Упатство за производот NYXI Wizard Wizard Wizard Wizard

Вовед

Почитуван играч,

Ви благодарам за купувањетоasing the NYXI Wizard Wireless Joy-pad. This manual provides detailed instructions for setting up, operating, and maintaining your new controller. Please read it carefully before use to ensure optimal performance and a better gaming experience.

Забелешка: For a better gaming experience, please fully charge the controller when using it for the first time.

Содржина на пакетот

Осигурајте се дека сите од следниве артикли се вклучени во вашиот пакет:

• 1 x Лева рачка
• 1 x Десна рачка
• 1 x USB кабел за полнење
• 1 x Упатство за употреба
• 1 x Среден мост (Рамка)
• 2 x кружни резервни прстени за клатење

Спецификации

Водич за поставување

1. Wired Direct Connection

To connect the Joy-pad directly to your Nintendo Switch console, slide the left and right handles onto the sides of the console until they click into place. The console will automatically recognize the controllers.

Diagram: Wired direct connection to the console.

2. Безжична врска

За да се поврзете безжично:

1. Open your Nintendo Switch console.
2. Одете до: Системски поставки > Контролори и сензори > Променете го зафат/нарачка.
3. On the NYXI Wizard Joy-pad, long-press the СИНИНЦИРАЈ key. The four channel lights on the controller will flash.
4. The Joy-pad will automatically connect to the console.

Image: Pressing the SYNC button for wireless pairing.

3. Упатство за полнење

• When the controller is turned off and charging, the LEDs will flash. They will turn off once fully charged.
• When charging wirelessly, the corresponding channel light will flash slowly. It will stay on solid when fully charged.
• The controller can also be charged by attaching it to the Switch console, which is then connected to a power adapter. If the console is not plugged into a power adapter, it will charge the controller when the controller's voltagе под 3.7V.
• Аларм за слаба батерија: If the controller battery voltage drops below 3.3V, the corresponding channel light will flash, indicating that charging is required.

4. Wake Up Function

You can wake up the controller from sleep mode by pressing any button, except for L3, R3, TURBO, Profile, FL, and FR buttons. The controller will then attempt to reconnect to the console.

Забелешка: Do not touch the 3D joystick during the connection process to avoid accidental input.

Упатства за работа

1. Turbo Function and Speed Adjustment

The Turbo function allows for rapid, repeated input of a button.

• Режим на поставување: Притиснете ТУРБО + any settable function button (UP, DOWN, LEFT, RIGHT, A, B, X, Y, L, R, ZL, ZR).
• Континуиран режим:
  1. Притиснете ТУРБО + function button once for manual continuous turbo.
  2. Притиснете ТУРБО + function button twice for automatic continuous turbo.
  3. Притиснете ТУРБО + function button three times to turn off continuous turbo.
• Cancel All Turbo: Долго притиснете ТУРБО for three seconds to cancel the burst function for all buttons.
• Турбо прилагодување на брзината:
  • Left-hand grip: Press ТУРБО + - (minus button)
  • Right-hand grip: Press ТУРБО + + (plus button)

  Adjustable burst speeds: 5HZ, 12HZ, 20HZ. The default speed is 12HZ.

• Turbo Setting Indicator: The LED lights up white when the button is not set. It turns blue after setting and flashes blue with the burst speed when active.

2. Back-Button Mapping & Macro Programming

The controller must be connected to the console. Please cancel any continuous turbo settings before programming.

• Back Button Mapping Method:
  • Left Back Button (FL): Притиснете Проfile + any settable button on the left (UP, DOWN, LEFT, RIGHT, L, ZL, L3, VRL) + Проfile.
  • Right Back Button (FR): Притиснете Проfile + any settable button on the right (A, B, X, Y, R, ZR, R3, VRR) + Проfile.

  Копчињата FL и FR можат да снимат до 21 вредност на копчето, а излезот ќе го следи временскиот интервал на запишувањето.
• Back Button Setting Indicator: Првиот пат кога ќе го притиснете копчето Profile button for setting, the LED will change from white to blue and flash. After the setting is complete, pressing the Profile button will show a solid blue light.
• Clear Back Button Settings: When connected to the host, hold both the left and right handle Profile buttons for 3 seconds. The original functions set on the FL and FR buttons will be cleared, and the LED will turn to a long white light.

3. Motor Vibration Adjustment

Adjust the intensity of the motor vibration:

• Начин на прилагодување: While connected, press ТУРБО + (corresponding) joystick up to enhance vibration, or надолу to weaken it. A 2-second vibration prompt will confirm successful adjustment.
• Нивоа на вибрации: 100% - 70% - 30% - 0%. The default intensity is 70%.

Image: Adjustable vibration rumble levels.

4. ABXY Light Adjustment

The ABXY buttons feature adjustable illumination:

• While connected, press ТУРБО + double-click the right joystick to turn the light effect on or off.
• Притиснете ТУРБО + long-press the right joystick to adjust the brightness of the ABXY buttons.

Image: Illuminated ABXY buttons.

5. Factory Setting "Lock Mode"

This mode prevents accidental input or changes to settings.

• Метод на поставување: When the controller is in sleep mode, press and hold the "SL" и "SYNC" buttons for 5 seconds. The channel indicator LED1 will light up and flash slowly 3 times.
• Режим на отклучување: To unlock, charge the controller with a USB cable while it is mounted on the Switch console rail.

6. Rocker Ring Replacement

The joystick rings are interchangeable for different gaming preferences (e.g., round for racing, octagonal for fighting games).

Image: Interchangeable Joystick Rings.

1. Step 1: Rotate the Rocker Ring
   Rotate the rocker circle alignment line counter-clockwise until it forms a 45° angle with the handle alignment point.


Diagram: Rotate the rocker ring to a 45-degree angle.

2. Step 2: Remove the Rocker Ring
   Pull up the rocker ring and rocker cap vertically to remove them.


Diagram: Pull up the rocker ring and cap.

3. Step 3: Install the New Rocker Ring
   Place the new rocker ring pins against the handle alignment point and press down firmly.


Diagram: Press the new rocker ring into position.

4. Step 4: Secure the Rocker Ring
   Rotate the rocker ring 45° clockwise to align the rocker ring alignment line with the handle alignment point, securing the replacement.

7. Calibration Rocker

To calibrate the joysticks and prevent drift:

1. Connect the controller to the Switch console.
2. Одете на Системски поставки > Контролори и сензори > Калибрирајте ги контролните стапчиња.
3. Select the joystick you wish to calibrate and press the X копчето, потоа на A копче.
4. Follow the on-screen prompts to move the stick up, down, left, right, and in a circle.

Image: Nintendo Switch joystick calibration screen.

Забелешка: If the cursor bounces outside the innermost circle during calibration, press the B button to exit and correct it again.

Совети за корисникот

• This controller is compatible with multiple Nintendo Switch models, including the original Switch, Switch 2, Switch OLED, and Switch Lite.
• The Hall Effect joysticks are designed to prevent drift, offering a more reliable gaming experience over time.
• The mecha-tactile triggers provide a lighter feel and shorter travel distance (0.3mm), which can be beneficial for games requiring quick reactions.

Решавање проблеми

• Контролерот не се поврзува: Ensure the controller is charged. For wireless connection, verify the Switch console is in 'Change Grip/Order' mode and you are pressing the SYNC button on the controller. For wired, ensure it's securely attached to the console.
• Слаба батерија: If the channel light flashes, charge the controller immediately.
• Движење на џојстикот: Perform a joystick calibration through the Switch System Settings as described in the 'Calibration Rocker' section.
• Accidental Inputs/Settings Changes: If you experience unintended inputs or settings changes, activate the 'Factory Setting "Lock Mode"' to prevent further issues.

Гаранција и поддршка

Please follow the instructions for use strictly. If you encounter any problems during use, you can contact us for consultation and solution. Our email is: service@nyxigaming.com. We will handle your inquiry within 24 hours.

Безбедносни мерки на претпазливост

• Не го изложувајте производот на течност.
• Не расклопувајте го производот.
• Избегнувајте паѓање на производот.
• Avoid exposing the product to extremely high or low temperatures.

The symbol indicates that the product should not be disposed of with household waste but should be brought to an appropriate collection point for recycling. According to local regulations, do not dispose of the product or rechargeable battery with normal household waste. Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.