Medela Harmony

Medela Harmony Manual Breast Pump Bundle

Упатство за употреба

1. Вовед

The Medela Harmony Manual Breast Pump is designed for occasional use, offering a convenient and discreet solution for milk expression. Its lightweight and portable design makes it ideal for travel or as a backup to an electric breast pump. This bundle includes PersonalFit Flex breast shields, engineered for enhanced comfort and optimized milk flow, aiming to provide more milk faster compared to traditional 90° breast shields.

This manual provides essential information for the safe and effective use, cleaning, and maintenance of your Medela Harmony Manual Breast Pump Bundle.

Medela Harmony Manual Breast Pump in its packaging with a baby in the background.
Figure 1: Medela Harmony Manual Breast Pump Bundle packaging.

2. Што е вклучено

Your Medela Harmony Manual Breast Pump Bundle includes the following components:

Two Medela PersonalFit Flex Connectors.
Figure 2: PersonalFit Flex Replacement Connectors.

3. Информации за безбедност

ВАЖНО:

Diagram showing the closed system of Medela PersonalFit Flex Connectors, preventing milk backup.
Figure 3: Closed system design of Medela PersonalFit Flex Connectors.

4. Поставување

Before assembling your Medela Harmony Manual Breast Pump, ensure all components have been thoroughly cleaned and sterilized according to the "Cleaning and Maintenance" section.

Чекори на склопување:

  1. Insert the valve and membrane into the Harmony Connector. Ensure the membrane lies flat against the valve.
  2. Attach the PersonalFit Flex Breast Shield to the Harmony Connector.
  3. Screw the assembled breast shield and connector onto the 5oz/150mL breast milk bottle.
  4. Attach the pump handle to the Harmony Connector. The handle should click securely into place.
  5. Place the bottle onto its stand for stability.
Disassembled Medela breast pump connector and membrane.
Figure 4: Key components for assembly, including connector and membrane.

5. Упатства за работа

The Medela Harmony Manual Breast Pump features two distinct pumping phases to mimic a baby's natural feeding rhythm: a stimulation phase and an expression phase.

Процес на пумпање:

  1. Позиционирање: Center your nipple in the PersonalFit Flex Breast Shield tunnel. Ensure a comfortable seal around your breast.
  2. Фаза на стимулација: Begin by pressing the smaller, upper part of the handle (the stimulation lever) quickly and lightly. This rapid, shallow suction helps stimulate milk let-down. Continue for approximately 2 minutes or until milk begins to flow.
  3. Фаза на изразување: Once milk starts flowing, switch to the longer, lower part of the handle (the expression lever). Press this lever fully and hold for a few seconds, then release. This creates a slower, deeper suction to efficiently express milk. Adjust the rhythm and suction strength to your comfort and milk flow.
  4. Времетраење: Pump until your breast feels soft and milk flow slows significantly. This typically takes 10-15 minutes per breast.
  5. Складирање: After pumping, carefully remove the breast pump from your breast. Unscrew the bottle from the connector and seal it with the provided lid for storage.
Close-up of the Medela Harmony breast pump with Flex Technology shield, showing milk flow.
Figure 5: Medela Harmony pump in use, highlighting the Flex Breast Shield.

6. Чистење и одржување

Proper cleaning and maintenance are crucial for hygiene and the longevity of your breast pump. All parts that come into contact with breast milk should be cleaned after each use and sterilized daily.

По секоја употреба:

  1. Disassemble all parts that come into contact with breast milk (breast shield, connector, valve, membrane, bottle).
  2. Rinse all separated parts with cold water to remove milk residue.
  3. Wash parts in warm, soapy water using a mild dish soap. Use a clean brush dedicated for pump parts.
  4. Исплакнете темелно со чиста вода.
  5. Air dry on a clean paper towel or drying rack. Avoid using a cloth towel as it may leave lint.

Daily Sterilization:

In addition to washing, sterilize all milk-contacting parts once a day:

Ensure all parts are completely dry before reassembling or storing to prevent bacterial growth.

Two yellow bottle caps for Medela breast milk bottles.
Figure 6: Clean bottle caps ready for use or storage.

7 Смена на проблеми

If you encounter issues with your Medela Harmony Manual Breast Pump, refer to the following common solutions:

ПроблемМожна причинаРешение
Нема или слабо вшмукувањеImproper assembly; damaged/worn membrane or valve; breast shield not sealed properly.Ensure all parts are assembled correctly and securely. Check membrane and valve for tears or damage and replace if necessary. Reposition breast shield for a tight seal.
Milk not flowingNot enough stimulation; incorrect pumping rhythm; engorgement.Start with the stimulation phase (quick, light pumps). Adjust to a slower, deeper rhythm for expression. Apply warm compresses or massage breasts before pumping if engorged.
Болка или непријатностIncorrect breast shield size; excessive suction; improper nipple alignment.Ensure your nipple is centered and moves freely in the tunnel. Consult a lactation consultant for proper breast shield sizing. Reduce suction intensity.

8. Спецификации

9. Гаранција и поддршка

For warranty information, product support, or to purchase additional parts and accessories, please visit the official Medela webлокација или директно контактирајте ја службата за корисници на Medela. Зачувајте го доказот за купување за гаранциски барања.

Medela Official Webсајт: www.medela.com

Политика за враќање: This product has a 90-day refund/replacement return policy when purchased from Amazon.