plplaaoo WT87B Bluetooth Digital Anemometer Instruction Manual

1. Вовед

The plplaaoo WT87B Bluetooth Digital Anemometer is a high-precision handheld device designed for measuring wind speed and temperature. It features an LCD backlight display for clear readings in various lighting conditions, Bluetooth and USB connectivity for data transmission, and a durable ABS plastic construction suitable for outdoor use. This manual provides detailed instructions for the proper setup, operation, and maintenance of your anemometer.

2. Информации за безбедност

• Внимателно прочитајте ги сите упатства пред да го користите уредот.
• Do not attempt to disassemble or modify the anemometer, as this may void the warranty and cause damage.
• Држете го уредот подалеку од екстремни температури, директна сончева светлина и корозивни течности.
• Осигурајте се дека батеријата е правилно вметната според ознаките за поларитет.
• Отстранете ги искористените батерии одговорно во согласност со локалните прописи.

3. Содржина на пакетот

Ве молиме проверете го пакувањето за следните ставки:

• plplaaoo WT87B Digital Anemometer
• Платнена торба
• Висечка јаже
• USB кабел
• Упатство за употреба (овој документ)

Note: A 9V battery (6F22 type) is required but not included in the package.

4. Производот завршиview

The WT87B anemometer is designed for ease of use and accurate measurements. Below are key components and features:

Слика 4.1: Предна страна view of the anemometer, highlighting the wind impeller and LCD display.

Слика 4.2: Горе-надолу view of the anemometer, illustrating the button layout for various functions.

Клучни карактеристики:

• High-precision wind speed measurement (0-30m/s)
• Real-time, average, maximum, and minimum wind speed readings
• LCD backlight display for readability
• Bluetooth and USB connectivity for data transmission
• Unit switching (m/s, km/h, ft/min, knots, mph)
• Функција за чување податоци
• Функција на LED светло

5. Поставување

5.1 Инсталација на батерија

1. Locate the rear power cover on the back of the anemometer.
2. Disassemble the rear power cover by sliding or unscrewing it.
3. Insert one 9V (6F22 type) battery into the battery compartment, ensuring correct polarity.
4. Close the power cover tightly.

Слика 5.1: Illustration of the anemometer, including a visual guide for battery installation and button functions.

6. Упатства за работа

6.1 Вклучување/исклучување и позадинско осветлување

• За да го вклучите уредот, притиснете го црвеното копче за вклучување (LED button). The display will show the current ambient wind speed and temperature.
• To turn on the LCD backlight, press the power button again briefly.
• To power off, press and hold the red power button.

6.2 Wind Speed Measurement Modes

• Real-time Measurement: The device displays the current wind speed by default after power-on.
• Maximum/Minimum/Average Measurement: Притиснете го UP/MIN/MAX button to cycle through maximum, minimum, and current wind speed display modes.
• Average Wind Speed: Притиснете го VEL/AVG button to measure and display the average wind speed.

6.3 Префрлување на единици

To switch between wind speed units (m/s, km/h, ft/min, knots, mph), press the UNIT/DOWN копче.

6.4 Data Hold and Settings

• Притиснете го ПОСТАВУВАЊЕ/ДРЖИ key to enter the setting menu or to activate the data saving mode (data hold).
• When data hold is active, the displayed reading will be frozen. Press again to release.

6.5 Функција на LED светло

Притиснете го LIGHT/ENTER key to turn on the integrated LED light or to confirm a function within the settings menu.

6.6 Bluetooth & USB Connectivity

The anemometer supports seamless connection to a mobile phone via Bluetooth or to a computer via USB. This allows for stable and reliable data transmission. Utilize the companion app (if available for your mobile device) to monitor and analyze wind speed data with enhanced functionality.

7. Одржување

• Чистење: Користете мека, сува крпа за чистење на уредот. Не користете абразивни средства за чистење или растворувачи.
• Складирање: When not in use for extended periods, remove the battery to prevent leakage. Store the anemometer in a cool, dry place, away from direct sunlight and extreme temperatures.
• Impeller Care: Ensure the wind impeller is free from dust, debris, or obstructions for accurate readings.

8 Смена на проблеми

• Уредот не се вклучува: Check if the 9V battery is installed correctly and has sufficient charge. Replace the battery if necessary.
• Неточни мерења: Ensure the impeller is spinning freely and is not obstructed. Verify that the device is held in an open area, away from obstacles that could affect airflow.
• Bluetooth/USB connection issues: Ensure Bluetooth is enabled on your mobile device or that the USB cable is securely connected to your computer. Restart the anemometer and your connecting device if issues persist.
• Екранот е затемнет или трепери: The battery may be low. Replace the 9V battery.

9. Спецификации

10. Информации за гаранцијата

Specific warranty details for the plplaaoo WT87B Digital Anemometer are not provided in the product information. Please refer to the retailer's return policy or contact the manufacturer directly for warranty terms and conditions.

11. Поддршка

For technical assistance, troubleshooting, or further inquiries regarding your plplaaoo WT87B Digital Anemometer, please contact the seller or manufacturer through their official support channels. Refer to your purchase documentation for contact information.