beented 11LED LED Strip

11LED LED Strip Backlight Bar Instruction Manual

Model: 11LED LED Strip

Вовед

This manual provides detailed instructions for the installation, operation, and maintenance of your new 11LED LED Strip Backlight Bar. This product is designed as a replacement backlight for various 32-inch television models. Please read this manual thoroughly before installation to ensure proper function and safety.

Информации за безбедност

  • Always disconnect power to the television before attempting any installation or repair.
  • LED strips contain small electronic components. Handle with care to avoid damage.
  • Wear anti-static gloves or use proper grounding techniques to prevent electrostatic discharge (ESD) damage.
  • Овој производ не е водоотпорен. Избегнувајте изложување на влага.
  • Доколку не сте сигурни за кој било чекор, консултирајте се со квалификуван техничар.

Содржина на пакетот

Секој пакет обично содржи:

  • LED Backlight Strips (quantity as per order, e.g., 2 pcs/lot for 1 TV)
  • Pre-applied double-sided adhesive tape on each strip.
Multiple 11LED (3V) 575mm LED strips in clear plastic packaging.
Figure 1: Typical package contents showing multiple 11LED (3V) 575mm strips.

Спецификации

КарактеристикаСпецификација
Тип на ставкаStrip (LED Backlight)
Име на брендотbeented
Број на LED диоди по лента11 LED диоди
Должина на лента575 мм
Номинален волtage (per LED)3V
Извор на енергијаDC
Просечен животен век (часови)100,000
Светлосен флукс<60
Водоотпоренбр
СертификацијаCE
ПотеклоКонтинентална Кина
Компатибилни модели на телевизориVESTEL 32 inch NDV REV1.1 LC32LD145K, 32D1334DB, VES315WNDL-01, VES315WNDS-2D-R02, 32 HA5000, VESTEL 32 inch REV0.2 VES315WNDS-01, 32HXC01U, 32D1333DB, Toshiba 32L3863DG, 17DLB32NER1, Panasonic TX-32E302B, LT-32C670, LT-32C666, LT-32C672, LT-32C690, LT-32C896, Hitachi 32HE1000, DLED32265HD, DLED32167HDDVD, LG INNOTEK 32 NDV REV0.0, SVV315A38, SVV315A39, VES315WNDB-2D-N01, N02, N03, N04, N11, N12, N21
Two LED backlight strips with a measuring tape showing their length is approximately 57.5 cm.
Figure 2: LED strips showing approximate length of 575mm.
Close-up of an LED strip showing the model number JL.D320B1235-078CS-C and individual LED modules.
Figure 3: Detail of an LED strip, highlighting the model number and LED components.

Поставување и инсталација

Replacing TV backlight strips requires careful handling and some technical knowledge. Proceed with caution.

  1. Подгответе работен простор: Ensure you have a clean, well-lit, and static-free environment. Gather necessary tools (screwdrivers, pry tools, anti-static mat/wrist strap).
  2. Исклучете го напојувањето: Unplug the TV from the power outlet and disconnect all external cables.
  3. Расклопување на телевизорот: Carefully remove the TV back cover, stand, and any internal components (e.g., mainboard, power supply board, speakers) that obstruct access to the display panel. Document each step with photos if possible to aid reassembly.
  4. Отстранете го панелот за приказ: With extreme care, remove the LCD panel and diffuser layers. These components are fragile. Place them on a soft, clean surface, face down.
  5. Access Backlight Area: Once the display layers are removed, you will see the old LED backlight strips.
  6. Отстранете ги старите ленти: Gently disconnect the power connectors from the old LED strips. Carefully peel off the old strips from the TV chassis. Note their exact positioning.
  7. Инсталирајте нови ленти:
    • Ensure the new strips match the length and LED count of the original strips.
    • The new LED strips come with pre-applied double-sided tape. Peel off the protective backing.
    • Align each new strip precisely in the position of the old one and firmly press it down to ensure good adhesion.
    • Connect the power connectors to the new LED strips.
    Назад view of two LED strips showing the pre-applied double-sided adhesive tape.
    Figure 4: New LED strips with pre-applied double-sided tape for easy installation.
  8. Тест функционалност: Before reassembling the entire TV, temporarily connect the power and turn on the TV to verify that the new backlights are working correctly. Immediately disconnect power after testing.
  9. Повторно склопете го телевизорот: Carefully reassemble the TV by reversing the disassembly steps. Ensure all connectors are securely attached and screws are tightened appropriately.

Упатства за работа

These LED backlight strips are replacement components for your television's internal lighting system. Their operation is integrated with your TV's normal functions. Once installed correctly, they will illuminate when the TV is powered on and dim/turn off with the TV's backlight settings.

  • Вклучување/исклучување: The LED strips will turn on and off automatically with your television.
  • Контрола на осветленост: Any backlight brightness adjustments made through your TV's picture settings will control these LED strips.

Одржување

The LED backlight strips are designed for long-term, maintenance-free operation once installed. However, general care for your television will help prolong their lifespan.

  • Чистење: Do not attempt to clean the LED strips directly. If the TV is disassembled for other reasons, gently dust the area with a soft, dry, anti-static cloth.
  • Животна средина: Ensure the TV operates in a well-ventilated area to prevent overheating, which can reduce LED lifespan.

Решавање проблеми

ПроблемМожна причинаРешение
No backlight after installation (TV has sound, but no picture)
  • Loose or incorrect power connection to LED strips.
  • Damaged LED strip during installation.
  • Faulty power supply board or mainboard in TV.
  • Incorrect strip model for your TV.
  • Проверете ги повторно сите врски за да се осигурате дека се безбедни и правилно ориентирани.
  • Carefully inspect LED strips for any visible damage (e.g., bent LEDs, broken circuits).
  • Verify the compatibility of the LED strips with your specific TV model.
  • If issues persist, further diagnosis of TV's internal boards may be required by a professional.
Uneven brightness or dark spots
  • One or more LEDs on a strip are faulty.
  • Diffuser layers not correctly reinstalled.
  • Inspect individual LEDs for damage. Replace the affected strip if necessary.
  • Ensure all diffuser layers are clean, correctly aligned, and seated properly.
Трепкање на задното осветлување
  • Unstable power connection.
  • Faulty LED driver circuit on the TV's power supply board.
  • Проверете ги сите врски.
  • This may indicate an issue with the TV's internal power supply or LED driver, requiring professional repair.

Совети за корисникот

  • Потврдете ја компатибилноста: Always double-check the model numbers and specifications of your existing LED strips against the replacement strips before purchase and installation. Compare the length, number of LEDs, and connector type.
  • Нежно ракување: The LED strips and TV display components are delicate. Handle them with extreme care to avoid bending, scratching, or breaking.
  • Организирајте завртки: Use a magnetic mat or small containers to keep track of different types and sizes of screws during disassembly.
  • Чистота: Dust and fingerprints on diffuser layers can cause visible imperfections on the screen. Ensure all internal components are clean before reassembly.

Гаранција и поддршка

This product is tested before shipment to ensure quality. For specific warranty information, please refer to the seller's terms and conditions at the time of purchase. For technical support or further assistance, please contact the seller directly through the platform where the purchase was made.

A packaged LED strip inside a protective tube, ready for shipment.
Figure 5: Product packaging ensures safe delivery.
Documents - beented – 11LED LED Strip

нема релевантни документи