1. Вовед
Thank you for choosing the BSIDE Z2 Smart Voltage Tester. This device is a versatile, non-contact electrical testing tool designed for safety and convenience. It features AC voltage detection, live/neutral wire checking, breakpoint detection, and circuit continuity testing, all presented on a clear LCD HD display with backlight. This manual provides essential information for the safe and effective operation and maintenance of your device.
2. Информации за безбедност
ПРЕДУПРЕДУВАЊЕ: Секогаш бидете исклучително внимателни кога работите со електрична енергија. Непочитувањето на безбедносните мерки на претпазливост може да резултира со сериозни повреди или смрт.
- Не го користете уредот ако изгледа оштетен или не работи правилно.
- Пред употреба, проверете дали преградата за батерии е безбедно затворена.
- Не го надминувајте максималниот волуменtage range specified (0-300V AC).
- This device is designed for non-contact detection. Avoid direct contact with live circuits unless absolutely necessary and with appropriate safety gear.
- Чувајте го уредот подалеку од деца.
- Секогаш проверувајте го отсуството на томtage with a known working device before touching any electrical components.
3. Содржина на пакетот
Upon opening your BSIDE Z2 Smart Voltage Tester package, please ensure all items are present and in good condition:
- BSIDE Z2 Smart Voltagд Тестер
- Сертификат за квалитет
- Упатство за употреба (овој документ)
- Screwdriver (for battery replacement)
- AAA 1.5V Batteries (x2) - Note: Batteries are included.
4. Производот завршиview
The BSIDE Z2 is a pen-style intelligent multimeter designed for ease of use and portability. It features a large LCD HD display for clear readings and intuitive controls.
Клучни компоненти:
- Watch Cap / Nib Protection: Protects the test nib when not in use.
- Test Nib: The sensing tip for voltage and continuity detection.
- Екран за прикажување: Large LCD HD display for showing measurements and indicators.
- AC Voltage Measurement Button: Activates AC voltagрежим на детекција.
- Копче за префрлување на функции: Toggles between different measurement functions.
- On-Off Key: Го вклучува и исклучува уредот.
- Порта за батерија: Се наоѓа на дното за пристап до батеријата.
- LED фенерче: Обезбедува осветлување во темни средини.
5. Поставување
Инсталација на батерија
The BSIDE Z2 requires two AAA 1.5V batteries for operation. Follow these steps to install or replace the batteries:
- Locate the bottom screw on the device.
- Use the provided screwdriver to unscrew the bottom screw.
- Gently slide off the lower case of the tester.
- Insert two new AAA 1.5V batteries, ensuring correct polarity (+/-).
- Slide the lower case back into place and secure it with the screw.
6. Упатства за работа
To power on the device, press the red On-Off key. The device will automatically shut down after 5 minutes of no operation to conserve battery life.
6.1. AC Voltage Detection (Non-Contact)
The Z2 features a non-contact voltage detection (V~Alert) function. Simply bring the test nib close to the wire or outlet you wish to test. The device will indicate the presence of AC voltage through visual and audible alarms.
6.2. Live/Neutral Wire Check
To distinguish between live and neutral wires, use the test nib to approach each wire. The device will compare the strength of the detected voltagе сигнал:
- Животна жица: The device will detect a stronger voltage signal, typically indicated by a red backlight and a higher reading.
- Неутрална жица: The device will detect a weaker or no voltage signal, typically indicated by a green backlight.
6.3. Zero Fireline Detection (Breakpoint Finding)
This function helps identify the live (fire) line and the neutral (zero) line, and can also assist in finding breakpoints in a live wire.
- Fire Line Measurement: When the test nib is near the fire line, the backlight turns red, and an alarm sound is issued.
- Zero Line Measurement: When the test nib is near the zero line, the device will show no reactivity or a green screen display.
6.4. Circuit Continuity Check
The device can check if a circuit is on or off by sensing the strength of the signal. This is useful for identifying breaks in wires or checking switch functionality.
- High Signal Intensity: Red backlight flashes, indicating continuity or a strong signal.
- Medium to Low Signal Strength: Green backlight flashes, indicating a weaker signal or partial continuity.
6.5. LED Flashlight Function
The integrated LED flashlight provides convenient lighting in dimly lit work areas. Activate it by pressing the dedicated light button.
6.6. Видео демонстрација
7. Спецификации
Below are the technical specifications for the BSIDE Z2 Smart Voltagе Тестер:
| Технички индекс | Параметар |
|---|---|
| Наизменична струја волtagе прецизност | Range: 12-300V, Resolution: 1V, Accuracy: ±5.0% |
| Приказ | LCD дисплеј (аналоген и дигитален) |
| Sampстапка на линг | 0.5 секунда |
| Режим на аларм | Analogue bar, backlight and beep |
| Време на автоматско исклучување | Околу 5 минути |
| Работна температура и влажност | 0-40°C, 0-90% RH |
| Температура и влажност на складирање | -20-60°C, 0-75% RH |
| Напојување | 1.5V AAA × 2 (Battery Included: Yes) |
| Работна надморска височина | 2000 m макс |
| Димензии | 22*22.5*188мм |
| Тежина | 50 гр |
| Сертификација | CE, FCC, RoHS |
| Направи сам за себе | Електрични |
| Хемикалија со висока загриженост | Никој |
8. Одржување
Proper care and maintenance will ensure the longevity and accuracy of your BSIDE Z2 Smart Voltage Тестер.
- Чистење: Избришете го уредот со сува, мека крпа. Не користете абразивни средства за чистење или растворувачи.
- Складирање: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the operating and storage temperature/humidity limits are respected (see specifications).
- Нега на батеријата: Доколку уредот не се користи подолг период, извадете ги батериите за да спречите протекување и оштетување.
- Nib Protection: Always keep the watch cap on the test nib when not in use to prevent damage and ensure safety.
9 Смена на проблеми
If you encounter issues with your BSIDE Z2, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Уредот не се вклучува. | Мртви или неправилно инсталирани батерии. | Заменете ги батериите со нови AAA батерии од 1.5 V, внимавајќи на правилниот поларитет. |
| Неточни или неконзистентни мерења. | Low battery, interference from other electrical fields, or device malfunction. | Replace batteries. Move away from strong electromagnetic fields. If problem persists, contact support. |
| No detection when voltagе присутен. | Device not powered on, low battery, or incorrect operating mode. | Ensure device is on. Check/replace batteries. Verify correct mode for detection. |
| Automatic shutdown occurs too quickly. | Normal operation (5-minute inactivity shutdown). | This is a power-saving feature. Simply power the device back on. |
10. Кориснички совети
- For best non-contact detection results, ensure the test nib is as close as possible to the conductor without touching it.
- When checking live/neutral wires, observe both the display reading and the backlight color for a clear indication.
- Utilize the built-in LED flashlight when working in poorly lit areas to improve visibility and safety.
- Always test the device on a known live circuit before using it on an unknown circuit to confirm it is functioning correctly.
11. Гаранција и поддршка
BSIDE products are manufactured to high-quality standards. This product comes with a 12-month warranty from the date of purchase, covering manufacturing defects. For technical support, warranty claims, or any questions regarding your BSIDE Z2 Smart Voltage Tester, please contact the BSIDE Official Store customer service. Please retain your proof of purchase for warranty validation.
