1. Вовед
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Pyhodi Electric Bike Lithium Modification Kit. This kit is designed to convert or upgrade electric bicycles with 36V or 48V systems, supporting 750W to 1000W motors. It includes a 30A 3-mode motor controller, an LCD M5 display panel, and a thumb throttle.
Ве молиме внимателно прочитајте го ова упатство пред инсталација и употреба за да обезбедите правилно функционирање и безбедност.
2. Инструкции за безбедност
- Always disconnect the battery before performing any installation, maintenance, or repair work on the electric bike system.
- Осигурајте се дека сите приклучоци се безбедни и правилно изолирани за да спречите кратки споеви.
- Do not attempt to modify the controller or display unit. Unauthorized modifications can lead to system failure or injury.
- Keep all electrical components away from water and moisture.
- Носете соодветна заштитна опрема, вклучувајќи ракавици и заштита за очи, за време на инсталацијата.
- Доколку не сте сигурни за кој било дел од процесот на инсталација, консултирајте се со квалификуван техничар.
3. Содржина на пакетот
Проверете дали сите артикли наведени подолу се присутни во вашиот пакет:
- 1 x 30A 3-Mode Motor Controller
- 1 x LCD M5 Display Panel
- 1 x гас за палецот
- 1 x Сензор за помош при педалите (PAS)
- Кабли за поврзување и конектори
Image: All components of the Pyhodi Electric Bike Lithium Modification Kit, including the controller, LCD M5 display, thumb throttle, and pedal assist sensor.
4. Спецификации
| Компонента | Спецификација |
|---|---|
| Контролор на моторот | 30A, 3 Modes (Sine Wave), 36V/48V Universal, Supports 750W-1000W Motors |
| Панел за прикажување | LCD M5 Display |
| Гас | Гас на палецот |
| Сензор за помош на педалите (PAS) | Вклучено |
| Тежина на ставката | Приближно 1.81 фунти (0.82 кг) |
| Димензии на пакетот | 8.27 x 5.51 x 4.33 инчи (21 x 14 x 11 см) |
5. Поставување и инсталација
Installation of this kit requires basic electrical knowledge and mechanical skills. If you are not confident in your ability to install these components, it is recommended to seek professional assistance.
5.1 Општо поврзувањеview
The controller acts as the central hub for the electric bike system. It connects to the battery, motor, display, throttle, and PAS sensor. Ensure each connector is matched correctly and securely fastened.
Image: The brushless DC motor controller showing its multiple color-coded wiring harnesses for various connections.
5.2 Чекори за инсталација
- Монтирајте го контролорот: Securely mount the motor controller to the bicycle frame in a location protected from water and physical damage.
- Connect the Motor: Connect the motor phase wires (usually three thick wires) and Hall sensor wires (usually five thin wires) from your motor to the corresponding connectors on the controller. Match colors carefully.
- Поврзете ја батеријата: Connect the battery power cables (red for positive, black for negative) to the main power input on the controller. Ensure correct polarity.
- Install and Connect the Display: Mount the LCD M5 display panel on the handlebars. Connect its wiring harness to the designated display port on the controller.
- Install and Connect the Throttle: Mount the thumb throttle on the handlebars. Connect its wiring harness to the throttle port on the controller.
- Install and Connect the PAS Sensor: Install the pedal assist sensor on the crank arm according to its specific instructions. Connect its wiring harness to the PAS port on the controller.
- Connect Brake Levers (if applicable): If your brake levers have cut-off sensors, connect them to the brake sensor ports on the controller.
- Обезбедете ги сите врски: Двојно проверете ги сите врски за затегнатост и соодветна изолација. Користете патент-врвови или завиткувања на каблите за уредно управување со жиците и спречување на заглавување.
6. Упатства за работа
6.1 Вклучување/исклучување
To power on the system, press and hold the power button on the LCD M5 display for a few seconds. To power off, repeat the action.
Image: The LCD M5 display panel, showing the screen and control buttons for operating the electric bike system.
6.2 LCD M5 Display Functions
- Приказ на брзина: Shows current speed, average speed, and max speed.
- Ниво на батерија: Го означува преостанатото полнење на батеријата.
- Ниво на помош: Displays the current pedal assist level (usually 0-5). Use the '+' and '-' buttons to adjust.
- Odometer/Trip Distance: Shows total distance traveled or current trip distance.
- Кодови за грешки: Displays specific codes if a system fault occurs. Refer to the troubleshooting section.
- Мени за поставки: Access various parameters like wheel size, speed limit, and battery voltage through the settings menu (refer to the display's specific manual for detailed navigation).
6.3 Користење на гасот на палецот
The thumb throttle provides on-demand power from the motor, allowing you to accelerate without pedaling. Gently press the lever with your thumb to engage the motor. Release the lever to disengage. Use the throttle responsibly and be aware of your surroundings.
Слика: Крупен план view of the thumb throttle, designed for easy control of motor power.
7. Одржување
- Редовна инспекција: Periodically check all wiring connections for looseness or damage. Ensure connectors are clean and dry.
- Чистење на компонентите: Wipe down the controller, display, and throttle with a soft, damp крпа. Не користете груби хемикалии или абразивни средства за чистење.
- Заштита на вода: While components are generally splash-proof, avoid submerging them in water or exposing them to heavy rain for extended periods.
- Управување со кабли: Ensure all cables are neatly routed and secured to prevent them from getting caught or damaged during riding.
- Нега на батеријата: Although the battery is not part of this kit, proper battery maintenance (charging, storage) is crucial for the overall system's longevity. Refer to your battery's specific manual.
8 Смена на проблеми
If you encounter issues, perform the following basic checks before seeking further assistance:
| Проблем | Можна причина | Решение |
|---|---|---|
| Системот не се вклучува | Battery not charged, loose battery connection, faulty display connection | Check battery charge, ensure battery is securely connected, verify display cable connection. |
| Motor not responding to throttle/PAS | Loose motor/throttle/PAS connections, brake cut-off engaged, motor/controller fault | Check all motor, throttle, and PAS connections. Ensure brake levers are not engaged. Check for error codes on the display. |
| Екранот го прикажува кодот за грешка | Specific system fault (e.g., motor Hall sensor error, controller overcurrent) | Consult the M5 display manual for specific error code meanings. Often requires checking the indicated component's connection or replacing a faulty part. |
| Неконзистентно снабдување со енергија | Loose connections, intermittent sensor fault, low battery voltage | Inspect all connections. Ensure battery is adequately charged. Check PAS sensor for proper alignment and function. |
За проблеми што не се решени со овие чекори, контактирајте ја корисничката поддршка.
9. Гаранција и поддршка
Pyhodi products are manufactured with quality and reliability in mind. For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer.
For technical support, troubleshooting assistance beyond this manual, or inquiries regarding replacement parts, please contact Pyhodi customer service through the platform where the product was purchased. Please have your product model and purchase date available when contacting support.