Упатство за користење на YABER стартер за автомобил 4000A 26800mAh

1. Вовед

Thank you for choosing the YABER Car Jump Starter. This device is designed to provide a reliable solution for starting your vehicle's battery, acting as a powerful power bank, and offering emergency lighting. This manual will guide you through the proper use, maintenance, and safety precautions to ensure optimal performance and longevity of your jump starter.

Having this device in your car's trunk provides peace of mind, ensuring you can start your car and get home without waiting for roadside assistance, especially when facing issues like a battery left unused for too long or low temperatures affecting battery performance.

Common scenarios where the YABER Jump Starter is essential.

2. Важни безбедносни предупредувања

Please read and understand all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

Smart Clamps Protection Features:

The YABER Jump Starter is equipped with smart clamps that incorporate multiple protection mechanisms to ensure safe operation:

• Заштита на висока температура: Спречува прегревање за време на работата.
• Заштита од обратна врска: Alerts and prevents damage if clamps се поврзани неправилно.
• Заштита од струја: Заштита од прекумерен проток на струја.
• Заштита од обратно полнење: Prevents current from flowing back into the jump starter from the vehicle battery.
• Заштита од обратен поларитет: Ensures correct polarity connection.
• Заштита од прекумерно празнење: Ја штити внатрешната батерија од длабоко празнење.
• Заштита од полнење: Prevents overcharging of the internal battery.
• Заштита од краток спој: Автоматски се исклучува во случај на краток спој.

Паметниот clamps provide multiple layers of safety.

Visual representation of the smart clamp заштитни карактеристики.

Општи безбедносни мерки на претпазливост:

• Не го потопувајте производот во вода.
• Не ракувајте со производот во експлозивни атмосфери, како на пример во присуство на запаливи течности, гасови или прашина.
• Не менувајте или расклопувајте го производот.
• Да се ​​чува подалеку од дофат на деца.
• Use only the provided smart clamps and cables.

3. Содржина на пакетот

Ве молиме проверете го пакувањето за следните ставки:

• Car Jump Starter (YA40) x 1
• Protective Smart Clamps (Red = positive; Black = negative) x 1
• USB-кабел од тип C x 1
• Inflator Hose x 1 (if applicable to your model variant)
• Упатство за употреба x 1
• Кутија за складирање x 1

The YABER Jump Starter and its included accessories.

4. Карактеристики на производот

The YABER Car Jump Starter is a versatile device offering multiple functionalities:

• Моќен стартер за скокање: Delivers 4000A peak current, capable of starting all 12V gasoline engines and up to 10.0L diesel engines.
• Енергетска банка со висок капацитет: Features a 26800mAh battery capacity with two USB outputs (5V/2.4A, 9V/2A) and a USB-C input (5V/9V 2A) for fast charging of mobile devices.
• 12V/10A DC излез: Provides power for various 12V accessories.
• LED светло за итни случаи: Integrated flashlight with 3 modes: Illumination (Normal), Strobe, and SOS for emergency situations.
• Extreme Temperature Operation: Designed to work reliably in temperatures ranging from -20℃ to +60℃ (-4°F to 140°F).
• Smart Clamps: Equipped with multiple safety protections as detailed in the Safety Warnings section.

Во текот наview of the YABER Jump Starter's multi-functional capabilities.

5. Спецификации

The jump starter is designed for reliable performance in a wide range of temperatures.

6. Поставување и почетна наплата

Before first use, ensure the jump starter is fully charged. It is recommended to fully charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided Type-C USB cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB cable to a suitable USB wall adapter (not included) or a powered USB port.
3. The digital display on the jump starter will show the charging progress. Charge until the display shows 100%.

The device supports two-way fast charging, allowing for quick recharging of the unit itself.

7. Упатства за работа

7.1. Палење на возило со џебови

Уверете се дека стартерот е наполнет најмалку 50% пред да се обидете да го стартувате возилото со помош на кабли.

1. Вметни: Приклучете го паметниот clamp cable into the jump starter's 12V jump start port. Ensure it is fully inserted.
2. Поврзете се: Прикачете го црвениот (+) clamp to the positive terminal of your vehicle's battery and the black (-) clamp to the negative terminal. The smart clamps will indicate if the connection is correct.
3. Започнете: Start your car's engine. If it doesn't start immediately, wait 20-30 seconds and try again. Do not crank for more than 3 seconds per attempt.
4. Отстрани: Once the car starts, immediately remove the smart clamps from the car battery, then unplug the smart clamp кабел од стартерот за кабини.

Visual guide for the jump starting process.

The YABER Jump Starter is suitable for a wide range of 12V vehicles.

7.2. Користење како Power Bank

The jump starter can charge your electronic devices via its USB output ports.

1. Connect your device's USB charging cable to one of the jump starter's USB output ports (USB-1 or USB-2).
2. Стартерот автоматски ќе започне со полнење на вашиот уред.
3. Дигиталниот дисплеј ќе го прикаже преостанатиот процент на батеријатаtage.

Charging multiple devices simultaneously with the power bank function.

7.3. Using the LED Emergency Light

The built-in LED light has three modes: Illumination (normal flashlight), Strobe, and SOS.

1. Press and hold the power button for approximately 3 seconds to turn on the Illumination mode.
2. Press the power button briefly to cycle through the modes: Illumination > Strobe > SOS.
3. Press and hold the power button again for 3 seconds to turn off the light.

The LED light provides versatile illumination for various situations.

Детално view of the LED emergency light modes.

8. Одржување и складирање

• Полнење: Полнете го акумулаторот на секои 3-6 месеци, дури и ако не се користи, за да го продолжите животниот век на батеријата.
• Чистење: Користете сува, мека крпа за чистење на уредот. Не користете груби хемикалии или абразивни материјали.
• Складирање: Store the device in a cool, dry place away from direct sunlight, heat sources, and moisture. Keep it in its protective storage box when not in use.
• Температура: Avoid storing the device in environments outside its operating temperature range (-20℃ to +60℃).

9 Смена на проблеми

Уредот нема да се вклучи:

• Ensure the device is charged. Connect it to a power source using the Type-C cable.

Vehicle will not jump start:

• Проверете дали паметниот клamp cable is fully inserted into the jump starter.
• Ensure the red (+) and black (-) clamps are connected correctly to the vehicle battery terminals. The smart clamps should indicate a correct connection.
• Verify that the jump starter has sufficient charge (at least 50%).
• If the vehicle battery is completely dead, it may take a few attempts. Wait 20-30 seconds between attempts.
• Ако паметниот клamps show an error, refer to the smart clamp's indicator guide (if available) or disconnect and reconnect carefully.

Уреди што не се полнат од полнач:

• Осигурајте се дека стартерот за џампови има доволно полнење.
• Check that the USB cable is securely connected to both the jump starter and your device.
• Обидете се со друг USB-кабел или приклучок.

10. Кориснички совети

• Always keep the jump starter charged, especially before long trips or during winter months when car batteries are more prone to failure.
• Familiarize yourself with the smart clamp indicators. They are designed to provide immediate feedback on connection status and potential issues.
• When jump starting, ensure your vehicle's ignition is off before connecting the clamps.
• After a successful jump start, allow your car's engine to run for a few minutes to recharge its battery before turning it off.

11. Гаранција и поддршка

YABER products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact YABER customer service through the official webлокација или вашето место за купување.

Ве молиме чувајте го вашиот доказ за купување за барањата за гаранција.

12. Најчесто поставувани прашања (ЧПП)

Q: What power does the device charge? Is it 110V or 220V?

A: The YABER Jump Starter charges via a USB-C input (5V/2A, 9V/2A). You can use any standard USB wall adapter (110V or 220V compatible) with a USB-C output to charge the device. The jump starter itself does not have a direct 110V or 220V input.

Q: Is the product new and does it come with a warranty?

A: Yes, all new YABER products are sold with a manufacturer's warranty. Please refer to the 'Warranty and Support' section for more details.