Yieryi 6-in-1 Soil Tester Instruction Manual

1. Вовед

The Yieryi 6-in-1 Soil Tester (Model YY-1106) is a versatile device designed to provide comprehensive insights into your soil's health. It accurately measures six critical parameters: soil pH, moisture content, temperature, fertility, ambient sunlight intensity, and air humidity. This rechargeable tool is ideal for gardeners, farmers, greenhouse operators, and anyone looking to optimize growing conditions for potted plants and agricultural fields.

2. Карактеристики на производот

• 6-in-1 Real-Time Detection: Measures soil moisture (0–99%), pH value (3.5–9.0), soil temperature (16–122°F), sunlight intensity (0–100000LUX), environmental humidity (0–99%), and soil fertility (0–3000μS/cm).
• Голем LCD екран со позадинско осветлување: Ensures clear readability in various lighting conditions, including dark environments.
• Дизајн со ротирачки 90°: The display head can be adjusted for optimal viewing angles, especially useful in complex planting setups.
• Брзи и точни читања: Equipped with dual durable alloy probes for precise data detection within 3 seconds.
• USB се полни: Features a high-capacity lithium battery with USB Type-C charging for extended use and convenience.
• Разновидна апликација: Suitable for a wide range of plants and environments, including home gardens, greenhouses, and agricultural fields.

3. Спецификации

• Тип на приказ: LCD екран со позадинско осветлување
• Агол на ротација: Adjustable screen, can rotate 90°
• Начин на полнење: USB Type-C direct charging
• Тип на батерија: Вградена литиумска батерија со висок капацитет
• Употреба: Insert directly into soil
• Материјал: Alloy/aluminum probe, ABS body
• Нето тежина: 74 гр
• Големина на производот: 222 × 46 × 28 мм

4. Поставување

4.1 Полнење на уредот

The Yieryi Soil Tester comes with a built-in high-capacity lithium battery. Before initial use, or when the battery indicator on the display shows low power, charge the device using the provided USB Type-C cable.

1. Connect the USB Type-C cable to the charging port on the side of the device.
2. Поврзете го другиот крај од USB кабелот со стандарден USB адаптер за напојување (не е вклучен) или USB порт на компјутерот.
3. The device will indicate charging status on its display. Charge until the battery icon shows full.

5. Упатства за работа

5.1 Подготовка за мерење

• Ensure the soil to be tested is moist. If the soil is dry, water it thoroughly and wait for about 20-30 minutes before testing to allow water to penetrate.
• Avoid testing extremely hard or rocky soil, as this can damage the probes.
• The device is designed for soil testing only and is not suitable for hydroponic solutions or other liquids.

5.2 Преземање на мерење

1. Gently insert the soil detector probes into the soil to a depth of approximately 100-160mm (4-6 inches). Ensure both probes are fully submerged in the soil for accurate readings.
2. Adjust the screen angle by rotating the display head up to 90 degrees for optimal viewинг.
3. Press the power button briefly to turn on the device and initiate data collection.
4. During the data collection process, the moisture and pH indicators will flash for approximately 7 seconds.
5. Once the values stabilize, read the measurements directly from the LCD display. The screen will show pH, moisture, temperature, fertility, sunlight intensity, and air humidity.

5.3 Интерпретација на читања

• pH вредност: Understand your soil's acidity or alkalinity. Different plants thrive in specific pH ranges.



• Влага: Indicates the water content in the soil. Keep an eye on this to prevent over or under-watering.
• Температура: Soil temperature affects root growth and nutrient uptake.
• Плодност: Measures the electrical conductivity (EC) of the soil, which correlates with nutrient levels.
• Интензитет на сончева светлина: Helps determine if your plants are receiving adequate light.
• Влажност на воздухот: Provides ambient humidity levels, important for plant transpiration and overall health.

6. Одржување

6.1 Cleaning the Probes

To ensure accurate and consistent readings, it is crucial to clean the metal probes after each measurement.

1. After removing the device from the soil, use a clean tissue or a soft scouring pad to gently wipe any soil residue from the alloy probes.
2. Do not use abrasive materials or harsh chemicals that could damage the probe surface.
3. Ensure the probes are completely dry before storing the device.

6.2 Складирање

Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Keep it away from children and pets.

7 Смена на проблеми

• Неточни читања:
  • Ensure probes are clean and free of residue.
  • Verify the soil is adequately moist before testing.
  • Ensure probes are inserted to the recommended depth (100-160mm).
  • Avoid testing in extremely hard or rocky soil.
• Device Not Turning On/Display Issues:
  • Проверете го нивото на батеријата и наполнете ја доколку е потребно.
  • Проверете дали копчето за вклучување е цврсто притиснато.
• Device Damaged or Malfunctioning:

  If the product is damaged, cannot be calibrated, or does not work normally despite following the instructions, please contact customer support for assistance. Do not attempt to disassemble or repair the device yourself.

8. Кориснички совети

• For best results, take multiple readings in different spots within the same area and average them.
• Regularly monitor your soil conditions, especially during changes in weather or plant growth stagес.
• Keep a log of your readings to track trends and understand your plants' needs over time.
• Remember that the device measures soil temperature when inserted into the soil, and air humidity when not inserted.

9. Гаранција и поддршка

For warranty information, technical support, or any inquiries regarding your Yieryi 6-in-1 Soil Tester, please contact the seller or manufacturer directly through your purchase platform. Please have your model number (YY-1106) and purchase details ready when contacting support.