SINOTIMER TM928S Series Programmable Timer Switch User Manual

1. Вовед

The SINOTIMER TM928S series is a versatile 7-day programmable digital timer switch designed for household and industrial applications. It features a backlight LCD display, precise second-interval programming, and DIN rail mounting for easy integration into electrical systems. This manual provides detailed instructions for the safe installation, operation, and maintenance of your timer switch.

Клучни карактеристики:

• 16 ON/OFF setting programs per day/week
• LCD display with backlight for clear visibility
• Wide power supply range: 85-265VAC, 50/60Hz
• Manual ON/OFF/AUTO switching modes
• Built-in rechargeable battery for program memory retention (90 days black-out)
• Time setting includes hour, minute, and second, with weekly programming
• Lock function to prevent accidental changes

Figure 1: SINOTIMER TM928S Programmable Timer Switch (Front View)

2. Спецификации

Figure 2: Approximate Dimensions of the Timer Switch

3. Информации за безбедност

ПРЕДУПРЕДУВАЊЕ: Ризик од електричен удар. Инсталацијата и сервисирањето треба да ги врши само квалификуван персонал.

• Секогаш исклучувајте го напојувањето пред да го инсталирате или сервисирате уредот.
• Осигурајте се дека сите жичени врски се безбедни и се во согласност со локалните електрични кодови.
• Do not exceed the maximum load current specified for your model (16A or 30A).
• Држете го уредот подалеку од вода и прекумерна влага.
• Do not attempt to open or repair the device yourself, especially the TM928SBKL model with its non-replaceable internal battery.

4. Инсталација

4.1 Монтирање

The SINOTIMER TM928S series timer switch is designed for 35mm DIN rail mounting. Simply clip the device onto a standard DIN rail in your electrical panel.

Слика 3: Заден дел view showing DIN rail mounting mechanism

4.2 Дијаграми за поврзување

The wiring configuration depends on the model (16A or 30A) and whether a contactor is used for higher loads. Always ensure power is disconnected before wiring.

4.2.1 TM928SAKL (16A Model) Direct Load Wiring

For loads up to 16A, the timer can directly control the device. Connect the Line (L) and Neutral (N) to terminals 1 and 2 respectively for power supply. The load is connected between terminal 3 (NO - Normally Open) and the Neutral (N) line. Terminal 4 (NC - Normally Closed) is not used in this configuration.

Figure 4: Wiring for TM928SAKL (16A) Direct Load

4.2.2 TM928SAKL (16A Model) with Contactor

For inductive loads or loads exceeding 16A, a contactor must be used. The timer controls the contactor coil, which in turn switches the main load circuit. Connect the timer's output (NO terminal 3) to one side of the contactor coil, and the other side of the coil to Neutral (N). The main power for the load passes through the contactor's power contacts.

Figure 5: Wiring for TM928SAKL (16A) with Contactor

4.2.3 TM928SBKL (30A Model) Direct Load Wiring

For loads up to 30A, the TM928SBKL model can directly control the device. Connect the Line (L) and Neutral (N) to terminals 1 and 2 respectively for power supply. The load is connected between terminal 3 (NO - Normally Open) and the Neutral (N) line. Terminal 4 (NC - Normally Closed) is not used in this configuration.

Figure 6: Wiring for TM928SBKL (30A) Direct Load

4.2.4 TM928SBKL (30A Model) with Contactor

For inductive loads or loads exceeding 30A, a contactor must be used. The timer controls the contactor coil, which in turn switches the main load circuit. Connect the timer's output (NO terminal 3) to one side of the contactor coil, and the other side of the coil to Neutral (N). The main power for the load passes through the contactor's power contacts.

Figure 7: Wiring for TM928SBKL (30A) with Contactor

5. Операција

The timer switch has a clear LCD display and several buttons for configuration: MENU, Up Arrow, Down Arrow, OK, and Res (Reset).

Figure 8: Timer Display and Control Buttons

5.1 Unlocking the Device

If the display shows "LOCK ON", the device is locked to prevent accidental changes. To unlock:

• Притиснете и задржете го МЕНИ копчето за приближно 3 секунди.
• The "LOCK ON" indicator will disappear, and the device will be ready for programming.

5.2 Поставување на тековното време

After unlocking, you can set the current time:

• Притиснете го OK копче за да влезете во режим на поставување време.
• Користете го Стрелка нагоре и Стрелка надолу buttons to adjust the hour, minute, and day of the week.
• Притиснете OK повторно за да ја потврдите секоја поставка и да преминете на следната.

5.3 Програмирање циклуси на вклучување/исклучување

The timer supports up to 16 ON/OFF programs per day/week. To set a program:

• Притиснете го МЕНИ button repeatedly until you see "1 ON" (for the first ON program).
• Користете го Стрелка нагоре и Стрелка надолу buttons to set the desired time (hour, minute, second) and day(s) of the week for this ON event.
• Притиснете МЕНИ again to move to "1 OFF" (for the first OFF program).
• Set the desired time and day(s) for this OFF event.
• Repeat for up to 16 ON/OFF pairs.
• За да излезете од режимот на програмирање, притиснете го OK копче.

5.4 Manual Override (ON/OFF/AUTO)

You can manually switch the timer's output state or set it to automatic mode:

• Притиснете го МЕНИ копчето и Стрелка нагоре button simultaneously to cycle through the working statuses: ON (секогаш вклучено), НА АВТОМАТСКИ (currently on, will follow programs), ИСКЛУЧЕНО (always off), ИСКЛУЧЕНО АВТОМАТСКО (currently off, will follow programs).
• Select the desired mode. For programmed operation, ensure it is set to either "ON AUTO" or "OFF AUTO".

5.5 Ресетирање на уредот

To clear all settings and return the timer to its factory default state:

• Лоцирајте го малото Рез (Ресетирај) копче.
• Use a pointed object (like a pen tip) to press the Рез button. The display will reset.

6. Одржување

6.1 Информации за батеријата

• TM928SAKL (16A Model): This model includes a replaceable CR2032 battery. If the display becomes dim or the timer loses settings during a power outage, the battery may need replacement. To replace, carefully open the battery compartment on the back of the unit and insert a new CR2032 battery, ensuring correct polarity.
• TM928SBKL (30A Model): This model has a built-in, non-replaceable internal battery. It is designed for long-term use without battery maintenance. Do not attempt to open the unit to replace the battery.

Figure 9: TM928SAKL (16A) with Replaceable CR2032 Battery

Figure 10: TM928SBKL (30A) with Non-Replaceable Internal Battery

6.2 Чистење

Wipe the exterior of the timer switch with a soft, dry cloth. Do not use abrasive cleaners or solvents.

7 Смена на проблеми

8. Кориснички совети

• Леснотија на користење: Many users find this timer very easy to mount and program. Take your time to understand the programming steps, and you'll find it straightforward.
• Потврдете ги поставките: After programming, always double-check your ON/OFF times and selected days to ensure they match your intended schedule.
• Battery Check (16A Model): If you have the 16A model, consider having a spare CR2032 battery on hand, especially if the timer is in an area prone to power fluctuations.

9. Гаранција и поддршка

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your vendor. Keep your purchase receipt as proof of purchase.