DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. Информации за безбедност

WARNING: Always read and understand all safety warnings and instructions before operating this tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Секогаш носете заштитни очила или заштитни очила со странични штитови и, по потреба, целосен штит за лице кога ракувате со овој производ.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. Производот завршиview

Содржина на пакетот

• Бежичен Бред Најлер
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• Ли-јонска батерија од 2.0 Ah
• 1-часовен брз полнач
• Торбичка за носење
• Упатство за употреба

Компоненти на алатката

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

Димензии и тежина

Figure 2: Physical dimensions and weight of the nailer (without battery).

• Должина: 10.83 инчи (27.5 см)
• Ширина: 9.45 инчи (24 см)
• Weight: 6.19 lbs (without battery)

3. Поставување

Инсталација на батерија

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. Порамнете ја батеријата со отворот за батерија на алатката.
3. Лизнете ја батеријата во отворот додека не кликне безбедно на своето место.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. Притиснете го копчето за ослободување и извлечете го капакот на списанието.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. Затворете го капакот на списанието додека не се заглави со копчето за ослободување.

Ноктите Viewer Прозорец

Ноктот viewer window allows you to quickly check the fastener level. When the window shows црвено, it indicates the magazine is without nails. When it shows црна, it indicates the magazine contains nails.

4. Упатства за работа

Режими на палење

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Figure 4: Firing mode selection switch.

Режим на единечно отпуштање

• Shift the mode switch to the левата страна (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

Контактирајте го режимот на палење

• Shift the mode switch to the десна страна (contact firing icon).
• Стиснете го чкрапалото.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

Забелешка: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

Прилагодување на длабочина

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

LED осветлување

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

LED индикатор

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• Вклучено црвено: Слаба батерија.
• Црвено трепкање: Nails/staples are jammed.
• Зелено вклучено: No nails/staples in the magazine.
• Зелено трепкање: Прегрејте.
• Исклучено светло: Нормална состојба на работа.

Официјално видео за производот

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. Одржување

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

Нега на батерии

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• Чувајте ја батеријата на ладно и суво место подалеку од директна сончева светлина и екстремни температури.

6 Смена на проблеми

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. Спецификации

Compatible Fasteners

Figure 9: Compatible nail and staple types.

8. Гаранција и поддршка

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH website. Ensure you have your model number (024009) and purchase details available when contacting support.