SEBSON Outdoor Motion Detector IP65 Instruction Manual

1. Вовед

This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector IP65. Please read this manual carefully before installation and use to ensure proper function and safety. Keep this manual for future reference.

SEBSON Outdoor Motion Detector IP65, anthracite color

Image 1: SEBSON Outdoor Motion Detector IP65 in anthracite.

2. Инструкции за безбедност

Инсталацијата мора да ја изврши квалификуван електричар во согласност со локалните прописи за ожичување.
Уверете се дека напојувањето е исклучено пред инсталацијата или одржувањето.
Do not exceed the maximum load capacity specified for the device.
This product is designed for outdoor use with an IP65 rating, protecting against dust and low-pressure water jets.
Avoid installing near heat sources, air conditioning units, or objects that may cause false triggers (e.g., swaying trees, reflective surfaces).

3. Карактеристики на производот

Integrated with 3 sensors for precise detection of people, large animals, and vehicles.
IP65 protection rating for outdoor use.
Suitable for surface mounting on walls or ceilings.
Maximum load capacity: 2,000W for incandescent lamps, 1,000W for LED or energy-saving lamps.
Detection area: 20 meters at 360°.
Vertical orientation adjustable by 180°.
Adjustable activation duration: 10 seconds to 30 minutes, or permanent ON/OFF.
Adjustable ambient brightness sensor: 3-2,000 LUX.

Key features of the motion detector: 20m/360 degree detection, LED up to 1000W, IP65, 10s-30min timer, 3-2000 LUX, 230V.

Слика 2: Готовоview of key product specifications and features.

4. Поставување и инсталација

4.1 Локација за монтирање

Choose a stable surface for mounting, either a wall or a ceiling. Ensure the chosen location allows for the desired detection area and is free from obstructions. The detector can be vertically oriented by 180° after installation.

Diagram showing the motion detector mounted on a wall, with an arrow indicating 180 degree vertical adjustment capability.

Image 3: Vertical adjustment range of the motion detector.

4.2 Wици

Connect the motion detector to the AC power supply (230V) and the light fixture according to the wiring diagram provided by a qualified electrician. Ensure all connections are secure and insulated.

4.3 Adjusting Detection Area

The detection range is 20m at 360°. To reduce the detection range or exclude specific areas, use the provided modified cover. Cut the cover according to the desired pattern and place it over the sensor lens.

Diagram illustrating how to cut and apply a cover to the sensor lens to modify the detection area.

Image 4: Method for adjusting the detection area using a cover.

Technical drawing showing detection patterns for wall and ceiling mounted motion detectors, indicating a 20m range and 2.2m-6m mounting height.

Image 5: Detection area diagrams for wall and ceiling mounting.

5. Упатства за работа

5.1 Time Setting (TIME)

Use the 'TIME' knob to set the duration the light remains on after motion is detected. Settings range from 10 seconds to 30 minutes. You can also set it to permanent ON or OFF.

5.2 Light Sensitivity Setting (LUX)

Use the 'LUX' knob to adjust the ambient brightness threshold at which the motion detector activates the light. Settings range from 3 LUX (darkness) to 2,000 LUX (daylight). This allows the light to only turn on when it's dark enough.

Одблиску view of the 'TIME' and 'LUX' adjustment knobs on the motion detector, showing various settings.

Слика 6: Детално view of TIME and LUX adjustment controls.

6. Одржување

Regularly clean the sensor lens with a soft, dry cloth to ensure optimal detection performance.
Не користете абразивни средства за чистење или растворувачи, бидејќи тие можат да го оштетат уредот.
Периодично проверувајте ги сите електрични врски за затегнатост и знаци на абење.
No user-serviceable parts inside. For repairs, contact qualified personnel.

7 Смена на проблеми

Проблем	Можна причина	Решение
Светлото не се вклучува кога ќе се детектира движење.	1. Incorrect LUX setting (too high). 2. Нема напојување. 3. Неисправна сијалица.	1. Adjust LUX setting to a lower value. 2. Check power connections. 3. Заменете ја сијалицата.
Светлината останува постојано вклучена.	1. TIME setting too long or set to permanent ON. 2. Постојано движење во областа на детекција. 3. Sensor obstructed or dirty.	1. Adjust TIME setting. 2. Reposition detector or adjust detection area with cover. 3. Clean sensor lens.
Light turns on without apparent motion.	1. Environmental factors (wind, heat, small animals). 2. Sensor too sensitive.	1. Reposition detector or adjust detection area with cover. 2. Ensure no objects are causing false triggers.

8. Спецификации

Бренд: СЕБСОН
Број на модел: IR_OUT_CA
Боја: Антрацит
Извор на енергија: AC (наизменична струја)
Тежина на ставката: 222 грама
Максимален опсег на откривање: 20 метри
Агол на откривање: 360°
Тип на монтирање: Surface mount (wall and ceiling)
Опис на батеријата: Батеријата не е вклучена
Температурен опсег: 20 степени Целзиусови (работно)
Компатибилни уреди: Smart Home Hub, Light
Препорачана употреба: Residential security, commercial sector, automation, energy management
Димензии: 85x55x170mm (approximate, refer to diagram for exact measurements)

Technical drawing showing the dimensions of the SEBSON motion detector, including length, width, and height measurements.

Слика 7: Димензии на производот.

9. Гаранција и поддршка

SEBSON products are designed for durability and performance. For warranty information or technical support, please refer to the official SEBSON webлокација или контактирајте го вашиот продавач. Чувајте ја сметката како доказ за купување.

За дополнителна помош, можете да ја посетите SEBSON Brand Store.

SEBSON IR_OUT_CA

SEBSON Outdoor Motion Detector IP65