Okin JLDQ.18.137.333D01 Power Recliner Motor Replacement Manual

Вовед

This manual provides detailed instructions for the installation, operation, and maintenance of the Okin JLDQ.18.137.333D01 motor, designed as a replacement part for power recliner lift chairs. Please read this manual thoroughly before attempting any installation or operation to ensure safe and correct usage.

Информации за безбедност

• Always disconnect power to the recliner before attempting any installation, removal, or maintenance of the motor. Failure to do so can result in electric shock or injury.
• Проверете дали сите врски се безбедни и правилно ориентирани пред да го вратите напојувањето.
• This motor is designed for specific power recliner lift chairs. Verify compatibility with your existing recliner model before installation.
• Држете ги рацете и лабавата облека подалеку од подвижните делови за време на работата.
• Доколку не сте сигурни за кој било чекор, консултирајте се со квалификуван техничар.

Содржина на пакетот

Пакетот ги вклучува следните ставки:

• 1 x Okin JLDQ.18.137.333D01 Refined Motor

Image: The Okin JLDQ.18.137.333D01 motor assembly, showing the main motor unit, linear actuator rod, and attached power and control cables.

Производот завршиview

The Okin JLDQ.18.137.333D01 is a linear actuator motor designed for power recliner and lift chair applications. It features a robust construction and specific connection types for integration into existing systems.

Слика: Крупен план view of the motor's identification label, displaying the model number JLDQ.18.137.333D01, voltage, maximum load, stroke, duty cycle, and various certifications (CE, cURus, TÜV Rheinland, FCC).

Типови на поврзување:

• Power Transformer Connection: 2-pin flat round male plug. This connects to the power supply unit.
• Hand Control Connection: 5-pin female plug. This connects to the recliner's hand control unit.

Слика: Детална view of the motor's connection cables, highlighting the 5-pin female plug for the hand control and the 2-pin flat round male plug for the power transformer connection.

Поставување и инсталација

This section outlines the general steps for replacing an existing recliner motor. Always refer to your recliner's specific manual for detailed disassembly and assembly instructions.

1. Исклучете го напојувањето: Unplug the recliner from the wall outlet to ensure no power is supplied to the motor or controls.
2. Пристап до моторот: Carefully turn the recliner over or tilt it to gain access to the underside where the motor is located. You may need to remove fabric covers or panels.
3. Идентификувајте врски: Note the connections of the existing motor. Typically, there will be a power connection from the transformer and a control connection from the hand remote.
4. Исклучете го стариот мотор: Disconnect the 2-pin power plug and the 5-pin hand control plug from the old motor.
5. Отстранете го стариот мотор: Unbolt or unclip the old motor from the recliner frame. Pay attention to how it is mounted.
6. Инсталирајте нов мотор: Position the new Okin JLDQ.18.137.333D01 motor in the same location as the old one. Secure it using the existing bolts or clips. Ensure it is firmly attached.
7. Поврзете го новиот мотор:
   • Connect the 2-pin flat round male plug from the power transformer to the corresponding port on the new motor.
   • Connect the 5-pin female plug from the hand control to the corresponding port on the new motor.
8. Управување со кабли: Route all cables safely, ensuring they are not pinched or in the way of moving parts. Use cable ties if necessary.
9. Вратете ја моќноста: Once all connections are secure and the motor is properly mounted, plug the recliner back into the wall outlet.
10. Тест операција: Use the hand control to test the recliner's functions (recline, lift). Ensure smooth and correct movement.

Забелешка: Before replacing the motor, always troubleshoot the switch and power supply first. Verify that the new motor's plug types match your recliner's connections.

Упатства за работа

After successful installation, operate your recliner using the existing hand control unit. The Okin JLDQ.18.137.333D01 motor will respond to the commands from your hand control to adjust the recliner's position.

• Press and hold the appropriate button on your hand control to recline or lift the chair.
• Ослободете го копчето кога ќе се постигне саканата положба.
• Avoid continuous operation for extended periods. The motor has a duty cycle of 1 minute ON / 8 minutes OFF to prevent overheating.

Одржување

Proper maintenance ensures the longevity and reliable operation of your Okin motor.

• Чистење: Keep the motor and surrounding area free from dust and debris. Use a dry cloth to wipe down the motor housing. Do not use liquid cleaners directly on the motor.
• Инспекција: Periodically inspect all cables and connections for signs of wear, fraying, or damage. Ensure all mounting bolts are tight.
• Подмачкување: The linear actuator rod is typically pre-lubricated. If you notice stiffness or unusual noise, a light application of silicone-based lubricant (avoid petroleum-based products) to the moving rod may be beneficial, but consult a professional if unsure.
• Duty Cycle Adherence: Respect the motor's duty cycle (1 minute ON / 8 minutes OFF) to prevent overheating and premature wear.

Решавање проблеми

If your recliner is not operating correctly after motor replacement, consider the following common issues:

Доколку чекорите за решавање проблеми не го решат проблемот, контактирајте ја корисничката поддршка за дополнителна помош.

Спецификации

Image: A graphic summarizing the key product features and specifications, including stroke length, minimum and maximum dimensions, and connection types, alongside an image of the motor.

Гаранција и поддршка

For warranty information or technical support regarding your Okin JLDQ.18.137.333D01 motor, please refer to the documentation provided with your original recliner or contact Okin customer service directly. You can often find support contact information on the manufacturer's webвеб-страница или преку вашиот продавач на производи.

За информации за патент, посетете ја dewertokin.com/patents.