Instruction Manual for SHENGLE JR1932RX-P-24V Control Kit

Производот завршиview

This kit provides a replacement 2.4G Bluetooth remote control and a JR1932RX-P-24V receiver control box motherboard for children's electric ride-on cars. It is designed to restore or upgrade the remote control functionality of compatible ride-on vehicles.

• Број на модел: JR1932RX-P-24V
• Компатибилност: Designed for specific electric ride-on car models. Please verify compatibility with your original parts before purchase.
• Моќност: Operates on DC 24V with a maximum load current of 35A.
• Далечински управувач: Utilizes 2.4G Bluetooth technology for stable connection.
• Батерии: Батериите за далечинскиот управувач не се вклучени.

Image 1: The SHENGLE JR1932RX-P-24V receiver control box and its accompanying 2.4G Bluetooth remote control. The control box is dark gray with a label indicating its model number and electrical specifications. The remote control is white with black buttons for directional movement and other functions.

Поставување и инсталација

Proper installation and pairing are essential for the correct operation of the control kit. Always ensure the ride-on car's power is off before beginning installation.

1. Control Box Installation

1. Исклучете го напојувањето: Before handling any electrical components, ensure the ride-on car's battery is disconnected to prevent electrical shock or damage.
2. Locate Old Control Box: Identify the location of the existing control box in your ride-on car. This is typically found under the seat or hood.
3. Remove Old Control Box: Carefully disconnect all wiring harnesses and mounting screws from the old control box. Note the orientation and connection points for reassembly.
4. Install New Control Box: Position the new JR1932RX-P-24V control box in the same location. Secure it using the original mounting screws or appropriate fasteners.
5. Поврзете жици: Reconnect all wiring harnesses to the new control box. Ensure each connector is firmly seated. Refer to your ride-on car's original wiring diagram if available.
6. Повторно поврзете ја батеријата: Once all connections are secure, reconnect the ride-on car's battery.

Слика 2: Детален view of the SHENGLE JR1932RX-P-24V control box, highlighting its various ports and the label with electrical specifications. This image is useful for identifying connection points during installation.

2. Инсталација на батерија на далечински управувач

• Пронајдете ја преградата за батерии на задниот дел од далечинскиот управувач.
• Отворете го капакот на преградата за батерии.
• Insert the required batteries (typically AAA or AA, check the remote's markings) ensuring correct polarity (+/-).
• Добро затворете го капакот на преградата за батерии.

3. Спарување на далечинскиот управувач

The instructions for pairing the remote control with the receiver are clearly printed on the packaging box of the product. Please refer to these specific instructions for the most accurate pairing procedure. Generally, the process involves:

• Turning on the ride-on car.
• Pressing and holding a specific button (often a "code" or "pair" button) on the remote control for a few seconds.
• Observing an indicator light on the remote or car to confirm successful pairing.

If pairing is unsuccessful, ensure the remote control has fresh batteries and that the control box is correctly installed and powered.

Упатства за работа

Once the control box is installed and the remote control is paired, you can operate the ride-on car remotely.

Функции на далечински управувач

• Копче за вклучување: Го вклучува/исклучува далечинскиот управувач.
• Копчиња за напред/назад: Control the car's movement forward or backward.
• Left/Right Turn Buttons: Steer the car left or right.
• Прилагодување на брзината: Some remotes include buttons to adjust the car's speed (e.g., low, medium, high).
• Копче за итно стопирање: A dedicated button (often red) to immediately stop the car for safety.

Always supervise children when operating the ride-on car, especially when using the remote control. Ensure the operating area is clear of obstacles and hazards.

Одржување и нега

To ensure the longevity and optimal performance of your SHENGLE control kit, follow these maintenance guidelines:

• Чистење: Wipe the control box and remote control with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners.
• Складирање: Чувајте ги компонентите на ладно и суво место, подалеку од директна сончева светлина и екстремни температури.
• Нега на батеријата: Отстранете ги батериите од далечинскиот управувач ако нема да го користите подолг период за да спречите протекување.
• Заштита од влага: Protect the control box and remote from water and excessive moisture, as this can cause damage.

Решавање проблеми

If you encounter issues with your SHENGLE control kit, refer to the following common problems and solutions:

Image 3: An angled perspective of the SHENGLE JR1932RX-P-24V control box, showing its compact design and connection ports from a different view. This can assist in visualizing the component's placement within the ride-on car.

Спецификации на производот

Гаранција и поддршка

For specific warranty information or technical support regarding your SHENGLE JR1932RX-P-24V control kit, please contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

Производител: SHENGLE ELECTRONIC

Контакт информациите обично може да се најдат на пакувањето на производот или на официјалната страница на производителот. webсајт.