1. Вовед
The Flipsky FT85BS V2.0 ESC is a high-performance electronic speed controller designed for a wide range of electric vehicles, including electric skateboards, scooters, ebikes, and robotics. It features an ARM Cortex-M4 CPU (AT32F403ARCT7) with a clock speed of 240MHz, enabling a max PWM switching frequency of 25KHz for improved motor RPM. The controller utilizes an aluminum-based PCB, ensuring excellent heat dissipation for reliable operation.
This manual provides essential information for the proper installation, operation, and maintenance of your FT85BS V2.0 ESC.
2. Спецификации
| Карактеристика | Спецификација |
|---|---|
| Модел | FT85BS V2.0 |
| Фирмвер | V1.4 или понова верзија (поддржано е ажурирање на фирмверот преку алатката Flipsky ESC) |
| Voltage | 14-84V (safe for 4-20S) |
| Континуирана струја | 50V/60A; 75V/50A; 84V/40A (depends on mounting, ambient temperature, and air/water circulation) |
| Врвна струја | 250 А |
| Пристаништа за комуникација | USB, CAN, UART, PPM, ADC |
| Поддршка за влезни сигнали | PPM, ADC, UART (компатибилен само со далечинските управувачи FLIPSKY VX4 и VX3Pro во моментов), PAS |
| Startup Modes Support | IPDS (без сензор), HFPI (без сензор), HALL (со сензор), Кодер (ABI, AS5047 кодер SPI интерфејс) |
| BEC | 5V@1A |
| Multiple Speed Gear Levels | Ниско, Средно, Високо, Обратно |
| Програмабилна | Да |
| Регенеративен капацитет | Да |
| Големина на мотор/жица за напојување | 12 AWG |
| Dimensions (Including Alu. Case) | L110.5 * W55 * H30 mm |
| Power Switch Button Color | Црвено |
| Материјал | Метал |
| Препорачана возраст | 14+ години |
Димензии
3. Поставување и инсталација
3.1 Приклучоци за жици
Ensure all connections are secure and correctly oriented before powering on the device. Refer to the diagrams below for detailed wiring instructions.
Connecting with Throttle and Brake
Connecting with Bluetooth Module
Connecting with VX4 Remote
3.2 Програмирање
The FT85BS V2.0 ESC is highly programmable, allowing compatibility with various motor types, battery voltages, and control methods. Programming can be done via the Flipsky ESC Tool or a compatible Flipsky remote controller.
Programming via Flipsky ESC Tool
Connect the ESC to your computer via the USB port. Use the Flipsky ESC Tool software to configure motor parameters, battery settings, and other control options. Ensure the firmware is V1.4 or above for full compatibility.
Programming via Flipsky VX4 Remote
The ESC can also be programmed using a Flipsky VX4 remote controller (firmware version VX4_V1.4.0 or above). This allows for convenient on-the-go adjustments to settings such as motor rated current identification.
4. Упатства за работа
The FT85BS V2.0 ESC supports various control types and startup modes to suit different applications.
4.1 Control Types
- Тековна контрола: Ја регулира струјата на моторот.
- Контрола на работниот циклус: Controls the motor speed based on PWM duty cycle.
- Контрола на брзина: Ја одржува саканата брзина на моторот.
- Контрола на позицијата: For precise motor positioning.
4.2 Startup Modes
- IPDS (Sensorless): Inductance Position Detection System for sensorless motor startup.
- HFPI (Sensorless): High-Frequency Pulse Injection for sensorless motor startup.
- HALL (Sensored): Utilizes Hall sensors for precise motor commutation.
- Encoder (ABI, AS5047 encoder SPI interface): Supports various encoder types for advanced control.
4.3 Speed Gear Levels
The ESC supports multiple speed gear levels: Low, Medium, High, and Reverse, allowing for flexible control based on user preference and application requirements.
4.4 Regenerative Capacity
The FT85BS V2.0 ESC features regenerative braking, which allows energy to be recovered and returned to the battery during deceleration, improving efficiency and extending range.
5. Одржување
To ensure the longevity and optimal performance of your Flipsky FT85BS V2.0 ESC, follow these maintenance guidelines:
- Редовна инспекција: Periodically check all wiring connections for looseness, corrosion, or damage. Ensure the motor and power wires (12 AWG) are in good condition.
- Чистота: Keep the ESC free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning. Avoid using solvents or harsh chemicals.
- Дисипација на топлина: The aluminum case and PCB are designed for excellent heat dissipation. Ensure adequate airflow around the ESC, especially during high-current operation. Avoid obstructing the cooling fins.
- Ажурирања на фирмверот: Regularly check the Flipsky website for the latest firmware updates. Keeping your firmware up-to-date can improve performance, add new features, and fix bugs.
- Еколошки услови: Operate the ESC within its specified temperature and humidity ranges. Extreme conditions can affect performance and lifespan.
6 Смена на проблеми
The FT85BS V2.0 ESC incorporates several protection functions to prevent damage. If you encounter issues, consider the following:
6.1 Заштитни функции
- Низок и висок волуменtagд Заштита: The ESC will shut down or limit power if the battery voltage goes outside the safe operating range (14-84V). Check your battery voltagд и врски.
- Заштита од прекумерна струја: If the motor draws excessive current, the ESC will protect itself. This could indicate a motor issue, a short circuit, or an overloaded system.
- Temperature Abnormally Protection: The ESC monitors its internal temperature and the motor temperature (if a sensor is used). If temperatures exceed safe limits, power will be reduced or cut off. Ensure proper cooling and avoid continuous high-load operation.
- MOSFET-и заштита од прегревање и пренапонска заштита: Специфична заштита за моќните MOSFET-и.
- Заштита од прекумерно празнење на батеријата: Prevents damage to your battery by cutting off power when the voltage паѓа премногу ниско.
- Заштита од прегревање на моторот: If a motor temperature sensor is connected and configured, the ESC will protect the motor from overheating.
6.2 Општи чекори за решавање проблеми
- Проверете ги сите врски: Осигурајте се дека сите жици се безбедно поврзани и без оштетувања.
- Verify power supply: Confirm your battery is charged and providing the correct voltage.
- Review ESC Tool settings: Connect to the Flipsky ESC Tool and check all configured parameters, especially motor identification and battery cut-off voltagес.
- Inspect motor: Check the motor for any physical damage or obstructions.
- Ресетирај на стандардно: If unsure about settings, try resetting the ESC to factory defaults via the ESC Tool and reconfigure step-by-step.
7. Кориснички совети
- Proper Parameter Setup: Take your time to correctly set up all motor and battery parameters using the Flipsky ESC Tool. Incorrect settings can lead to poor performance or damage.
- Компатибилност на фирмверот: When using a Flipsky VX4 remote for programming, ensure its firmware version is VX4_V1.4.0 or above for optimal compatibility and functionality.
- Управување со топлина: While the aluminum case provides good heat dissipation, consider your application's environment. In high-power or enclosed setups, additional cooling might be beneficial to prevent thermal throttling.
- Управување со жици: Organize and secure all wires to prevent them from snagging, rubbing, or coming loose during operation. This helps avoid intermittent connections and potential shorts.
8. Гаранција и поддршка
For warranty information, technical support, or further assistance, please contact Flipsky customer service or visit the official Flipsky webсајт на https://flipsky.net/. Please have your product model and purchase details ready when contacting support.
