Упатство за употреба

1. Вовед

This manual provides detailed instructions for the installation, operation, and maintenance of your new STARPAD Jialing 70 JH70 Motorcycle Speedometer and Gear Indicator Assembly. Please read this manual thoroughly before installation and use to ensure proper function and safety. This instrument is designed to provide accurate speed, distance, and gear position information for compatible motorcycles.

2. Производот завршиview

The speedometer assembly integrates several key functions into a single unit, providing essential riding information at a glance.

2.1 Компоненти

• Speedometer (0-120 km/h)
• Odometer (total distance)
• Gear Position Indicator (N, 1, 2, 3, 4)
• Индикатор за фарови
• Left/Right Turn Signal Indicators
• Integrated Wiring Harness
• Speedometer Cable Connection Port
• Монтажа завртки

2.2 Визуелна референца

Слика 1: Предна страна view of the STARPAD Jialing 70 JH70 Speedometer Assembly.

Слика 2: Заден дел view of the speedometer assembly with wiring harness and mounting points.

Слика 3: Детално view на конекторите на кабелскиот сноп.

3. Спецификации

Figure 4: Approximate width measurement.

Figure 5: Approximate height measurement.

Figure 6: Approximate depth measurement.

4. Инсталација

Professional installation is recommended. Ensure the motorcycle's power is off before beginning installation.

4.1 Потребни алатки

• Комплет шрафцигер
• Комплет клучеви
• Wire strippers/crimpers (if modifying wiring)
• Електрична лента или термособирачки цевки

4.2 Чекори за инсталација

1. Подгответе го мотоциклот: Turn off the ignition and disconnect the battery to prevent electrical shorts.
2. Remove Old Speedometer (if applicable): Carefully detach the existing speedometer from its mounting bracket and disconnect its wiring harness and speedometer cable.
3. Mount the New Speedometer: Align the new speedometer assembly with the mounting points on your motorcycle. Secure it using the provided bolts or your motorcycle's original hardware. Ensure it is firmly in place and visible from the rider's position.
   

   Figure 7: Rear mounting points.

4. Connect the Speedometer Cable: Attach the mechanical speedometer cable from your motorcycle's front wheel to the designated port on the rear of the new speedometer assembly. Ensure a secure connection.
   

   Figure 8: Speedometer cable connection.
5. Поврзете го приклучокот за жици: Connect the integrated wiring harness from the speedometer to the corresponding electrical connectors on your motorcycle. Match wire colors or consult your motorcycle's wiring diagram if necessary. Ensure all connections are tight and insulated.
   

   Figure 9: Wiring harness connectors.

6. Повторно поврзете ја батеријата и тестирајте: Reconnect the motorcycle battery. Turn on the ignition and check if the speedometer powers on, and all indicator lights (headlight, turn signals, neutral) function correctly. Test the speedometer by riding at a low speed to confirm it registers speed and distance, and the gear indicator changes appropriately.

5. Операција

Once installed, the speedometer assembly operates automatically with your motorcycle's electrical system and mechanical speedometer drive.

• Брзиномер: Displays current speed in kilometers per hour (km/h).
• Километража: Records the total distance traveled by the motorcycle. This reading is cumulative and cannot be reset.
• Индикатор на менувачот: Shows the current gear engaged (N for Neutral, 1, 2, 3, 4).
• Индикаторски светла:
  • Индикатор за предни светла: Се пали кога фарот е вклучен.
  • Turn Signal Indicators: Flash when the corresponding turn signal is activated.

6. Одржување

To ensure the longevity and accuracy of your speedometer assembly, follow these simple maintenance guidelines:

• Чистење: Wipe the display and housing with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the plastic or markings.
• Врски: Periodically check all electrical connections and the speedometer cable connection for tightness and corrosion. Loose connections can lead to intermittent readings or malfunctions.
• Инспекција на кабел: Inspect the speedometer cable for any kinks, fraying, or damage. A damaged cable can cause inaccurate speed readings or complete failure. Replace if necessary.
• Заштита на животната средина: While designed for motorcycle use, prolonged exposure to extreme weather conditions (heavy rain, direct sunlight) can affect its lifespan. Consider using a motorcycle cover when parked for extended periods.

7 Смена на проблеми

If you encounter issues with your speedometer assembly, refer to the following common problems and solutions:

8. Кориснички совети

• Проверка на компатибилност: Пред купувањеasing or installing, always verify the compatibility of this speedometer assembly with your specific motorcycle model, such as the Kuba Leopard 100, to ensure proper fit and function.
• Професионална помош: If you are unsure about any installation steps or encounter persistent issues, it is highly recommended to seek assistance from a qualified motorcycle mechanic.

9. Гаранција и поддршка

За какви било прашања поврзани со производот, техничка поддршка или гаранциски барања, ве молиме контактирајте директно со продавачот или производителот. Зачувајте ја сметката за купување како доказ за купување.

Please note that this product is manufactured in Mainland China.