Generic KH106 3-in-1 Carbon Monoxide Detector User Manual

1. Вовед

This manual provides essential information for the safe and effective use of your Generic KH106 3-in-1 Carbon Monoxide Detector. This device is designed to monitor carbon monoxide (CO) levels, temperature, and humidity, providing crucial environmental data and alerting you to potential CO hazards. Please read these instructions carefully before installation and operation, and retain them for future reference.

2. Производот завршиview

The Generic KH106 is a versatile safety device integrating three key monitoring functions into one compact unit. It features an advanced electrochemical sensor for accurate CO detection and a clear color LCD display for real-time readings.

Клучни карактеристики:

• Мониторинг 3-во-1: Detects Carbon Monoxide (CO), displays ambient temperature, and relative humidity.
• Напреден сензор: Utilizes an imported electrochemical sensor for high reliability and responsiveness.
• Clear Color LCD Display: Provides easy-to-read real-time values for CO concentration, temperature (1-176°F), and humidity (0-99%).
• Звучен и визуелен аларм: Features a voice and light alarm that activates when CO concentration reaches dangerous levels (>150ppm).
• Лесна инсталација: Simple plug-and-play design requires no complex wiring.
• Функција за само-тестирање: Includes a dedicated button for periodic testing of the alarm system.

Figure 2.1: The 3-in-1 display of the Carbon Monoxide Detector, showing Carbon Monoxide (CO), Humidity, and Temperature readings.

3. Поставување и инсталација

The Generic KH106 Carbon Monoxide Detector is designed for quick and easy setup. No special tools or wiring are required.

Чекори за инсталација:

1. Отпакувајте го уредот: Внимателно извадете го детекторот од пакувањето.
2. Отстранете ја заштитната фолија: Before use, peel off the protective film from the LCD screen.
3. Приклучи се: Insert the detector directly into a standard AC power outlet (220 Volts AC). Ensure it is securely plugged in.
4. Иницијализација: Upon plugging in, the device will undergo a brief calibration process. The display will show a countdown for CO levels, typically starting around 60 PPM and decreasing to 0 PPM as it stabilizes. This process usually takes about one minute.
5. Подготвен за употреба: Once the CO reading stabilizes at 0 PPM and the power indicator light is green, the detector is ready to monitor your environment.

Figure 3.1: The Carbon Monoxide Detector plugged into a standard wall outlet, ready for operation.

4. Упатства за работа

The detector operates continuously once plugged in, providing real-time environmental data.

Прикажи информации:

• Температура: Displayed in Fahrenheit (°F) at the top of the screen.
• Јаглерод моноксид (СО): Displayed in Parts Per Million (PPM) in the middle of the screen. A reading of 0 PPM indicates no detectable CO.
• Relative Humidity (RH%): Displayed at the bottom of the screen.

Индикаторски светла:

Three LED indicator lights are located below the display:

• POWER (зелено): Indicates the device is powered on and functioning normally.
• FAULT (Yellow): Indicates a malfunction or error with the device. Refer to troubleshooting.
• АЛАРМ (црвено): Illuminates and flashes when CO levels exceed the alarm threshold, accompanied by an audible alert.

Функција за само-тестирање:

To ensure the alarm is working correctly, press the 'SELF-TEST' button. The device will emit a loud alarm sound and flash the indicator lights. This confirms the alarm's functionality.

Слика 4.1: Детално view of the detector's components, including the display, self-test button, and sensor locations.

5. Информации за безбедност

Carbon monoxide is a colorless, odorless, and tasteless gas that can be fatal. This detector is a vital tool for early warning but is not a substitute for proper maintenance of fuel-burning appliances.

Праг на аларм:

The voice and light alarm will activate when the CO gas concentration reaches or exceeds 150 PPM.

Препорачано место:

Install the detector in areas where CO may accumulate or where people spend significant time. This includes kitchens, bathrooms, living rooms, bedrooms, RVs, parking lots, and near any fuel-burning appliances. Avoid placing it directly above heat sources or in areas with high humidity that could trigger false alarms.

Figure 5.1: The Carbon Monoxide Detector installed in a home, providing continuous monitoring.

6. Одржување

За да обезбедите оптимални перформанси и долготрајност на вашиот детектор:

• Редовно тестирање: Perform a self-test weekly by pressing the 'SELF-TEST' button to confirm the alarm is functioning.
• Чистење: Нежно избришете ја надворешноста на детекторот со мека, дamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the air inlet is free from dust and debris.
• Избегнувајте пречки: Ensure nothing blocks the air inlet or the display screen.

7 Смена на проблеми

If the alarm sounds or the 'FAULT' indicator lights up:

• Alarm Sounds (CO Detected): Immediately move to fresh air outdoors or open all doors and windows to ventilate the area. Call emergency services if symptoms of CO poisoning are present. Do not re-enter the premises until the CO level returns to 0 PPM and the cause of the CO leak has been identified and corrected.
• 'FAULT' Light On: Unplug the device, wait 30 seconds, and plug it back in. If the 'FAULT' light persists, the device may be malfunctioning and should be replaced.
• Нема екран/Нема напојување: Ensure the device is securely plugged into a working power outlet. Check the circuit breaker. If the issue persists, the device may require replacement.

8. Спецификации

9. Гаранција и поддршка

The manufacturer offers unconditional returns and exchanges within 90 days of purchase. For any questions or support needs, please contact the manufacturer via email. They are committed to assisting you with any issues you may encounter.