1. Вовед
Welcome to the Dyness 12V 100Ah LiFePO4 Deep Cycle Battery user manual. This document provides essential information for the safe and efficient use of your battery. It is designed for various applications including RVs, marine systems, off-grid solar installations, and backup power. Please read this manual thoroughly before installation and operation.
2. Информации за безбедност
ПРЕДУПРЕДУВАЊЕ: Непочитувањето на овие безбедносни упатства може да резултира со сериозни повреди, материјална штета или смрт.
- Always wear appropriate personal protective equipment (PPE), including eye protection and insulated gloves, when handling batteries.
- Do not short-circuit the battery terminals. This can cause severe arcing, fire, or explosion.
- Keep the battery away from heat sources, open flames, and flammable materials.
- Do not disassemble, puncture, drop, or damage the battery. Internal components are hazardous.
- Ensure proper ventilation during charging and operation to prevent heat buildup.
- Use only compatible chargers specifically designed for LiFePO4 batteries (e.g., a 14.6V 20A lithium-ion charger). Using an incompatible charger can damage the battery or cause a fire.
- Avoid charging or discharging the battery outside the specified temperature ranges. The integrated BMS will provide protection, but external conditions should be monitored.
- Во случај на пожар, користете противпожарен апарат од класа D. Водата може да ги влоши пожарите од литиум.
- Да се чува подалеку од дофат на деца и домашни миленици.
- Do not connect the battery to a load or charger if it shows signs of damage, swelling, or leakage.
3. Производот завршиview
The Dyness 12V 100Ah LiFePO4 Deep Cycle Battery is a high-performance energy storage solution. It features Grade A+ lithium iron phosphate cells, offering a long cycle life and stable voltage output for reliable power.
Клучни карактеристики:
- Напреден 100A BMS: An integrated Battery Management System provides comprehensive protection against overcharge, over-discharge, over-current, short-circuit, and extreme temperatures.
- Заштита од ниска температура: Charging automatically stops below 0°C (32°F), and discharging stops below -20°C (-4°F) to ensure safety and prolong battery life.
- Продолжен век на траење на циклусот: Designed for over 4,000 deep charge-discharge cycles, with minimal capacity loss, and up to 15,000 cycles under specific conditions.
- Ниска стапка на само-празнење: Approximately 1-2% per month, significantly lower than lead-acid batteries, allowing for easier storage.
- Скалабилен дизајн: Up to 16 battery modules can be connected (4 in series x 4 in parallel) to achieve a maximum system capacity of 51.2V and 400Ah (20,480 Wh).
- Лесни: Weighs only 9.9 kg, approximately one-third the weight of comparable lead-acid batteries.
Image: Internal structure highlighting Grade A+ cells and the impressive 4000+ cycle life.
Image: Comparison of Dyness LiFePO4 battery with traditional AGM/SLA batteries, showing benefits in weight, capacity, and lifespan.
4. Поставување
4.1 Отпакување и проверка
Carefully remove the battery from its packaging. Inspect the battery for any signs of physical damage, such as cracks, dents, or swelling. If any damage is observed, do not proceed with installation and contact customer support immediately.
4.2 Почетно полнење
It is recommended to fully charge the battery before its first use to ensure optimal performance and calibration of the Battery Management System (BMS).
4.3 Поврзување
Ensure all connections are secure and properly tightened to prevent resistance and potential hazards.
- Connect the positive (+) terminal of the battery to the positive (+) terminal of your load/charger.
- Connect the negative (-) terminal of the battery to the negative (-) terminal of your load/charger.
For Multiple Batteries:
- Паралелно поврзување: To increase total capacity (Ampere-hours) while maintaining the nominal voltage (12.8V), connect positive terminals together and negative terminals together.
- Врска со серии: To increase total voltage, connect the positive terminal of one battery to the negative terminal of the next battery.
The Dyness 12V 100Ah battery supports connecting up to 16 modules (4 in series x 4 in parallel) for a maximum system of 51.2V 400Ah (20,480 Wh).
Image: Illustration of connecting multiple batteries for scalable energy storage, up to 16 modules.
4.4 Recommended Charger
Use a 14.6V 20A lithium-ion charger or connect to solar panels/generators with a rated power of ≥400W for optimal charging performance.
5. Упатства за работа
5.1 Нормална работа
The battery is designed for deep cycle applications, providing stable power output for extended periods. Monitor your system's voltage and current to ensure it operates within the battery's specifications.
5.2 Температурни размислувања
The integrated BMS actively protects the battery from extreme temperatures:
- Charging Cut-off: Charging will automatically cease if the battery temperature drops below 0°C (32°F).
- Discharging Cut-off: Discharging will automatically cease if the battery temperature drops below -20°C (-4°F).
- Charging Resumption: Charging resumes when the temperature rises above 5°C (41°F).
These features ensure the battery's longevity and safe operation in various climates.
Image: Explanation of the low temperature shutdown feature, detailing charging and discharging cut-off temperatures.
5.3 Апликации
This battery is ideal for a wide range of applications:
- Приколки и приколкиampерс
- Marine and Boat Systems
- Off-grid Solar Systems
- Photovoltaic Energy Storage
- Резервни електроенергетски системи
Note: This battery is not suitable for automotive starting applications or vehicles requiring start-stop functionality.
Image: Dyness battery being used as an emergency power source for an RV.
6. Одржување
6.1 Редовна инспекција
Periodically inspect the battery terminals for any signs of corrosion or loose connections. Ensure all connections are tight and clean.
6.2 Чистење
Keep the battery clean and dry. Use a damp cloth to wipe the exterior. Do not use solvents or abrasive cleaners, as these can damage the battery casing.
6.3 Складирање
If storing the battery for an extended period (more than one month), ensure it is charged to approximately 50-70% of its capacity. Store the battery in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures. The low self-discharge rate of LiFePO4 batteries minimizes capacity loss during storage, but periodic checks are recommended.
7 Смена на проблеми
Овој дел нуди решенија за вообичаени проблеми со кои може да се соочите. Доколку проблемот продолжи, контактирајте ја службата за корисници.
7.1 Батеријата не се полни
- Проверете ги врските: Ensure all charging cables are securely connected to both the battery and the charger.
- Проверете ја компатибилноста на полначот: Confirm that your charger is specifically designed for LiFePO4 batteries and is functioning correctly.
- Проверка на температурата: Ensure the ambient temperature is above 0°C (32°F). The BMS will prevent charging below this temperature.
7.2 Battery Not Discharging / No Power Output
- Проверете ги врските: Verify all load connections are secure and correct.
- Компатибилност со вчитување: Ensure the connected load is within the battery's specified current and power limits.
- Проверка на температурата: Ensure the ambient temperature is above -20°C (-4°F). The BMS will prevent discharging below this temperature.
- BMS заштита: The BMS may have activated a protection mode (e.g., over-discharge, short-circuit, over-current). Disconnect the load, wait a few minutes, and try reconnecting. If the issue persists, contact support.
7.3 Unusual Odor or Swelling
Immediately disconnect the battery from all loads and chargers. Do not attempt to use or charge the battery. Contact Dyness customer support without delay.
8. Спецификации
Image: Detailed dimensions of the Dyness 12.8V 100Ah LiFePO4 battery.
| Спецификација | Вредност |
|---|---|
| Бренд | Недостаток |
| Модел | 12V 100Ah LiFePO4 |
| Номинален волtage | 12.8 волти |
| Капацитет | 100 Ampere-часови (Ah) |
| Хемија на батерии | Литиум железо фосфат (LiFePO4) |
| Интегриран BMS | 100 А |
| Циклус на живот | Up to 15,000 cycles (4,000 cycles at 100% DoD) |
| Low Temperature Charge Cut-off | 0°C (32°F) |
| Low Temperature Discharge Cut-off | -20°C (-4°F) |
| Димензии (Д x Ш x В) | 33 x 17.2 x 21.4 cm (13 x 6.77 x 8.43 инчи) |
| Тежина | 9.9 кг |
| Max. Series Connection | 4 батерии |
| Max. Parallel Connection | 4 batteries (up to 16 total modules in 4S4P) |
| Сертификати | CE/UN38.3 |
9. Гаранција и поддршка
9.1 Гаранција
The Dyness 12V 100Ah LiFePO4 Deep Cycle Battery comes with a 5 година гаранција from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service conditions. Please retain your proof of purchase for warranty claims.
9.2 Поддршка за корисници
For technical assistance, warranty claims, or any questions regarding your Dyness battery, please contact Dyness customer support. Dyness offers 24/7 customer assistance for immediate support. Refer to the official Dyness webстраницата или вашата документација за купување за најактуелните детали за контакт.