VEVOR 12 Gallon Electric Tank Water Heater

1. Вовед

This manual provides essential information for the safe installation, operation, and maintenance of your VEVOR 12 Gallon Electric Tank Water Heater. Please read these instructions thoroughly before installation and use, and retain this manual for future reference. This electric water heater is designed for point-of-use applications, providing hot water for 1-2 outlets, suitable for small apartments, studios, or remote water points.

2. Инструкции за безбедност

ПРЕДУПРЕДУВАЊЕ: Failure to follow these safety instructions may result in property damage, serious injury, or death.

• Installation must be performed by a qualified plumber or electrician in accordance with all local codes and regulations.
• Ensure the power supply matches the specifications of the water heater (120V~60Hz).
• Do not operate the water heater if it is not completely filled with water.
• Install a Temperature and Pressure (T&P) relief valve as specified in this manual and local codes. Do not block or plug the T&P valve outlet.
• Чувајте ги запаливите материјали подалеку од бојлерот.
• Regularly inspect the unit for leaks, damage, or signs of corrosion.
• Исклучете го напојувањето пред да вршите какво било одржување или сервис.

This image illustrates the multi-layer protection features of the VEVOR water heater, including dry heating protection to prevent damage from dry burning, overheat protection to reduce scalding risk, high-pressure protection against pressure-related damage, and an IPX4 waterproof rating for enhanced safety.

3. Производот завршиview

3.1 Клучни карактеристики

• Капацитет од 12 галони: Suitable for 1-2 water outlets, ideal for small living spaces.
• Брзо загревање: Equipped with a 1600W extended immersion heating tube for rapid and uniform water heating.
• Одлична изолација: Features a 20 mm thick foam insulation layer to minimize heat loss and maintain water temperature.
• Издржлива конструкција: High-temperature-resistant and corrosion-resistant enamel interior ensures long-term reliability.
• Безбедносна заштита: Built-in dry heating, overheating, and overpressure protections, along with an IPX4 waterproof rating.
• Лесно прилагодување: Simple rotary knob for temperature control and an LED indicator for heating status.

This image shows the VEVOR 12 Gallon Electric Tank Water Heater installed under a kitchen counter, demonstrating its compact size and capacity to supply hot water to both kitchen and bathroom outlets.

Оваа слика овозможува крупен план view of the water heater's internal extended immersion heating tube, illustrating its design for fast and even water temperature distribution.

This diagram shows a cross-section of the water heater's construction, detailing the metal shell for high pressure resistance, the heat insulation layer for improved heat retention, and the enamel coating for corrosion resistance and long-term use.

3.2 Вклучени компоненти

• 1 x Storage Water Heater
• 1 x T & P Relief Valve
• 1 x Security Valve
• 1 x Црево за одвод
• 1 x Лента за запечатување
• 1 x Црево Clamp

4. Инсталација

Proper installation is crucial for the safe and efficient operation of your water heater. Refer to local plumbing and electrical codes before beginning installation.

4.1 Избор на локација

• Изберете место заштитено од температури на замрзнување.
• Ensure the mounting surface is capable of supporting the full weight of the water heater when filled with water (approximately 100 lbs for 12 gallons).
• Allow adequate clearance for maintenance and service.

4.2 Приклучоци за водовод

• Connect the cold water inlet (blue) and hot water outlet (red) to your plumbing system using 3/4 inch NPT fittings.
• Install the provided T&P relief valve into the designated opening on the top or side of the water heater. Route the discharge pipe from the T&P valve to an open drain.
• Use sealing tape on all threaded connections to prevent leaks.

4.3 Електрични врски

• Пред да правите какви било електрични поврзувања, проверете дали напојувањето е исклучено кај прекинувачот.
• Connect the water heater to a dedicated 120V~60Hz electrical circuit with appropriate overcurrent protection.
• Follow the wiring diagram provided on the unit or in the full manual.

4.4 Полнење на бојлерот

• Before connecting power, open a hot water faucet in your home to allow air to escape.
• Отворете го вентилот за довод на ладна вода до бојлерот.
• Once water flows steadily from the hot water faucet, the water heater is full. Close the hot water faucet.

This image illustrates a 3-step installation process: 1. Install the three-prong plug on the right side above the heater. 2. Attach the one-way valve to the water inlet. 3. To reduce leaks during pipe connection, add a rubber sealing gasket to the end of the threads.

This diagram demonstrates two application scenarios: a 'Single Faucet Unit' where the heater supplies hot water directly to one faucet, and a 'Booster Unit' where it functions as a booster for an existing water heater system, ensuring continuous hot water during peak usage.

5. Упатства за работа

Once installed and filled with water, you can begin operating your VEVOR water heater.

5.1 Вклучување

Turn on the electrical power supply to the water heater at the circuit breaker.

5.2 Прилагодување на температурата

Use the rotary knob on the front panel to set your desired water temperature. The temperature adjustment range is typically 95°F-167°F (35°C-75°C).

5.3 LED индикатор

The LED indicator light will illuminate when the heating element is active and turn off once the set temperature is reached.

This image highlights the convenient operating system, featuring a temperature control knob for setting water temperature between 95°F-167°F and an LED indicator to display the heating status.

6. Одржување

Regular maintenance ensures optimal performance and extends the lifespan of your water heater. Always disconnect power before maintenance.

6.1 Испуштање на резервоарот

Periodically drain the tank to remove sediment buildup. This should be done at least once a year, or more frequently in areas with hard water.

1. Исклучете го напојувањето на бојлерот.
2. Затворете го вентилот за снабдување со ладна вода до бојлерот.
3. Поврзете црево со вентилот за одвод на дното од резервоарот и насочете го кон соодветен одвод.
4. Отворете го одводниот вентил и отворете славина за топла вода во вашиот дом за да влезе воздух во резервоарот, со што ќе се олесни дренажата.
5. Once drained, close the drain valve and hot water faucet, then refill the tank as described in the installation section before restoring power.

6.2 T&P Valve Inspection

Test the T&P relief valve annually by lifting the lever. Water should discharge from the drain pipe. If no water discharges, or if the valve does not reseat properly, replace it immediately.

6.3 Инспекција на анодна прачка

The anode rod protects the tank from corrosion. Inspect and replace the anode rod every 3-5 years, or more often if water conditions are aggressive.

7 Смена на проблеми

Пред да повикате сервис, повторноview следниве вообичаени проблеми и решенија:

8. Спецификации

This image provides a detailed technical drawing of the water heater, outlining its dimensions and key specifications such as power, capacity, voltage, and inlet/outlet sizes.

9. Гаранција и поддршка

For warranty information or technical support, please contact VEVOR customer service. Keep your purchase receipt and model number (FJI-POR-50S2) readily available when contacting support.

Обично можете да најдете контакт информации на официјалната страница на VEVOR. webна лице место или преку вашиот продавач.