Warmiehomy Rattan Dining Chairs (Set of 4)

Вовед

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Warmiehomy Rattan Dining Chairs. Please read all instructions carefully before assembly and use to ensure proper function and longevity of your chairs.

Поставување и склопување

The Warmiehomy Rattan Dining Chairs require assembly. Please ensure all components are present before beginning. It is recommended to have two people for assembly to facilitate alignment of parts.

Контролна листа на компоненти:

• Chair Frames (4 units)
• Seat Cushions (4 units)
• Rattan Backrests (4 units)
• Хардвер за склопување (завртки, шестоаголен клуч)
• Plastic Protective Pads (pre-attached or separate)

Чекори на склопување:

1. Attach the Seat Cushion to the Chair Frame: Position the seat cushion onto the chair frame. Align the screw holes on the bottom of the seat cushion with the corresponding holes on the chair frame.
2. Secure the Seat Cushion: Insert the appropriate screws (typically shorter ones) through the frame and into the seat cushion. Important: Do not fully tighten the screws at this stage. Leave them slightly loose to allow for adjustment.
3. Attach the Rattan Backrest: Align the rattan backrest with the upper part of the chair frame. Ensure the screw holes on the backrest align with the holes on the frame.
4. Secure the Backrest: Insert the appropriate screws (typically longer ones) to attach the backrest to the frame. Again, do not fully tighten these screws yet.
5. Конечно затегнување: Once all components are loosely assembled and all screw holes are aligned, gradually tighten all screws securely. Avoid excessive force, especially when tightening screws for the backrest, as the frame is wood and can crack.

For a visual guide, please refer to the assembly diagram below and the official assembly video.

Figure 1: Step-by-step assembly diagram showing how to connect the chair frame, seat, and backrest. Note the instruction to not overtighten screws initially.

Упатства за работа

These dining chairs are designed for indoor use in dining rooms, kitchens, living rooms, bedrooms, offices, guest rooms, restaurants, or coffee bars. The cantilever steel frame provides a slight bounce for comfort, and the rattan backrest offers breathability.

Упатства за употреба:

• Ensure the chair is placed on a flat, stable surface before use.
• Do not exceed the maximum load bearing capacity of 320 lbs per chair.
• Avoid standing on the chairs or using them as step stools.
• The armless design allows for easy placement around various dining tables and maximizes space efficiency.

Одржување

Proper care will extend the life and appearance of your Warmiehomy dining chairs.

Чистење:

• Перничиња за седишта: The PU leather surface is stain-resistant and easy to clean. Wipe with a soft, damp cloth. For stubborn stains, use a mild soap solution and immediately wipe dry. Avoid harsh chemicals or abrasive cleaners.
• Rattan Backrest: Gently wipe the rattan with a soft, dry or slightly damp cloth to remove dust. Avoid excessive moisture.
• Метална рамка: Wipe the chrome-plated steel frame with a soft, dry cloth. For smudges, a glass cleaner can be used, followed by a dry wipe.

Општа нега:

• Периодично проверувајте ги сите завртки и врски за да се осигурате дека се цврсто затегнати. Затегнете ги повторно доколку е потребно.
• Avoid prolonged exposure to direct sunlight or extreme temperatures, which can affect the rattan and PU leather.
• Use the provided plastic protective pads on the chair legs to prevent scratches on your floor.

Figure 2: Detail of the high-density sponge cushion with easy-to-clean PU leather surface.

Figure 3: Detail showing the breathable mesh rattan back, chrome-plated sturdy steel frame, and plastic protective pads.

Решавање проблеми

Заеднички прашања и решенија:

• Проблем: Screw holes do not align during assembly.
  Решение: This is a common issue if screws are tightened prematurely. Ensure all screws are only loosely inserted into their respective holes before attempting to fully tighten any of them. This allows for slight adjustments and alignment. Once all screws are in place, gradually tighten them in a cross-pattern.
• Проблем: The chair rocks or is unstable after assembly.
  Решение: This can occur if the frame is not evenly tightened. Loosen all screws slightly, place the chair on a flat surface, and apply even pressure to the seat. Then, gradually tighten all screws again, ensuring the chair remains stable. Check that the plastic protective pads are correctly installed on the bottom of the frame.
• Проблем: Damage to the rattan backrest during assembly.
  Решение: The rattan backrest frame is made of wood. Avoid excessive force when tightening screws into the backrest, as this can cause the wood to crack. If damage occurs, contact customer support for assistance.

Спецификации

Figure 4: Dimensional drawing of the dining chair, showing height, width, and depth measurements in both centimeters and inches.

Информации за гаранцијата

Specific warranty details for Warmiehomy products may vary. Please refer to the product packaging or the retailer's website for the most accurate and up-to-date warranty information. Typically, products are covered against manufacturing defects for a limited period from the date of purchase.

Поддршка за корисници

If you encounter any issues with your Warmiehomy Rattan Dining Chairs or require further assistance, please contact Warmiehomy customer support through the retailer where the product was purchased. You may need your purchase receipt and product model number (Dining Chair-02) for support inquiries.

For general inquiries, you can often find contact information on the Warmiehomy brand store page or the product listing on the retailer's webсајт.