Einhell Professional GP-PS 18/20 Li BL-Solo Power X-Change Cordless Pruning Saw

1. Производот завршиview

The Einhell Professional GP-PS 18/20 Li BL-Solo is a versatile and compact cordless pruning saw designed for cutting back and shaping trees and shrubs, shredding green waste, and cutting small sections of wood. As part of the Einhell Power X-Change family, it is compatible with all batteries and chargers from this series. This tool features a brushless motor for enhanced power and extended operating time compared to traditional carbon brush motors. Its compact and lightweight design, combined with a 15 cm cutting length and a chain speed of up to 8 m/s, makes it ideal for flexible garden use.

Figure 1: The Einhell Professional GP-PS 18/20 Li BL-Solo cordless pruning saw, shown with a compatible Power X-Change battery.

2. Инструкции за безбедност

Always observe the following safety precautions when operating the pruning saw to prevent injury and damage.

Општи безбедносни предупредувања

• Прочитајте го прирачникот: Thoroughly read and understand all instructions and safety warnings before use.
• Носете лична заштитна опрема (ЛЗО): Always wear safety glasses, hearing protection, gloves, and sturdy footwear.
• Одржувајте го работното место чисто: Ensure the work area is free from obstacles, debris, and bystanders.
• Избегнувајте влажни услови: Do not operate the pruning saw in rain or damp средини.
• Безбеден работен дел: Always ensure the material being cut is stable and cannot shift during operation.
• Ракување со две раце: Always hold the pruning saw firmly with both hands during operation.
• Превенција од повратен удар: Be aware of potential kickback and avoid cutting with the tip of the guide bar.

3. Компоненти на производот

Familiarize yourself with the main components of your cordless pruning saw:

Figure 2: Labeled diagram highlighting key features and components of the pruning saw.

• Guide Bar and Chain: High-quality cutting components for precise cuts.
• Штитник за раце: Integrated for user safety during operation.
• Foldable Chain Cover: Provides additional safety and protection.
• Мотор без четки: Delivers powerful and efficient performance.
• Рачка за затегнување на ланецот без алат: For easy adjustment of chain tension.
• Резервоар за нафта: За автоматско подмачкување на ланецот.
• Ergonomic Handle with Softgrip: Ensures comfortable and secure handling.

4. Поставување и склопување

4.1. Инсталација на батерија

1. Ensure the pruning saw is switched off.
2. Align the Power X-Change battery with the battery slot on the tool.
3. Лизнете ја батеријата во отворот додека не кликне безбедно на своето место.
4. За да ја извадите, притиснете го копчето за отпуштање на батеријата и извлечете ја со лизгање.

4.2. Guide Bar and Chain Assembly

1. Поставете ја водилката на монтажните столпчиња.
2. Carefully fit the chain around the sprocket and into the guide bar groove. Ensure the cutting edges of the chain are facing the correct direction.
3. Close the chain cover and secure it.

Figure 3: Proper installation of the guide bar and chain.

4.3. Затегнување на ланецот

The pruning saw features tool-free chain tensioning for convenience.

1. Loosen the locking knob on the side of the saw.
2. Turn the red adjustment knob to increase or decrease chain tension. The chain should be snug against the guide bar but still able to be pulled freely by hand.
3. Once tension is correct, tighten the locking knob firmly.

Figure 4: Adjusting chain tension using the tool-free knob.

4.4. Filling the Oil Reservoir for Automatic Lubrication

The pruning saw has an automatic chain lubrication system. Ensure the oil reservoir is filled before each use.

1. Пронајдете го капачето на резервоарот за масло.
2. Unscrew the cap and use the provided filling funnel to pour appropriate chain oil into the reservoir.
3. Не преполнувајте. Вратете го капачето безбедно.

Figure 5: Filling the oil reservoir for automatic chain lubrication.

5. Операција

5.1. Стартување и запирање

• За почеток: Притиснете го копчето за безбедносно заклучување, а потоа притиснете го прекинувачот-чкрапало.
• За запирање: Отпуштете го прекинувачот за активирање.

5.2. Техники на сечење

Always maintain a firm grip with both hands. Position yourself securely and ensure the workpiece is stable.

• Кастрење гранки: Support the branch if necessary to prevent it from pinching the chain. Make relief cuts if the branch is heavy.
• Сечење трупци: Place the log on a stable surface or sawhorse. Avoid cutting into the ground.
• Избегнувајте повратен удар: Never cut with the tip of the guide bar. Always use the bottom edge of the guide bar for cutting.

Figure 6: Demonstrating the pruning saw in action, cutting a log.

6. Одржување и грижа

Редовното одржување обезбедува оптимални перформанси и го продолжува животниот век на вашата пила за кастрење.

6.1. Чистење

• Секогаш вадете ја батеријата пред чистење.
• Use a brush or compressed air to remove sawdust and debris from the guide bar, chain, and motor housing.
• Избришете ја надворешноста со рекламаamp крпа. Не користете груби хемикалии.

6.2. Острење и замена на ланец

• A dull chain reduces cutting efficiency and increases kickback risk. Sharpen the chain regularly or replace it when necessary.
• The chain and guide bar can be replaced without tools by following the assembly instructions in Section 4.2.

6.3. Oiling System Check

• Regularly check the oil level in the reservoir.
• Ensure the automatic lubrication system is functioning by observing oil spray from the chain during operation.

7. Водич за решавање проблеми

Погледнете ја оваа табела за вообичаени проблеми и нивни решенија:

8. Технички спецификации

9. Гаранција и корисничка поддршка

Einhell offers a 10-year warranty on the brushless motor after online registration. For warranty claims, technical assistance, or spare parts, please contact Einhell customer support.

Контакт со производителот:
Eschenstr. 6
94405 Ландау ан дер Исар
Германија

Please visit the official Einhell website for the most up-to-date contact information and warranty registration details.