1. Производот завршиview
The Cecotec Bolero Flux TLT 604400 is a 60cm telescopic extractor hood designed for efficient kitchen ventilation. It features a sleek black glass front and a stainless steel body, combining modern aesthetics with durability. This model boasts an A+++ energy rating and a powerful DC motor, ensuring high performance with low energy consumption.
Key features include a suction capacity of 431.2 m³/h, an invisible touch control panel, and innovative Hand Movement Control for adjusting settings without direct contact. It offers 3 speed levels plus a Booster function for intensive extraction, and integrated LED lighting for optimal illumination of your cooking area. The hood is equipped with 5-layer washable aluminum filters and includes carbon filters for recirculation mode.
Слика 1.1: Предна страна view of the Cecotec Bolero Flux TLT 604400 Extractor Hood, highlighting its sleek design and control panel.
Слика 1.2: The 60cm design of the extractor hood, emphasizing its elegant black glass and stainless steel construction.
2. Информации за безбедност
Please read all safety instructions carefully before installation and use. Retain this manual for future reference.
- Електрична безбедност: Осигурете се дека напојувањето одговара на јачината на звукотtage specified on the rating plate. The appliance must be properly grounded. Do not pull the power cord to disconnect from the mains.
- Инсталација: Installation must be performed by a qualified technician in accordance with local regulations. Maintain the minimum distance between the hob and the lower part of the hood as specified in the installation guide.
- Вентилација: Обезбедете соодветна вентилација во просторијата кога аспираторот се користи истовремено со апарати на гас или други горивни уреди.
- Чистење: Regularly clean the hood and filters to prevent grease accumulation, which can pose a fire hazard. Do not flambé under the hood.
- Деца и ранливи лица: Овој апарат може да го користат деца на возраст од 8 години и повеќе и лица со намалени физички, сетилни или ментални способности или недостаток на искуство и знаење доколку им се дадени надзор или инструкции за користење на апаратот на безбеден начин и ги разбираат вклучените опасности . Децата не смеат да си играат со апаратот. Чистењето и одржувањето на корисникот не смеат да го вршат деца без надзор.
- Одржување: Не обидувајте се сами да го поправите или модифицирате апаратот. За какви било поправки, контактирајте овластен сервисер.
3. Вклучени компоненти
По распакувањето, проверете дали сите компоненти се присутни и неоштетени:
- 1 x Телескопски аспиратор Cecotec Bolero Flux TLT 604400
- 1 x Упатство за употреба (овој документ)
- 2 x Carbon Filters (not pre-installed, for recirculation mode)
- Installation hardware (screws, wall plugs, etc. - specific items may vary)
4. Поставување и инсталација
Proper installation is crucial for the safe and efficient operation of your extractor hood. It can be installed in either extraction mode (ducting air outside) or recirculation mode (filtering air and returning it to the kitchen).
4.1. Проверки пред инсталацијата
- Ensure the installation area has sufficient space and structural support.
- Verify the electrical supply is compatible with the hood's requirements (220 Volts).
- If using extraction mode, ensure a suitable ducting route to the outside.
- If using recirculation mode, ensure the carbon filters are installed (see Maintenance section).
4.2. Монтирање на хаубата
- Measure and mark the drilling points on the wall or cabinet according to the provided template in the full installation guide.
- Дупчете дупки и вметнете ѕидни приклучоци.
- Secure the mounting bracket or hood to the wall/cabinet using the appropriate screws.
- Connect the ducting (if in extraction mode) or ensure the recirculation outlet is clear.
- Поврзете го аспираторот со електричната мрежа.
Слика 4.1: Dimensional diagram of the extractor hood, crucial for accurate installation planning.
5. Операција
Your Cecotec Bolero Flux TLT 604400 extractor hood offers intuitive control options for a seamless cooking experience.
5.1. Control Panel (Invisible Touch Control)
The hood features an invisible touch control panel that becomes visible when the hood is active. When off, it blends seamlessly with the black glass front.
Слика 5.1: The invisible touch control panel, showing power, speed, and light controls.
- Копче за вклучување: Press to turn the hood on/off.
- Избор на брзина: Cycle through 3 extraction speeds (Low, Medium, High) to suit your cooking needs.
- Функција на засилувач: Activate for maximum extraction power during intense cooking. This function typically runs for a set period before returning to the previous speed.
- Светло копче: Turn the integrated LED lighting on/off.
5.2. Hand Movement Control
For enhanced hygiene and convenience, the hood can be operated using hand gestures.
Слика 5.2: Demonstrating the Hand Movement Control feature for adjusting extraction speed.
- Зголемете ја брзината: Wave your hand from left to right in front of the sensor.
- Намалете ја брзината: Wave your hand from right to left in front of the sensor.
- Refer to the full manual for precise sensor location and gesture recognition.
5.3. Extraction Performance and Lighting
Слика 5.3: Visual representation of the hood's powerful 431.2 m³/h suction, ensuring a smoke-free kitchen.
Слика 5.4: The integrated LED lighting provides clear and energy-efficient illumination for your cooking zone.
6. Одржување
Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your extractor hood.
6.1. Cleaning Aluminum Grease Filters
The 5-layer aluminum grease filters should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to prevent grease buildup and maintain suction efficiency.
Слика 6.1: Illustration of the 5-layer aluminum filter, designed to capture grease effectively.
- Turn off and unplug the hood from the power supply.
- Open the hood panel and release the filter latches. Carefully remove the aluminum filters.
- The filters are dishwasher-safe. Alternatively, wash them by hand using hot water and a mild detergent. Ensure they are completely dry before re-installing.
- Re-install the filters, ensuring they are securely latched.
6.2. Replacing Carbon Filters (Recirculation Mode)
If your hood is operating in recirculation mode, the carbon filters absorb odors and should be replaced every 3-6 months, depending on usage.
Слика 6.2: Carbon filters, essential for improving air quality in recirculation mode.
- Turn off and unplug the hood from the power supply.
- Отстранете ги алуминиумските филтри за маснотии како што е опишано погоре.
- Locate the carbon filters (usually attached to the motor housing). Remove the old carbon filters by twisting or unlatching them.
- Инсталирајте нови јаглеродни филтри, осигурувајќи се дека се безбедно поставени.
- Повторно инсталирајте ги алуминиумските филтри за маснотии.
6.3. Надворешно чистење
Clean the exterior surfaces of the hood with a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that could damage the stainless steel or glass finish.
7 Смена на проблеми
Пред да контактирате со корисничката поддршка, ве молиме погледнете ги следните вообичаени проблеми и решенија:
| Проблем | Можна причина | Решение |
|---|---|---|
| Аспираторот не се вклучува | No power supply; Power cord not plugged in; Fuse blown; Control panel malfunction. | Check power connection; Check circuit breaker/fuse box; Contact qualified technician if issue persists. |
| Ниска моќ на вшмукување | Grease filters clogged; Carbon filters saturated (recirculation mode); Ducting obstructed; Incorrect installation distance from hob. | Clean aluminum filters; Replace carbon filters; Check ducting for obstructions; Verify installation height. |
| Прекумерна бучава | Loose components; Improper installation; Obstruction in fan; Motor issue. | Check for loose screws or parts; Ensure correct installation; Inspect fan for foreign objects; Contact service if motor noise is unusual. |
| Светлата не работат | LED bulb failure; Electrical connection issue. | Check if lights are properly connected; Replace LED bulbs if necessary (consult manual for type); Contact service. |
| Hand Movement Control unresponsive | Сензорот е затнат или валкан; Неточен гест. | Clean the sensor area; Ensure clear path for gestures; Refer to operation section for correct gestures. |
8. Спецификации
Detailed technical specifications for the Cecotec Bolero Flux TLT 604400 Extractor Hood:
| Карактеристика | Детал |
|---|---|
| Број на модел | A01_EU01_110282 |
| Бренд | Цекотек |
| Димензии на производот | 60 x 22 x 46.3 cm (должина x ширина x висина) |
| Тежина | 5.99 кг |
| Боја | Црното |
| Капацитет на вшмукување | 431.2 m³/h |
| Енергетска класа | А+++ |
| Тип на мотор | Мотор со еднонасочна струја |
| Тип на контрола | Invisible Touch Control, Hand Movement Control |
| Нивоа на брзина | 3 speeds + Booster function |
| Осветлување | Интегрирана LED светилка |
| Филтри | 5-layer washable aluminum filters, Carbon filters included (for recirculation) |
| Ниво на бучава | 62 децибели |
| Voltage | 220 волти |
| Земја на потекло | Шпанија |
9. Гаранција и поддршка
Цекотек е посветен на обезбедување производи со висок квалитет и задоволство на клиентите.
9.1. Достапност на резервни делови
Spare parts for this appliance are guaranteed to be available for a duration of 10 години within the EU, ensuring long-term usability and repairability.
9.2. Поддршка за корисници
For technical assistance, warranty claims, or to purchase spare parts, please contact Cecotec customer service through their official website or the contact information provided with your purchase documentation. When contacting support, please have your model number (TLT 604400 or A01_EU01_110282) and purchase date ready.