HINOMI H1 Pro V2 Ergonomic Office Chair Instruction Manual

1. Вовед и повеќеview

This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your HINOMI H1 Pro V2 Ergonomic Office Chair. Designed for optimal comfort and support, this chair features numerous adjustable components to suit individual preferences and promote a healthy posture during extended periods of sitting.

Key features include a 3D adaptive neck support, 3D lumbar technology, 5D adjustable flip-up armrests, an extendable footrest, and a foldable design for space-saving convenience.

Image 1.1: The HINOMI H1 Pro V2 Ergonomic Office Chair with its footrest extended, showcasing its reclining capability.

2. Информации за безбедност

• Тежински капацитет: This chair is designed to support a maximum weight of 150 kg (330 lbs). Do not exceed this limit to prevent damage or injury.
• Собрание: Внимателно следете ги сите упатства за склопување. Неправилното склопување може да доведе до нестабилност и потенцијални опасности.
• Наменета употреба: This chair is intended for professional or personal use in an office environment. Do not use it for purposes other than its intended design.
• Стабилност: Ensure all components are securely fastened before use. Avoid standing on the chair or using it as a step stool.
• Прилагодувања: Make adjustments slowly and carefully. Ensure hands and fingers are clear of moving parts to avoid pinching.

3. Содржина на пакетот

Пред да започнете со склопување, проверете дали сите од следниве компоненти се присутни во вашето пакување:

• Рамка за стол
• Потпирач за глава
• Piston (Gas Lift)
• Тркалца (тркала)
• Tools kit (for assembly)

4. Поставување и склопување

The HINOMI H1 Pro V2 chair is designed for quick and straightforward assembly. It can typically be assembled in 4 simple steps within 5 minutes. For detailed, step-by-step visual instructions, please refer to the official Installation Manual PDF provided by HINOMI.

Собранието чекори напредview:

1. Прикачете ги тркалата на основата на столот.
2. Insert the gas lift piston into the chair base.
3. Connect the seat mechanism to the chair backrest.
4. Place the assembled seat and backrest onto the gas lift piston.

A tools kit is included to assist with the assembly process.

Расклопување: To disassemble the chair, reverse the assembly steps. If removing the gas lift proves challenging, seek assistance or contact customer support to prevent damage.

Image 4.1: The HINOMI H1 Pro V2 chair's unique foldable design, allowing for compact storage and expanded activity space with flippable armrests.

5. Упатства за работа (прилагодувања)

The HINOMI H1 Pro V2 chair offers 16 adjustable points for a customized ergonomic fit. Familiarize yourself with these adjustments to optimize your comfort and support.

Слика 5.1: Готовоview of the chair's industry-leading adjustments for a tailored fit.

5.1 Headrest (FushionMax™)

The 3D Adaptive Neck Support allows for personalized head and neck comfort.

• Прилагодување на висината: Adjust the headrest up or down to align with your neck's natural curve.
• Прилагодување на навалување: Tilt the headrest forward or backward to support your head in various positions.
• Прилагодување на длабочина: Adjust the depth (9 cm / 3.5 inches) for closer or further support.
• Прилагодување на аголот: Adjust the angle (45°) for optimal neck alignment.

Image 5.2: Detailed adjustments for the FushionMax™ 3D Adaptive Neck Support.

5.2 Lumbar Support (FlexiLumbar™)

The 3D Lumbar Technology provides accurate support to your lower back.

• Прилагодување на висината: Adjust the lumbar support vertically (5-level adjustable height) to target the curve of your lower back (L1-L5).
• Forward Support: Adjust the forward tension (4-level) to control the intensity of the lumbar support.

Image 5.3: FlexiLumbar™ 3D Lumbar Support adjustments.

5.3 Armrests (Flip5D™)

The versatile flip-up armrests offer 5-dimensional adjustments.

• Прилагодување на висината: Adjust the armrests up or down (7 cm).
• Прилагодување на ширината: Adjust the armrests inward or outward (4 cm).
• Прилагодување на длабочина: Slide the armrest pads forward or backward (8 cm).
• Приспособување на стожерот: Rotate the armrest pads (20°).
• Функција за превртување нагоре: Flip the armrests up (90°) to move them out of the way or for space-saving.

Image 5.4: Flip5D™ Multifunctional Armrest adjustments.

5.4 Seat Depth and Height

• Длабочина на седиштето: Adjust the seat pan forward or backward to ensure proper leg support and clearance behind the knees.
• Висина на седиштето: Use the lever to adjust the seat height up or down to ensure your feet are flat on the floor or a footrest, with knees at a 90-degree angle.

5.5 Recline (FineTilt™)

The chair features a reclining function for relaxation.

• Агол на навалување: Adjust the backrest recline angle (up to 136°).
• Затегнување на навалување: Adjust the tilt tension to control the effort required to recline and the firmness of the recline.

5.6 Проширлив потпирач за нозе

The retractable footrest provides additional comfort for stretching and relaxation.

• Продолжување: Извлечете го потпирачот за нозе од под седиштето кога сакате.
• Повлекување: Push the footrest back under the seat when not in use.

Image 5.5: Retractable legrest for relaxation and comfort.

6. Одржување и грижа

Proper care and maintenance will extend the life and appearance of your HINOMI H1 Pro V2 chair.

6.1 General Product Care

• Чистење: За општо чистење, избришете ги површините со адamp cloth. For deeper cleaning, dry clean as needed.
• Инспекција: Периодично проверувајте ги сите завртки и шрафови за да се осигурате дека се стегнати. Затегнете ги повторно доколку е потребно.

6.2 Mesh Material Care

The chair features breathable and durable hybrid mesh upholstery. To maintain its condition:

• Use a fabric cleaner to remove stains.
• Редовно вакуумирајте за да ја отстраните прашината и остатоците.
• Use a wet cloth to gently wipe away grime.
• Avoid sitting on the chair with dirty or oily clothes.
• Do not use sharp objects or abrasive materials on the mesh.
• Avoid prolonged exposure to direct sunlight to prevent material degradation.

Image 6.1: Breathable and Durable Hybrid Mesh material.

7 Смена на проблеми

This section addresses common issues you might encounter with your HINOMI H1 Pro V2 chair.

7.1 Adjustments Not Holding

• Проблем: Lumbar support, armrests, or headrest settings slip or do not remain in the desired position.
• Решение: Ensure that all adjustment mechanisms are fully engaged and locked after setting. Some adjustments may require a firm push or pull to secure. If the issue persists, inspect the plastic grooves or locking mechanisms for any obstructions or damage.

7.2 Пискање или бучава

• Проблем: The chair makes squeaking or creaking noises during use.
• Решение: Check all bolts and screws for tightness and retighten if loose. Apply a small amount of silicone-based lubricant to moving parts or joints if the noise continues.

7.3 Gas Lift Malfunction

• Проблем: The chair does not stay at the desired height or sinks slowly.
• Решение: This indicates a potential issue with the gas lift piston. If the chair is within its warranty period, contact customer support for a replacement.

7.4 Functional Defects

If you encounter any functional defects not covered above, replacements may be available depending on the type and timing of the defect. Refer to the Warranty section for details.

8. Спецификации

Detailed specifications for the HINOMI H1 Pro V2 Ergonomic Office Chair:

Image 8.1: Detailed chair dimensions and size recommendations.

8.1 Size Recommendations

9. Гаранција и поддршка

HINOMI provides a comprehensive warranty for your H1 Pro V2 Ergonomic Office Chair.

9.1 Покриеност на гаранцијата

• Up to 12 Years Coverage: Skeletal Frame, Aluminum Frame, Polyamide Frame, Wheelbase.
• Up to 7 Years Coverage: Lumbar Support, Armrest Mechanism, Castor Mechanism, Central Mechanism Hub.

9.2 Important Warranty Information

• Handle the chair carefully to prevent misuse-related damage like scratches or excessive force.
• Defects beyond the specified timeframes are not eligible for replacement.
• Do not use substitution of unauthorized components for use in the Product.
• Normal wear and tear is expected over time and is not covered under warranty.

Image 9.1: HINOMI Warranty Coverage details.

9.3 Поддршка за корисници

For any inquiries, support, or warranty claims, please contact HINOMI customer service:

Е-пошта: support@hinomi.co