Fein Cordless Angle Grinder CCG 18-115-12 AS Instruction Manual

1. Вовед

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Fein Cordless Angle Grinder CCG 18-115-12 AS. This powerful and dust-resistant tool is designed for cutting, grinding, and deburring work on various materials. It features an 18V brushless motor, a 115 mm grinding wheel diameter, and is compatible with AMPShare ProCORE batteries.

2. Инструкции за безбедност

Секогаш почитувајте ги следниве безбедносни мерки за да спречите повреди и оштетување на алатката:

• Носете лична заштитна опрема (ЛЗО): Секогаш користете заштитни очила, заштита за слух, ракавици и маска за прашина.
• Безбеден работен дел: Ensure the material being worked on is firmly clampфиксирани или обезбедени за да се спречи движење за време на работата.
• Maintain Proper Grip: Hold the angle grinder firmly with both hands, ensuring a stable stance.
• Проверете дали има штета: Before each use, inspect the tool, battery, and accessories for any damage. Do not use damaged equipment.
• Користете соодветни додатоци: Only use grinding and cutting discs that are rated for the tool's speed and diameter (115 mm).
• Adjust Guard: Ensure the protective guard is correctly positioned to deflect sparks and debris away from you.
• Избегнувајте претерување: Maintain balance and control at all times.
• Одржувајте го работното место чисто: Remove flammable materials and ensure adequate ventilation.
• Исклучете го напојувањето: Always remove the battery pack before making any adjustments, changing accessories, or performing maintenance.
• Рестартирајте ја заштитата: The tool features restart protection. If power is interrupted, the tool will not restart automatically when power is restored.
• Електронска заштита од преоптоварување: The tool will shut off if overloaded to prevent damage. Reduce pressure and allow the tool to cool.

3. Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

• 1 x Fein Cordless Angle Grinder CCG 18-115-12 AS
• 1 x Separation Protection Cover
• 1 x Tool-free Quick Release Nut
• 1 x Anti-vibration Handle
• 1 x Key (for disc changes if not using quick release)
• 1 x Plastic Tool Box (L-BOXX 238)

4. Поставување

Before operating the angle grinder, ensure it is properly assembled and configured.

4.1 Инсталација на батерија

1. Ensure the battery is fully charged. The Fein Cordless Angle Grinder is compatible with all 18V AMPShare ProCORE batteries.
2. Порамнете го батерискиот пакет со приклучокот за батерија на алатката.
3. Лизнете ја батеријата во приклучокот додека не кликне безбедно на своето место.
4. За да ја извадите, притиснете го копчето за отпуштање на батеријата и извлечете ја со лизгање.

4.2 Прилагодување на штитникот

The separation protection cover must always be used. Adjust its position to provide maximum protection for the specific application.

• Loosen the guard's locking mechanism.
• Rotate the guard to the desired position, ensuring it deflects sparks and debris away from the operator.
• Tighten the locking mechanism securely.

4.3 Disc Installation (Grinding/Cutting)

Always ensure the battery is removed before changing discs.

1. Притиснете и задржете го копчето за заклучување на вретеното.
2. If using the tool-free quick release nut: Unscrew the quick release nut by hand. Remove the old disc and the lower flange.
3. Place the new 115 mm grinding or cutting disc onto the spindle, ensuring it sits correctly on the lower flange.
4. Screw the quick release nut back on and tighten it firmly by hand. Release the spindle lock.
5. If using a standard nut and key: Use the provided key to loosen and tighten the nut.

Image: A user demonstrating the installation of a grinding disc onto the angle grinder. The tool-free quick release nut is visible.

4.4 Anti-vibration Handle Attachment

Attach the anti-vibration handle to either side of the gear housing for improved comfort and control during operation.

• Screw the anti-vibration handle into one of the threaded holes on the side of the grinder head.
• Tighten it securely by hand.

5. Упатства за работа

Familiarize yourself with the tool's controls and proper operating techniques.

5.1 Powering On/Off and Speed Preselection

• Вклучување: Slide the power switch forward. The tool features a soft start function for smooth power-up.
• Исклучување: Slide the power switch backward to the OFF position.
• Electronic Speed Preselection: Use the speed dial to select the desired idle speed between 2,500 and 8,500 min⁻¹. Adjust the speed according to the material and application.

5.2 Техники на сечење и мелење

Always maintain a firm grip and stable body position. Let the tool do the work; avoid excessive pressure.

Image: A worker grinding a metal bar with the Fein angle grinder, demonstrating proper technique and safety gear.

• Мелење: Apply light, even pressure. Move the grinder smoothly across the surface. The tool's vibration damper helps ensure smooth operation.
• Сечење: За сечење, користете диск за сечење и осигурајте се дека работниот дел е безбедно прицврстен.amped. Make straight cuts, allowing the disc to cut without forcing it.

Image: A worker cutting a metal pipe with the Fein angle grinder, showing the sparks generated during the process.

Image: A worker performing a cutting operation on a metal bar with the Fein angle grinder, highlighting the tool's performance.

5.3 Напредни функции

• Blocking Monitoring: The tool is equipped with blocking monitoring, which helps prevent kickback if the disc jams.
• Следење на температурата: Innovative cooling fin technology and temperature monitoring protect the motor and battery from overheating during intensive use.

6. Одржување

Редовното одржување обезбедува долготрајност и оптимални перформанси на вашата аголна брусилка.

• Чистење: The robust motor housing is designed to be dust resistant. Regularly clean the tool's ventilation slots and exterior with a soft brush or compressed air to remove dust and debris. Ensure the battery is removed before cleaning.
• Инспекција на дискот: Before each use, inspect grinding and cutting discs for cracks, chips, or excessive wear. Replace damaged or worn discs immediately.
• Нега на батеријата: Store batteries in a cool, dry place. The Coolpack 2.0 technology helps extend battery life; however, avoid fully discharging batteries and charge them regularly.
• Генерална инспекција: Periodically check all screws and fasteners for tightness. Ensure the guard operates smoothly and locks securely.

7 Смена на проблеми

Погледнете го овој дел за вообичаени проблеми и нивни решенија.

8. Спецификации

Technical data for the Fein Cordless Angle Grinder CCG 18-115-12 AS:

• Модел: CCG 18-115-12 AS
• Батерија Voltage: 18 В
• Компатибилност со батерии: Li-ion/ProCORE Li-ion (AMPShare compatible)
• Мотор: Без четкички
• Брзина на мирување: 2,500 - 8,500 min⁻¹ (stepless electronic speed preselection)
• Grinding Wheel Diameter: 115 мм
• Elastic Sanding Disc Diameter: 115 мм
• Прирабници: М 14
• Тежина (без батерија): 2.20 кг
• Димензии на производот (Д x Ш x В): 35.7 x 25.3 x 44.2 cm
• Материјал: Metal, aluminium, copper, plastic
• Функции: Soft start, Restart protection, Electronic overload protection, Electronic speed preselection, Blocking monitoring, Vibration damper (4 additional), Temperature monitoring (Coolpack 2.0 technology)

9. Гаранција и поддршка

For warranty information, technical support, or service inquiries, please refer to the official Fein website or contact your authorized Fein dealer. Keep your purchase receipt as proof of purchase.

Fein Official Webсајт: www.fein.com