BLOKEES Transformers One Optimus Prime Kit - Instruction Manual

Вовед

This manual provides detailed instructions for the assembly, operation, and maintenance of your BLOKEES Transformers One Optimus Prime Kit. This kit allows you to build a detailed figure of Orion Pax, the character who becomes Optimus Prime, capturing the essence of his early form. Designed for fans of the Transformers franchise, this kit offers a creative building experience and results in a display-ready piece.

Информации за безбедност

• This product is rated for ages 15 and up. It contains small parts that may pose a choking hazard for younger children.
• Чувајте ги сите материјали за пакување подалеку од деца.
• Exercise caution when handling sharp tools (e.g., hobby knives, nippers) during assembly. These tools are not included with the kit.
• Do not attempt to modify the product in ways not described in this manual, as this may cause damage or injury.

Што има во кутијата

Your BLOKEES Transformers One Optimus Prime Kit includes the following components:

• 1x Figure (unassembled parts)

Please inspect all parts upon opening the box. If any components are missing or damaged, refer to the 'Warranty and Support' section for assistance.

Поставување и склопување

This kit requires assembly. The figure consists of approximately 150 pieces. Follow the detailed assembly instructions provided in the separate instruction booklet included with your kit. The following general steps apply:

1. Подготовка: Clear a well-lit workspace. Organize the parts by sprue number or type.
2. Отстранување на дел: Carefully remove parts from the sprues using hobby nippers to avoid stress marks or damage.
3. Чекори на склопување: Follow the numbered steps in the included instruction booklet. Pay close attention to part orientation and connection points.
4. Безбедни врски: Ensure all parts are securely connected. Some connections may require gentle pressure.

The completed figure will resemble the image below:

Image: Assembled BLOKEES Optimus Prime figure, posed with an energy axe. The figure features red, blue, and gray armor details.

Работење и прикажување

The BLOKEES Transformers One Optimus Prime Kit is designed for building and display. Please note that this model features limited articulation, as specified in its design.

• Позирајќи: While articulation is limited, you can carefully adjust the figure's stance for display. Avoid forcing joints beyond their intended range of motion to prevent breakage.
• Додатоци: The kit includes various accessories, such as weapons, which can be attached to the figure to enhance its display.

Image: Assembled BLOKEES Optimus Prime figure, shown from the side, holding a translucent green and yellow spinning energy shield.

Image: Assembled BLOKEES Optimus Prime figure, shown from the back, holding a large gray and blue rifle.

Image: Assembled BLOKEES Optimus Prime figure in a dynamic, slightly kneeling pose, showcasing неговиот детален дизајн.

Одржување

Proper care will ensure the longevity and appearance of your BLOKEES Optimus Prime figure.

• Чистење: Редовно бришете ја фигурата од прашина со мека, сува крпа или мека четка. За тврдокорна нечистотија, лесно бришете ја.ampen a cloth with water and gently wipe the surface, then dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Складирање: Store the figure in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Prolonged exposure to direct sunlight can cause discoloration or material degradation.
• Ракување: Држете ја фигурата за главните делови од телото, а не за нежни додатоци или тенки испакнатини за да спречите случајно кршење.

Решавање проблеми

Доколку наидете на какви било проблеми за време или по склопувањето, погледнете ги следниве вообичаени решенија:

• Делови што недостасуваат или се оштетени: Double-check the packaging and sprues. If a part is genuinely missing or damaged, contact BLOKEES customer support as detailed in the 'Warranty and Support' section.
• Делови кои не се вклопуваат: Ensure you are using the correct parts for the step. Verify the orientation of the parts. Sometimes, a small amount of excess plastic (flash) may need to be carefully trimmed from the connection points.
• Лабави врски: If a part feels loose, ensure it is fully pushed into place. For persistent looseness, a tiny drop of hobby-grade plastic cement (not included) can be applied to the connection point, but use sparingly and with caution.
• Кршење: If a part breaks, hobby-grade plastic cement can often repair it. Apply a small amount to the broken surfaces and hold them together until dry.

Спецификации

Гаранција и поддршка

For any questions, missing parts, or support inquiries regarding your BLOKEES Transformers One Optimus Prime Kit, please contact BLOKEES customer service. Refer to the contact information provided on the product packaging or the official BLOKEES webстраница за најактуелни детали за поддршка.

Ве молиме задржете го доказот за купување за какви било рекламации за гаранција или барања за поддршка.