft brush designed for stylus cleaning, brushing gently from back to front. A dirty stylus can degrade sound quality and damage records.
• Покривка за прашина: Keep the dust cover closed when the turntable is not in use to protect it from dust and debris.
• Инспекција на ременот: Occasionally inspect the drive belt for signs of wear, stretching, or cracking. Replace the belt if necessary to maintain accurate speed.

7 Смена на проблеми

If you encounter issues with your Reloop RT-1 BT, refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact Reloop customer support or your retailer.

8. Спецификации

9. Гаранција и поддршка

For warranty information, please refer to the warranty card included with your product or visit the official Reloop website. For technical support, troubleshooting beyond this manual, or service inquiries, please contact your authorized Reloop dealer or Reloop customer service directly. Keep your proof of purchase for warranty claims.